[alsa-devel] [PATCH 3/4] ASoC: Error out when FLL lock interrupt is not delivered on WM8915

[Mark Brown]

When the FLL locks on the WM8915 an interrupt is generated.  For safety
error out if we don't get that interrupt when the IRQ output of the
WM8915 is hooked up.  Since we *really* expect an interrupt but the
threaded IRQ handler may take a bit longer than expected to get
scheduled also dramatically increase the delay in this case.

Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
---
 sound/soc/codecs/wm8915.c |   16 ++++++++++++++--
 1 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8915.c b/sound/soc/codecs/wm8915.c
index 6324d4e..62e72fc 100644
--- a/sound/soc/codecs/wm8915.c
+++ b/sound/soc/codecs/wm8915.c
@@ -2009,6 +2009,7 @@ static int wm8915_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
 			  unsigned int Fref, unsigned int Fout)
 {
 	struct wm8915_priv *wm8915 = snd_soc_codec_get_drvdata(codec);
+	struct i2c_client *i2c = to_i2c_client(codec->dev);
 	struct _fll_div fll_div;
 	unsigned long timeout;
 	int ret, reg;
@@ -2094,7 +2095,18 @@ static int wm8915_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
 	else
 		timeout = msecs_to_jiffies(2);
 
-	wait_for_completion_timeout(&wm8915->fll_lock, timeout);
+	/* Allow substantially longer if we've actually got the IRQ */
+	if (i2c->irq)
+		timeout *= 1000;
+
+	ret = wait_for_completion_timeout(&wm8915->fll_lock, timeout);
+
+	if (ret == 0 && i2c->irq) {
+		dev_err(codec->dev, "Timed out waiting for FLL\n");
+		ret = -ETIMEDOUT;
+	} else {
+		ret = 0;
+	}
 
 	dev_dbg(codec->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout);
 
@@ -2102,7 +2114,7 @@ static int wm8915_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
 	wm8915->fll_fout = Fout;
 	wm8915->fll_src = source;
 
-	return 0;
+	return ret;
 }
 
 #ifdef CONFIG_GPIOLIB
-- 
1.7.5.3