[alsa-devel] model needed for Clevo P150HM (Realtek ALC892)

[Julian Sikorski]

W dniu 30.06.2011 21:28, Takashi Iwai pisze:
> At Thu, 30 Jun 2011 20:09:49 +0200,
> Julian Sikorski wrote:
>>
>> $ dmesg | grep XXX
>> [   14.813013] XXX alc662_auto_fill_dac_nids called
>> [   14.813015] XXX line_outs=1, 14/0/0
>> [   14.813016] XXX hp_outs=1, 1b/0/0
>> [   14.813018] XXX spk_outs=0, 0/0/0
>> [   14.813186] XXX filled dacs: 2/0/0/0/0, hp 0, ext 0/0/0
>> [   14.813187] XXX swap primary out to HP
>> [   14.813188] XXX spk=14
>> [   14.813190] XXX line=1b
>> [   14.813191] XXX alc662_auto_fill_dac_nids called
>> [   14.813192] XXX line_outs=1, 1b/0/0
>> [   14.813194] XXX hp_outs=0, 0/0/0
>> [   14.813195] XXX spk_outs=1, 14/0/0
>> [   14.813311] XXX filled dacs: 2/0/0/0/0, hp 0, ext 0/0/0
>> [   14.813560] XXX added multi-io pin 1a, dac 3
>> [   14.813814] XXX added multi-io pin 18, dac 4
>> [   14.813818] XXX create mixer ch 0 pin 1b dac 2 mix c
>> [   14.813821] XXX create mixer ch 1 pin 1a dac 3 mix d
>> [   14.813825] XXX create mixer ch 2 pin 18 dac 4 mix e
> 
> How about the fix below?
> 
> 
> Takashi

It works, thanks! In more detail, the Speaker/Headphone situation is
back to 2.6.38 state - you can regulate them independently, but muting
one mutes the other. LFE/Center and Surround keep working correctly too.
The new output of alsa-info.sh:
http://www.alsa-project.org/db/?f=45bc0df9747371b348bde6c4aa508b2ba44aff47

$ dmesg | grep XXX
[   13.944531] XXX alc662_auto_fill_dac_nids called
[   13.944533] XXX line_outs=1, 14/0/0
[   13.944534] XXX hp_outs=1, 1b/0/0
[   13.944536] XXX spk_outs=0, 0/0/0
[   13.944631] XXX check single for pin 14, sel 14
[   13.944632] XXX pin 14 coupled with a single DAC
[   13.944843] XXX check single for pin 1b, sel 1b
[   13.944845] XXX filled dacs: 2/0/0/0/0, hp 0, ext 0/0/0
[   13.944847] XXX swap primary out to HP
[   13.944848] XXX spk=14
[   13.944849] XXX line=1b
[   13.944850] XXX alc662_auto_fill_dac_nids called
[   13.944852] XXX line_outs=1, 1b/0/0
[   13.944853] XXX hp_outs=0, 0/0/0
[   13.944855] XXX spk_outs=1, 14/0/0
[   13.944856] XXX check single for pin 1b, sel 1b
[   13.944858] XXX check single for pin 14, sel 14
[   13.944859] XXX pin 14 coupled with a single DAC
[   13.944945] XXX filled dacs: 3/0/0/0/0, hp 0, ext 2/0/0
[   13.945189] XXX added multi-io pin 1a, dac 4
[   13.945440] XXX added multi-io pin 18, dac 5
[   13.945446] XXX create mixer ch 0 pin 1b dac 3 mix d
[   13.945452] XXX create mixer ch 1 pin 1a dac 4 mix e
[   13.945457] XXX create mixer ch 2 pin 18 dac 5 mix f

So it seems that the only things remaining are the SPDIF/rear channel
jack and the coupled muting issue.
Thanks for all the help so far,

Julian