[alsa-devel] [PATCH 3/3] ASoC: sgtl5000: fix cache handling
Wolfram Sang
w.sang at pengutronix.de
Mon Jul 18 17:53:05 CEST 2011
Cache handling in this driver is seriously broken. The chip has 16-bit
registers, yet their register numbering also increases by 2 per register, i.e.
there are only even-numbered registers. The default cache in this driver,
though, simply increments register numbers, so it does need some mapping as
seen in sgtl5000_restore_regs(), note the '>> 1':
snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL,
cache[SGTL5000_CHIP_LINREG_CTRL >> 1]);
That, of course, won't work with snd_soc_update_bits(). (Thus, we won't even
notice the missing register 0x1c in the default regs which shifted all follwing
registers to wrong values.) Noticed on the MX28EVK where enabling the regulators
simply locked up the chip.
Refactor the routines and use a properly sized default_regs array which matches
the register layout of the underlying chip. Also saves some code which should
make up for the bigger array a little.
Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
Cc: Dong Aisheng <b29396 at freescale.com>
Cc: Zeng Zhaoming <b32542 at freescale.com>
Cc: Mark Brown <broonie at opensource.wolfsonmicro.com>
---
sound/soc/codecs/sgtl5000.c | 128 ++++++++++++-------------------------------
1 files changed, 35 insertions(+), 93 deletions(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 76258f2..7e4066e 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -33,73 +33,31 @@
#define SGTL5000_DAP_REG_OFFSET 0x0100
#define SGTL5000_MAX_REG_OFFSET 0x013A
-/* default value of sgtl5000 registers except DAP */
-static const u16 sgtl5000_regs[SGTL5000_MAX_REG_OFFSET >> 1] = {
- 0xa011, /* 0x0000, CHIP_ID. 11 stand for revison 17 */
- 0x0000, /* 0x0002, CHIP_DIG_POWER. */
- 0x0008, /* 0x0004, CHIP_CKL_CTRL */
- 0x0010, /* 0x0006, CHIP_I2S_CTRL */
- 0x0000, /* 0x0008, reserved */
- 0x0008, /* 0x000A, CHIP_SSS_CTRL */
- 0x0000, /* 0x000C, reserved */
- 0x020c, /* 0x000E, CHIP_ADCDAC_CTRL */
- 0x3c3c, /* 0x0010, CHIP_DAC_VOL */
- 0x0000, /* 0x0012, reserved */
- 0x015f, /* 0x0014, CHIP_PAD_STRENGTH */
- 0x0000, /* 0x0016, reserved */
- 0x0000, /* 0x0018, reserved */
- 0x0000, /* 0x001A, reserved */
- 0x0000, /* 0x001E, reserved */
- 0x0000, /* 0x0020, CHIP_ANA_ADC_CTRL */
- 0x1818, /* 0x0022, CHIP_ANA_HP_CTRL */
- 0x0111, /* 0x0024, CHIP_ANN_CTRL */
- 0x0000, /* 0x0026, CHIP_LINREG_CTRL */
- 0x0000, /* 0x0028, CHIP_REF_CTRL */
- 0x0000, /* 0x002A, CHIP_MIC_CTRL */
- 0x0000, /* 0x002C, CHIP_LINE_OUT_CTRL */
- 0x0404, /* 0x002E, CHIP_LINE_OUT_VOL */
- 0x7060, /* 0x0030, CHIP_ANA_POWER */
- 0x5000, /* 0x0032, CHIP_PLL_CTRL */
- 0x0000, /* 0x0034, CHIP_CLK_TOP_CTRL */
- 0x0000, /* 0x0036, CHIP_ANA_STATUS */
- 0x0000, /* 0x0038, reserved */
- 0x0000, /* 0x003A, CHIP_ANA_TEST2 */
- 0x0000, /* 0x003C, CHIP_SHORT_CTRL */
- 0x0000, /* reserved */
-};
-
-/* default value of dap registers */
-static const u16 sgtl5000_dap_regs[] = {
- 0x0000, /* 0x0100, DAP_CONTROL */
- 0x0000, /* 0x0102, DAP_PEQ */
- 0x0040, /* 0x0104, DAP_BASS_ENHANCE */
- 0x051f, /* 0x0106, DAP_BASS_ENHANCE_CTRL */
- 0x0000, /* 0x0108, DAP_AUDIO_EQ */
- 0x0040, /* 0x010A, DAP_SGTL_SURROUND */
- 0x0000, /* 0x010C, DAP_FILTER_COEF_ACCESS */
- 0x0000, /* 0x010E, DAP_COEF_WR_B0_MSB */
- 0x0000, /* 0x0110, DAP_COEF_WR_B0_LSB */
- 0x0000, /* 0x0112, reserved */
- 0x0000, /* 0x0114, reserved */
- 0x002f, /* 0x0116, DAP_AUDIO_EQ_BASS_BAND0 */
- 0x002f, /* 0x0118, DAP_AUDIO_EQ_BAND0 */
- 0x002f, /* 0x011A, DAP_AUDIO_EQ_BAND2 */
- 0x002f, /* 0x011C, DAP_AUDIO_EQ_BAND3 */
- 0x002f, /* 0x011E, DAP_AUDIO_EQ_TREBLE_BAND4 */
- 0x8000, /* 0x0120, DAP_MAIN_CHAN */
- 0x0000, /* 0x0122, DAP_MIX_CHAN */
- 0x0510, /* 0x0124, DAP_AVC_CTRL */
- 0x1473, /* 0x0126, DAP_AVC_THRESHOLD */
- 0x0028, /* 0x0128, DAP_AVC_ATTACK */
- 0x0050, /* 0x012A, DAP_AVC_DECAY */
- 0x0000, /* 0x012C, DAP_COEF_WR_B1_MSB */
- 0x0000, /* 0x012E, DAP_COEF_WR_B1_LSB */
- 0x0000, /* 0x0130, DAP_COEF_WR_B2_MSB */
- 0x0000, /* 0x0132, DAP_COEF_WR_B2_LSB */
- 0x0000, /* 0x0134, DAP_COEF_WR_A1_MSB */
- 0x0000, /* 0x0136, DAP_COEF_WR_A1_LSB */
- 0x0000, /* 0x0138, DAP_COEF_WR_A2_MSB */
- 0x0000, /* 0x013A, DAP_COEF_WR_A2_LSB */
+/* default value of sgtl5000 registers */
+static const u16 sgtl5000_regs[SGTL5000_MAX_REG_OFFSET] = {
+ [SGTL5000_CHIP_CLK_CTRL] = 0x0008,
+ [SGTL5000_CHIP_I2S_CTRL] = 0x0010,
+ [SGTL5000_CHIP_SSS_CTRL] = 0x0008,
+ [SGTL5000_CHIP_DAC_VOL] = 0x3c3c,
+ [SGTL5000_CHIP_PAD_STRENGTH] = 0x015f,
+ [SGTL5000_CHIP_ANA_HP_CTRL] = 0x1818,
+ [SGTL5000_CHIP_ANA_CTRL] = 0x0111,
+ [SGTL5000_CHIP_LINE_OUT_VOL] = 0x0404,
+ [SGTL5000_CHIP_ANA_POWER] = 0x7060,
+ [SGTL5000_CHIP_PLL_CTRL] = 0x5000,
+ [SGTL5000_DAP_BASS_ENHANCE] = 0x0040,
+ [SGTL5000_DAP_BASS_ENHANCE_CTRL] = 0x051f,
+ [SGTL5000_DAP_SURROUND] = 0x0040,
+ [SGTL5000_DAP_EQ_BASS_BAND0] = 0x002f,
+ [SGTL5000_DAP_EQ_BASS_BAND1] = 0x002f,
+ [SGTL5000_DAP_EQ_BASS_BAND2] = 0x002f,
+ [SGTL5000_DAP_EQ_BASS_BAND3] = 0x002f,
+ [SGTL5000_DAP_EQ_BASS_BAND4] = 0x002f,
+ [SGTL5000_DAP_MAIN_CHAN] = 0x8000,
+ [SGTL5000_DAP_AVC_CTRL] = 0x0510,
+ [SGTL5000_DAP_AVC_THRESHOLD] = 0x1473,
+ [SGTL5000_DAP_AVC_ATTACK] = 0x0028,
+ [SGTL5000_DAP_AVC_DECAY] = 0x0050,
};
/* regulator supplies for sgtl5000, VDDD is an optional external supply */
@@ -1023,12 +981,10 @@ static int sgtl5000_suspend(struct snd_soc_codec *codec, pm_message_t state)
static int sgtl5000_restore_regs(struct snd_soc_codec *codec)
{
u16 *cache = codec->reg_cache;
- int i;
- int regular_regs = SGTL5000_CHIP_SHORT_CTRL >> 1;
+ u16 reg;
/* restore regular registers */
- for (i = 0; i < regular_regs; i++) {
- int reg = i << 1;
+ for (reg = 0; reg <= SGTL5000_CHIP_SHORT_CTRL; reg += 2) {
/* this regs depends on the others */
if (reg == SGTL5000_CHIP_ANA_POWER ||
@@ -1038,35 +994,31 @@ static int sgtl5000_restore_regs(struct snd_soc_codec *codec)
reg == SGTL5000_CHIP_CLK_CTRL)
continue;
- snd_soc_write(codec, reg, cache[i]);
+ snd_soc_write(codec, reg, cache[reg]);
}
/* restore dap registers */
- for (i = SGTL5000_DAP_REG_OFFSET >> 1;
- i < SGTL5000_MAX_REG_OFFSET >> 1; i++) {
- int reg = i << 1;
-
- snd_soc_write(codec, reg, cache[i]);
- }
+ for (reg = SGTL5000_DAP_REG_OFFSET; reg < SGTL5000_MAX_REG_OFFSET; reg += 2)
+ snd_soc_write(codec, reg, cache[reg]);
/*
* restore power and other regs according
* to set_power() and set_clock()
*/
snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL,
- cache[SGTL5000_CHIP_LINREG_CTRL >> 1]);
+ cache[SGTL5000_CHIP_LINREG_CTRL]);
snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER,
- cache[SGTL5000_CHIP_ANA_POWER >> 1]);
+ cache[SGTL5000_CHIP_ANA_POWER]);
snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL,
- cache[SGTL5000_CHIP_CLK_CTRL >> 1]);
+ cache[SGTL5000_CHIP_CLK_CTRL]);
snd_soc_write(codec, SGTL5000_CHIP_REF_CTRL,
- cache[SGTL5000_CHIP_REF_CTRL >> 1]);
+ cache[SGTL5000_CHIP_REF_CTRL]);
snd_soc_write(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
- cache[SGTL5000_CHIP_LINE_OUT_CTRL >> 1]);
+ cache[SGTL5000_CHIP_LINE_OUT_CTRL]);
return 0;
}
@@ -1454,16 +1406,6 @@ static __devinit int sgtl5000_i2c_probe(struct i2c_client *client,
if (!sgtl5000)
return -ENOMEM;
- /*
- * copy DAP default values to default value array.
- * sgtl5000 register space has a big hole, merge it
- * at init phase makes life easy.
- * FIXME: should we drop 'const' of sgtl5000_regs?
- */
- memcpy((void *)(&sgtl5000_regs[0] + (SGTL5000_DAP_REG_OFFSET >> 1)),
- sgtl5000_dap_regs,
- SGTL5000_MAX_REG_OFFSET - SGTL5000_DAP_REG_OFFSET);
-
i2c_set_clientdata(client, sgtl5000);
ret = snd_soc_register_codec(&client->dev,
--
1.7.5.4
More information about the Alsa-devel
mailing list