[alsa-devel] [PATCH v2 1/4] ASoC: WM8903: Expose GPIOs through gpiolib
Stephen Warren
swarren at nvidia.com
Wed Jan 19 21:50:02 CET 2011
Also, fix platform_data GPIO handling to have an explicit "don't touch this
pin" option.
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
include/sound/wm8903.h | 7 ++-
sound/soc/codecs/wm8903.c | 117 ++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 121 insertions(+), 3 deletions(-)
diff --git a/include/sound/wm8903.h b/include/sound/wm8903.h
index b4a0db2..c835f2c 100644
--- a/include/sound/wm8903.h
+++ b/include/sound/wm8903.h
@@ -12,7 +12,7 @@
#define __LINUX_SND_WM8903_H
/* Used to enable configuration of a GPIO to all zeros */
-#define WM8903_GPIO_NO_CONFIG 0x8000
+#define WM8903_GPIO_NO_CONFIG 0x10000
/*
* R6 (0x06) - Mic Bias Control 0
@@ -231,6 +231,8 @@
#define WM8903_GP5_DB_SHIFT 0 /* GP5_DB */
#define WM8903_GP5_DB_WIDTH 1 /* GP5_DB */
+#define WM8903_NUM_GPIO 5
+
struct wm8903_platform_data {
bool irq_active_low; /* Set if IRQ active low, default high */
@@ -243,7 +245,8 @@ struct wm8903_platform_data {
int micdet_delay; /* Delay after microphone detection (ms) */
- u32 gpio_cfg[5]; /* Default register values for GPIO pin mux */
+ int gpio_base;
+ u32 gpio_cfg[WM8903_NUM_GPIO]; /* Default register values for GPIO pin mux */
};
#endif
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index a2a446c..db641c5 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -2,6 +2,7 @@
* wm8903.c -- WM8903 ALSA SoC Audio driver
*
* Copyright 2008 Wolfson Microelectronics
+ * Copyright 2011 NVIDIA, Inc.
*
* Author: Mark Brown <broonie at opensource.wolfsonmicro.com>
*
@@ -19,6 +20,7 @@
#include <linux/init.h>
#include <linux/completion.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
@@ -213,6 +215,7 @@ static u16 wm8903_reg_defaults[] = {
};
struct wm8903_priv {
+ struct snd_soc_codec *codec;
int sysclk;
int irq;
@@ -230,6 +233,10 @@ struct wm8903_priv {
int mic_short;
int mic_last_report;
int mic_delay;
+
+#ifdef CONFIG_GPIOLIB
+ struct gpio_chip gpio_chip;
+#endif
};
static int wm8903_volatile_register(struct snd_soc_codec *codec, unsigned int reg)
@@ -1635,6 +1642,110 @@ static int wm8903_resume(struct snd_soc_codec *codec)
return 0;
}
+#ifdef CONFIG_GPIOLIB
+static inline struct wm8903_priv *gpio_to_wm8903(struct gpio_chip *chip)
+{
+ return container_of(chip, struct wm8903_priv, gpio_chip);
+}
+
+static int wm8903_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ if (offset >= WM8903_NUM_GPIO)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int wm8903_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ struct wm8903_priv *wm8903 = gpio_to_wm8903(chip);
+ struct snd_soc_codec *codec = wm8903->codec;
+
+ return snd_soc_update_bits(codec, WM8903_GPIO_CONTROL_1 + offset,
+ WM8903_GP1_DIR_MASK, WM8903_GP1_DIR);
+}
+
+static int wm8903_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct wm8903_priv *wm8903 = gpio_to_wm8903(chip);
+ struct snd_soc_codec *codec = wm8903->codec;
+ int reg;
+
+ reg = snd_soc_read(codec, WM8903_GPIO_CONTROL_1 + offset);
+
+ return (reg & WM8903_GP1_LVL_MASK) >> WM8903_GP1_LVL_SHIFT;
+}
+
+static int wm8903_gpio_direction_out(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct wm8903_priv *wm8903 = gpio_to_wm8903(chip);
+ struct snd_soc_codec *codec = wm8903->codec;
+
+ return snd_soc_update_bits(codec, WM8903_GPIO_CONTROL_1 + offset,
+ WM8903_GP1_DIR_MASK | WM8903_GP1_LVL_MASK,
+ value << WM8903_GP2_LVL_SHIFT);
+}
+
+static void wm8903_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct wm8903_priv *wm8903 = gpio_to_wm8903(chip);
+ struct snd_soc_codec *codec = wm8903->codec;
+
+ snd_soc_update_bits(codec, WM8903_GPIO_CONTROL_1 + offset,
+ WM8903_GP1_LVL_MASK, value << WM8903_GP1_LVL_SHIFT);
+}
+
+static struct gpio_chip wm8903_template_chip = {
+ .label = "wm8903",
+ .owner = THIS_MODULE,
+ .request = wm8903_gpio_request,
+ .direction_input = wm8903_gpio_direction_in,
+ .get = wm8903_gpio_get,
+ .direction_output = wm8903_gpio_direction_out,
+ .set = wm8903_gpio_set,
+ .can_sleep = 1,
+};
+
+static void wm8903_init_gpio(struct snd_soc_codec *codec)
+{
+ struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ struct wm8903_platform_data *pdata = dev_get_platdata(codec->dev);
+ int ret;
+
+ wm8903->gpio_chip = wm8903_template_chip;
+ wm8903->gpio_chip.ngpio = WM8903_NUM_GPIO;
+ wm8903->gpio_chip.dev = codec->dev;
+
+ if (pdata && pdata->gpio_base)
+ wm8903->gpio_chip.base = pdata->gpio_base;
+ else
+ wm8903->gpio_chip.base = -1;
+
+ ret = gpiochip_add(&wm8903->gpio_chip);
+ if (ret != 0)
+ dev_err(codec->dev, "Failed to add GPIOs: %d\n", ret);
+}
+
+static void wm8903_free_gpio(struct snd_soc_codec *codec)
+{
+ struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
+ int ret;
+
+ ret = gpiochip_remove(&wm8903->gpio_chip);
+ if (ret != 0)
+ dev_err(codec->dev, "Failed to remove GPIOs: %d\n", ret);
+}
+#else
+static void wm8903_init_gpio(struct snd_soc_codec *codec)
+{
+}
+
+static void wm8903_free_gpio(struct snd_soc_codec *codec)
+{
+}
+#endif
+
static int wm8903_probe(struct snd_soc_codec *codec)
{
struct wm8903_platform_data *pdata = dev_get_platdata(codec->dev);
@@ -1643,6 +1754,7 @@ static int wm8903_probe(struct snd_soc_codec *codec)
int trigger, irq_pol;
u16 val;
+ wm8903->codec = codec;
init_completion(&wm8903->wseq);
ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
@@ -1667,7 +1779,7 @@ static int wm8903_probe(struct snd_soc_codec *codec)
/* Set up GPIOs and microphone detection */
if (pdata) {
for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
- if (!pdata->gpio_cfg[i])
+ if (pdata->gpio_cfg[i] == WM8903_GPIO_NO_CONFIG)
continue;
snd_soc_write(codec, WM8903_GPIO_CONTROL_1 + i,
@@ -1749,12 +1861,15 @@ static int wm8903_probe(struct snd_soc_codec *codec)
ARRAY_SIZE(wm8903_snd_controls));
wm8903_add_widgets(codec);
+ wm8903_init_gpio(codec);
+
return ret;
}
/* power down chip */
static int wm8903_remove(struct snd_soc_codec *codec)
{
+ wm8903_free_gpio(codec);
wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
return 0;
}
--
1.7.1
More information about the Alsa-devel
mailing list