[alsa-devel] [PATCH] ASoC: Use WM8994 FLL lock interrupt
Mark Brown
broonie at opensource.wolfsonmicro.com
Tue Jul 12 13:43:23 CEST 2011
If we have interrupts then wait for the FLL lock interrupt rather than
using dead reckoning when waiting for the FLL to start.
Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
---
sound/soc/codecs/wm8994.c | 40 +++++++++++++++++++++++++++++++++++++++-
sound/soc/codecs/wm8994.h | 3 +++
2 files changed, 42 insertions(+), 1 deletions(-)
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index d2dcaa2..f89ae47 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -1635,6 +1635,7 @@ static int _wm8994_set_fll(struct snd_soc_codec *codec, int id, int src,
int reg_offset, ret;
struct fll_div fll;
u16 reg, aif1, aif2;
+ unsigned long timeout;
aif1 = snd_soc_read(codec, WM8994_AIF1_CLOCKING_1)
& WM8994_AIF1CLK_ENA;
@@ -1726,7 +1727,15 @@ static int _wm8994_set_fll(struct snd_soc_codec *codec, int id, int src,
WM8994_FLL1_ENA | WM8994_FLL1_FRAC,
reg);
- msleep(5);
+ if (wm8994->fll_locked_irq) {
+ timeout = wait_for_completion_timeout(&wm8994->fll_locked[id],
+ msecs_to_jiffies(10));
+ if (timeout == 0)
+ dev_warn(codec->dev,
+ "Timed out waiting for FLL lock\n");
+ } else {
+ msleep(5);
+ }
}
wm8994->fll[id].in = freq_in;
@@ -1744,6 +1753,14 @@ static int _wm8994_set_fll(struct snd_soc_codec *codec, int id, int src,
return 0;
}
+static irqreturn_t wm8994_fll_locked_irq(int irq, void *data)
+{
+ struct completion *completion = data;
+
+ complete(completion);
+
+ return IRQ_HANDLED;
+}
static int opclk_divs[] = { 10, 20, 30, 40, 55, 60, 80, 120, 160 };
@@ -2879,6 +2896,9 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
wm8994->pdata = dev_get_platdata(codec->dev->parent);
wm8994->codec = codec;
+ for (i = 0; i < ARRAY_SIZE(wm8994->fll_locked); i++)
+ init_completion(&wm8994->fll_locked[i]);
+
if (wm8994->pdata && wm8994->pdata->micdet_irq)
wm8994->micdet_irq = wm8994->pdata->micdet_irq;
else if (wm8994->pdata && wm8994->pdata->irq_base)
@@ -2994,6 +3014,16 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
}
}
+ wm8994->fll_locked_irq = true;
+ for (i = 0; i < ARRAY_SIZE(wm8994->fll_locked); i++) {
+ ret = wm8994_request_irq(codec->control_data,
+ WM8994_IRQ_FLL1_LOCK + i,
+ wm8994_fll_locked_irq, "FLL lock",
+ &wm8994->fll_locked[i]);
+ if (ret != 0)
+ wm8994->fll_locked_irq = false;
+ }
+
/* Remember if AIFnLRCLK is configured as a GPIO. This should be
* configured on init - if a system wants to do this dynamically
* at runtime we can deal with that then.
@@ -3179,6 +3209,9 @@ err_irq:
wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC1_SHRT, wm8994);
if (wm8994->micdet_irq)
free_irq(wm8994->micdet_irq, wm8994);
+ for (i = 0; i < ARRAY_SIZE(wm8994->fll_locked); i++)
+ wm8994_free_irq(codec->control_data, WM8994_IRQ_FLL1_LOCK + i,
+ &wm8994->fll_locked[i]);
wm8994_free_irq(codec->control_data, WM8994_IRQ_DCS_DONE,
&wm8994->hubs);
err:
@@ -3190,11 +3223,16 @@ static int wm8994_codec_remove(struct snd_soc_codec *codec)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
struct wm8994 *control = codec->control_data;
+ int i;
wm8994_set_bias_level(codec, SND_SOC_BIAS_OFF);
pm_runtime_disable(codec->dev);
+ for (i = 0; i < ARRAY_SIZE(wm8994->fll_locked); i++)
+ wm8994_free_irq(codec->control_data, WM8994_IRQ_FLL1_LOCK + i,
+ &wm8994->fll_locked[i]);
+
wm8994_free_irq(codec->control_data, WM8994_IRQ_DCS_DONE,
&wm8994->hubs);
diff --git a/sound/soc/codecs/wm8994.h b/sound/soc/codecs/wm8994.h
index 0a1db04..1ab2266 100644
--- a/sound/soc/codecs/wm8994.h
+++ b/sound/soc/codecs/wm8994.h
@@ -11,6 +11,7 @@
#include <sound/soc.h>
#include <linux/firmware.h>
+#include <linux/completion.h>
#include "wm_hubs.h"
@@ -79,6 +80,8 @@ struct wm8994_priv {
int mclk[2];
int aifclk[2];
struct wm8994_fll_config fll[2], fll_suspend[2];
+ struct completion fll_locked[2];
+ bool fll_locked_irq;
int dac_rates[2];
int lrclk_shared[2];
--
1.7.5.4
More information about the Alsa-devel
mailing list