[alsa-devel] [PATCH 1/3] sound/soc/codecs: add LAPIS Semiconductor ML26124

[Mark Brown]

On Tue, Nov 22, 2011 at 07:47:10PM +0900, Tomoya MORINAGA wrote:
> 2011/11/21 Mark Brown <broonie at opensource.wolfsonmicro.com> wrote:

> BTW, What's TLV ? Let me know the full spell of this "TLV".

Tag/Length/Value.

> >> +static const struct snd_kcontrol_new ml26124_dsp_controls[] = {
> >> +     SOC_SINGLE("Play Limitter ON/OFF", ML26124_FILTER_EN, 0, 1, 0),

> Do you mean SOC_SINGLE("Play Limitter Switch", ML26124_FILTER_EN, 0, 1, 0) ?

Yes.

> >> +     SOC_SINGLE("Set ALC position", ML26124_FILTER_EN, 5, 1, 0),

> > What does this actually do?  From the name it *really* doesn't look like
> > a mixer input.

> The above means where connects the ALC.
> So, this doesn't relate to mixer input.

If this control is not a mixer input it should not be a mixer input in
the driver.  Though with your explanation I still don't understand what
it does so presumably the naming also needs to be improved.

> However I couldn't understand the meaning of the widgets. So I didn't
> write anything.

See Documentation/sound/alsa/soc/dapm.txt.

> >> +static int snd_card_codec_reg_read(struct ml26124_priv *priv,
> >> +                                unsigned char reg, unsigned char *val)
> >> +{
> >> +     unsigned char data;
> >> +     struct i2c_client *i2c;

> > Use the standard register access code, don't open code things in your
> > driver unless there's a good reason to.  Current best practice for most
> > I2C or SPI devices is to use regmap, see any recently added driver for
> > examples.

> What's "regmap" mean ? or do you mean drivers/mfd/* ?
> Could you tell me this ?

drivers/base/regmap and also grep in sound/soc/codecs/*.c

> > Use snd_soc_update_bits() and the other standard register access
> > functions.

> Using snd_soc_update_bits(), need to register ".read" method.

Or use a cache.

> Is the same as the above  snd_card_codec_reg_read ?

I don't understand this question.