[alsa-devel] [PATCH 6/6] ASoC: davinci-pcm: convert to BATCH mode
Liam Girdwood
lrg at ti.com
Wed May 25 11:52:44 CEST 2011
On 24/05/11 19:50, Ben Gardiner wrote:
> The davinci-pcm driver's snd_pcm_ops pointer function currently calls into
> the edma controller driver to read the current positions of the edma channels
> to determine pos to return to the ALSA framework. In particular,
> davinci_pcm_pointer() calls edma_get_position() and the latter has a comment
> indicating that "Its channel should not be active when this is called" whereas
> the channel is surely active when snd_pcm_ops.pointer is called.
>
> The operation of davinci-pcm in capture and playback appears to follow close
> the other pcm drivers who export SNDRV_PCM_INFO_BATCH except that davinci-pcm
> does not report it's positions from pointer() using the last transferred
> chunk. Instead it peeks directly into the edma controller to determine the
> current position as discussed above.
>
> Convert the davinci-pcm driver to BATCH mode: count the periods elapsed in the
> prtd->period member and use its value to report the 'pos' to the alsa
> framework in the davinci_pcm_pointer function.
>
> There is a phase offset of 2 periods between the position used by dma setup
> and the position reported in the pointer function. Either +2 in the dma
> setup or -2 in the pointer function (with wrapping, both) accounts for this
> offset -- I opted for the latter since it makes the first-time setup clearer.
>
> Signed-off-by: Ben Gardiner <bengardiner at nanometrics.ca>
> Reviewed-by: Steven Faludi <stevenfaludi at nanometrics.ca>
>
> ---
> sound/soc/davinci/davinci-pcm.c | 67 +++++++++++----------------------------
> 1 files changed, 19 insertions(+), 48 deletions(-)
>
> diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c
> index fedca81..fa8fc61 100644
> --- a/sound/soc/davinci/davinci-pcm.c
> +++ b/sound/soc/davinci/davinci-pcm.c
> @@ -65,7 +65,8 @@ static void print_buf_info(int slot, char *name)
> static struct snd_pcm_hardware pcm_hardware_playback = {
> .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
> SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
> - SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME),
> + SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME|
> + SNDRV_PCM_INFO_BATCH),
> .formats = DAVINCI_PCM_FMTBITS,
> .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
> SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
> @@ -87,7 +88,8 @@ static struct snd_pcm_hardware pcm_hardware_playback = {
> static struct snd_pcm_hardware pcm_hardware_capture = {
> .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
> SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
> - SNDRV_PCM_INFO_PAUSE),
> + SNDRV_PCM_INFO_PAUSE |
> + SNDRV_PCM_INFO_BATCH),
> .formats = DAVINCI_PCM_FMTBITS,
> .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
> SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
> @@ -231,8 +233,6 @@ static void davinci_pcm_enqueue_dma(struct snd_pcm_substream *substream)
> else
> edma_set_transfer_params(link, acnt, fifo_level, count,
> fifo_level, ABSYNC);
> -
> - davinci_pcm_period_elapsed(substream);
> }
>
> static void davinci_pcm_dma_irq(unsigned link, u16 ch_status, void *data)
> @@ -247,12 +247,13 @@ static void davinci_pcm_dma_irq(unsigned link, u16 ch_status, void *data)
> return;
>
> if (snd_pcm_running(substream)) {
> + spin_lock(&prtd->lock);
> if (prtd->ram_channel < 0) {
> /* No ping/pong must fix up link dma data*/
> - spin_lock(&prtd->lock);
> davinci_pcm_enqueue_dma(substream);
> - spin_unlock(&prtd->lock);
> }
> + davinci_pcm_period_elapsed(substream);
> + spin_unlock(&prtd->lock);
> snd_pcm_period_elapsed(substream);
> }
> }
> @@ -588,6 +589,7 @@ static int davinci_pcm_prepare(struct snd_pcm_substream *substream)
> {
> struct davinci_runtime_data *prtd = substream->runtime->private_data;
>
> + davinci_pcm_period_reset(substream);
> if (prtd->ram_channel >= 0) {
> int ret = ping_pong_dma_setup(substream);
> if (ret < 0)
> @@ -603,15 +605,19 @@ static int davinci_pcm_prepare(struct snd_pcm_substream *substream)
> print_buf_info(prtd->asp_link[0], "asp_link[0]");
> print_buf_info(prtd->asp_link[1], "asp_link[1]");
>
> + davinci_pcm_period_elapsed(substream);
> + davinci_pcm_period_elapsed(substream);
I assume these are to do with the 2 period phase offset you have so it's probably better to comment this here too.
> +
> return 0;
> }
> - davinci_pcm_period_reset(substream);
> davinci_pcm_enqueue_dma(substream);
> + davinci_pcm_period_elapsed(substream);
>
> /* Copy self-linked parameter RAM entry into master channel */
> edma_read_slot(prtd->asp_link[0], &prtd->asp_params);
> edma_write_slot(prtd->asp_channel, &prtd->asp_params);
> davinci_pcm_enqueue_dma(substream);
> + davinci_pcm_period_elapsed(substream);
>
> return 0;
> }
> @@ -623,51 +629,16 @@ davinci_pcm_pointer(struct snd_pcm_substream *substream)
> struct davinci_runtime_data *prtd = runtime->private_data;
> unsigned int offset;
> int asp_count;
> - dma_addr_t asp_src, asp_dst;
> + unsigned int period_size = snd_pcm_lib_period_bytes(substream);
>
> spin_lock(&prtd->lock);
> - if (prtd->ram_channel >= 0) {
> - int ram_count;
> - int mod_ram;
> - dma_addr_t ram_src, ram_dst;
> - unsigned int period_size = snd_pcm_lib_period_bytes(substream);
> - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> - /* reading ram before asp should be safe
> - * as long as the asp transfers less than a ping size
> - * of bytes between the 2 reads
> - */
> - edma_get_position(prtd->ram_channel,
> - &ram_src, &ram_dst);
> - edma_get_position(prtd->asp_channel,
> - &asp_src, &asp_dst);
> - asp_count = asp_src - prtd->asp_params.src;
> - ram_count = ram_src - prtd->ram_params.src;
> - mod_ram = ram_count % period_size;
> - mod_ram -= asp_count;
> - if (mod_ram < 0)
> - mod_ram += period_size;
> - else if (mod_ram == 0) {
> - if (snd_pcm_running(substream))
> - mod_ram += period_size;
> - }
> - ram_count -= mod_ram;
> - if (ram_count < 0)
> - ram_count += period_size * runtime->periods;
> - } else {
> - edma_get_position(prtd->ram_channel,
> - &ram_src, &ram_dst);
> - ram_count = ram_dst - prtd->ram_params.dst;
> - }
> - asp_count = ram_count;
> - } else {
> - edma_get_position(prtd->asp_channel, &asp_src, &asp_dst);
> - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
> - asp_count = asp_src - runtime->dma_addr;
> - else
> - asp_count = asp_dst - runtime->dma_addr;
> - }
> + asp_count = prtd->period - 2;
> spin_unlock(&prtd->lock);
>
> + if (asp_count < 0)
> + asp_count += runtime->periods;
> + asp_count *= period_size;
> +
> offset = bytes_to_frames(runtime, asp_count);
> if (offset >= runtime->buffer_size)
> offset = 0;
More information about the Alsa-devel
mailing list