[alsa-devel] [PATCH] sound: usb-audio: Digidesign Mbox 2 Duplex mode support Fixed the tab indentation. Removed unnecessary comments. Put IDs in the right order. Removed support for spdif using a device_setup parameter, now only analogue duplex mode is supported.
damien.zammit at gmail.com
damien.zammit at gmail.com
Wed Jan 5 13:37:01 CET 2011
From: Damien Zammit <damien.zammit at gmail.com>
Clemens wrote last year:
>> +mbox2_reboot:
>> + snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
>> + 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012, 1000);
>> +
>> + if (bootresponse == MBOX2_BOOT_LOADING) {
>> + snd_printdd("device not ready, resending boot sequence...\n");
>> + goto mbox2_reboot;
>> + }
>This could be made a loop. And it could run infinitely long; maybe you
>should add a timeout. (How long does it usually need?)
I need help to write a loop with a timeout that is RT safe?
The device responds before 5 seconds from zero power to bootup.
---
sound/usb/midi.c | 12 ++++
sound/usb/quirks-table.h | 52 +++++++++++++++++++
sound/usb/quirks.c | 125 ++++++++++++++++++++++++++++++++++++++++++++++
sound/usb/quirks.h | 5 ++
sound/usb/usbaudio.h | 1 +
5 files changed, 195 insertions(+), 0 deletions(-)
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index 25bce7e..5dace7e 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -2122,6 +2122,18 @@ int snd_usbmidi_create(struct snd_card *card,
umidi->usb_protocol_ops = &snd_usbmidi_novation_ops;
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break;
+ case QUIRK_MIDI_MBOX2:
+ /* Digidesign Mbox 2 uses MIDIMAN MIDI protocol */
+ umidi->usb_protocol_ops = &snd_usbmidi_midiman_ops;
+ /*
+ * We have to make sure that the USB core looks
+ * again at interface 6 by calling usb_set_interface() on it.
+ */
+ usb_set_interface(umidi->dev, 6, 0);
+ memcpy(&endpoints[0], quirk->data,
+ sizeof(struct snd_usb_midi_endpoint_info));
+ err = 0;
+ break;
case QUIRK_MIDI_RAW_BYTES:
umidi->usb_protocol_ops = &snd_usbmidi_raw_ops;
/*
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index ad7079d..2ea3636 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2477,6 +2477,58 @@ YAMAHA_DEVICE(0x7010, "UB99"),
}
},
+/* DIGIDESIGN MBOX 2 */
+{
+ USB_DEVICE(0x0dba, 0x3000),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ .vendor_name = "Digidesign",
+ .product_name = "Mbox 2",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 1,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 3,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 4,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 5,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 6,
+ .type = QUIRK_MIDI_MBOX2,
+ .data = & (const struct snd_usb_midi_endpoint_info) {
+ .out_ep = 0x02,
+ .out_cables = 0x0001,
+ .in_ep = 0x81,
+ .in_interval = 0x01,
+ .in_cables = 0x0001
+ }
+
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
+
{
/*
* Some USB MIDI devices don't have an audio control interface,
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index cf8bf08..917b991 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -287,6 +287,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip,
[QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,
[QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,
[QUIRK_MIDI_NOVATION] = create_any_midi_quirk,
+ [QUIRK_MIDI_MBOX2] = create_any_midi_quirk,
[QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk,
[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
[QUIRK_MIDI_CME] = create_any_midi_quirk,
@@ -479,6 +480,9 @@ int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
if (chip->usb_id == USB_ID(0x0763, 0x2003))
return audiophile_skip_setting_quirk(chip, iface, altno);
+ if (chip->usb_id == USB_ID(0x0dba, 0x3000))
+ return mbox2_skip_setting_quirk(chip, iface, altno);
+
return 0;
}
@@ -506,6 +510,10 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
if (id == USB_ID(0x0d8c, 0x0102))
return snd_usb_cm6206_boot_quirk(dev);
+ /* Digidesign Mbox 2 */
+ if (id == USB_ID(0x0dba, 0x3000))
+ return snd_usb_mbox2_boot_quirk(dev);
+
/* Access Music VirusTI Desktop */
if (id == USB_ID(0x133e, 0x0815))
return snd_usb_accessmusic_boot_quirk(dev);
@@ -527,6 +535,9 @@ int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat
if (chip->setup == 0x00 ||
fp->altsetting==1 || fp->altsetting==2 || fp->altsetting==3)
return 1;
+ break;
+ case USB_ID(0x0dba, 0x3000): /* Digidesign Mbox 2 */
+ return 1;
}
return 0;
}
@@ -594,3 +605,117 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
}
}
+#define MBOX2_FIRMWARE_SIZE 646
+#define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */
+#define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */
+
+static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
+{
+ struct usb_host_config *config = dev->actconfig;
+ int err;
+ u8 enablemagic[3];
+ u8 bootresponse;
+ u8 temp[12];
+ int fwsize;
+
+ if ((fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength)) == MBOX2_FIRMWARE_SIZE) {
+ snd_printdd("Sending Digidesign Mbox 2 boot sequence...\n");
+
+ /* From USB Snoop,
+ *
+ * SetupPacket = RT RQ VHVL INDX SIZE
+ * RT = 0xRT Request Type
+ * RQ = 0xRQ Request
+ * VHVL = 0xVLVH Value in reverse byte order
+ * INDX = 0xDXIN Index in reverse byte order
+ * SIZE = 0xZESI Size in reverse byte order
+ *
+ * Magic boot code setup packet: c0 85 01 00 00 00 12 00
+ * RQ RT VLVH DXIN ZESI
+ * becomes 0x85, 0xc0, 0x0001, 0x0000, &RETURNDATA, 0x0012, TIMEOUT
+ * for snd_usb_ctl_msg()
+ */
+
+mbox2_reboot:
+ snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
+ 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012, 1000);
+
+ if (bootresponse == MBOX2_BOOT_LOADING) {
+ snd_printdd("device not ready, resending boot sequence...\n");
+ goto mbox2_reboot;
+ }
+
+ if (bootresponse == MBOX2_BOOT_READY) {
+ snd_printdd("device initialised!\n");
+
+ err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
+ &dev->descriptor, sizeof(dev->descriptor));
+ config = dev->actconfig;
+ if (err < 0) snd_printdd("error usb_get_descriptor: %d\n", err);
+ err = usb_reset_configuration(dev);
+ if (err < 0) snd_printdd("error usb_reset_configuration: %d\n", err);
+ snd_printdd("mbox2_boot: new boot length = %d\n",
+ le16_to_cpu(get_cfg_desc(config)->wTotalLength));
+
+ /* We want 48 kHz mode for now */
+ enablemagic[0]=0x80;
+ enablemagic[1]=0xbb;
+ enablemagic[2]=0x00;
+
+ /* Send the magic! */
+ snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
+ 0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003, 1000);
+
+ snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x81, 0xa2, 0x0100, 0x0085, &enablemagic, 0x0003, 1000);
+
+ snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x81, 0xa2, 0x0100, 0x0086, &enablemagic, 0x0003, 1000);
+
+ snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x81, 0xa2, 0x0100, 0x0003, &enablemagic, 0x0003, 1000);
+
+ snd_printk(KERN_INFO "Digidesign Mbox 2: 24 Bit 48kHz Analogue");
+
+ return 0; /* Succesful boot */
+ }
+
+ snd_printdd("unknown bootresponse, ignoring device: %d\n",bootresponse);
+ return -ENODEV;
+ }
+ snd_printk("Invalid firmware size: %d\n",fwsize);
+ return -ENODEV;
+}
+
+static int mbox2_skip_setting_quirk(struct snd_usb_audio *chip,
+ int iface, int altno)
+{
+ u8 srate[3];
+ u8 temp[12];
+
+ /* Reset ifaces 2,4,5 to 0 altsetting. */
+ usb_set_interface(chip->dev, iface, 0);
+
+ //setup 48k
+ srate[0]=0x80;
+ srate[1]=0xbb;
+ srate[2]=0x00;
+
+ /* Send the magic! */
+ snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0),
+ 0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003, 1000);
+
+ snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0),
+ 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003, 1000);
+
+ snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0),
+ 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003, 1000);
+
+ snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0),
+ 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003, 1000);
+
+ if (altno != 3) return 1;
+
+ return 0;
+}
+
diff --git a/sound/usb/quirks.h b/sound/usb/quirks.h
index 03e5e94..13fd3ad 100644
--- a/sound/usb/quirks.h
+++ b/sound/usb/quirks.h
@@ -20,4 +20,9 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
int snd_usb_is_big_endian_format(struct snd_usb_audio *chip,
struct audioformat *fp);
+static int mbox2_skip_setting_quirk(struct snd_usb_audio *chip,
+ int iface, int altno);
+
+static int snd_usb_mbox2_boot_quirk(struct usb_device *dev);
+
#endif /* __USBAUDIO_QUIRKS_H */
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index db3eb21..128c3f4 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -70,6 +70,7 @@ enum quirk_type {
QUIRK_MIDI_YAMAHA,
QUIRK_MIDI_MIDIMAN,
QUIRK_MIDI_NOVATION,
+ QUIRK_MIDI_MBOX2,
QUIRK_MIDI_RAW_BYTES,
QUIRK_MIDI_EMAGIC,
QUIRK_MIDI_CME,
--
1.6.3.3
More information about the Alsa-devel
mailing list