[alsa-devel] [PATCH v3] ASoC: Add Freescale SGTL5000 codec support
zhaoming.zeng at freescale.com
zhaoming.zeng at freescale.com
Tue Feb 15 23:56:16 CET 2011
From: Zeng Zhaoming <zhaoming.zeng at freescale.com>
Add Freescale SGTL5000 codec support
Signed-off-by: Zeng Zhaoming <zhaoming.zeng at freescale.com>
---
changes since v2:
1. clean up register default values
2. rewrite codec power up code, add sgtl5000_set_power_regs()
3. rewrite codec clock configure code sgtl5000_set_clock()
4. reimplement PM hooks, restore register by particular order.
5. clean up dapm code, remove dac and adc event hooks.
6. clean up codec private structure, remove unnecessary fields.
7. add comments for uncommon code.
Thanks for Mark's review.
---
sound/soc/codecs/Kconfig | 4 +
sound/soc/codecs/Makefile | 1 +
sound/soc/codecs/sgtl5000.c | 1229 +++++++++++++++++++++++++++++++++++++++++++
sound/soc/codecs/sgtl5000.h | 403 ++++++++++++++
4 files changed, 1637 insertions(+), 0 deletions(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index c48b23c..57b909a 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -32,6 +32,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_MAX98088 if I2C
select SND_SOC_MAX9877 if I2C
select SND_SOC_PCM3008
+ select SND_SOC_SGTL5000 if I2C
select SND_SOC_SPDIF
select SND_SOC_SSM2602 if I2C
select SND_SOC_STAC9766 if SND_SOC_AC97_BUS
@@ -176,6 +177,9 @@ config SND_SOC_MAX98088
config SND_SOC_PCM3008
tristate
+config SND_SOC_SGTL5000
+ tristate
+
config SND_SOC_SPDIF
tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 579af9c..78e36cc 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -18,6 +18,7 @@ snd-soc-dmic-objs := dmic.o
snd-soc-l3-objs := l3.o
snd-soc-max98088-objs := max98088.o
snd-soc-pcm3008-objs := pcm3008.o
+snd-soc-sgtl5000-objs := sgtl5000.o
snd-soc-alc5623-objs := alc5623.o
snd-soc-spdif-objs := spdif_transciever.o
snd-soc-ssm2602-objs := ssm2602.o
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
new file mode 100644
index 0000000..2646ecb
--- /dev/null
+++ b/sound/soc/codecs/sgtl5000.c
@@ -0,0 +1,1229 @@
+/*
+ * sgtl5000.c -- SGTL5000 ALSA SoC Audio driver
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <sound/core.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <mach/hardware.h>
+
+#include "sgtl5000.h"
+
+#define SGTL5000_DAP_REG_OFFSET 0x0100
+#define SGTL5000_MAX_REG_OFFSET 0x013A
+
+/* default value of sgtl5000 registers except DAP */
+static const u16 sgtl5000_regs[SGTL5000_MAX_REG_OFFSET >> 1] = {
+ 0xa011, /* 0x0000, CHIP_ID. 11 stand for revison 17 */
+ 0x0000, /* 0x0002, CHIP_DIG_POWER. */
+ 0x0008, /* 0x0004, CHIP_CKL_CTRL */
+ 0x0010, /* 0x0006, CHIP_I2S_CTRL */
+ 0x0000, /* 0x0008, reserved */
+ 0x0008, /* 0x000A, CHIP_SSS_CTRL */
+ 0x0000, /* 0x000C, reserved */
+ 0x020c, /* 0x000E, CHIP_ADCDAC_CTRL */
+ 0x3c3c, /* 0x0010, CHIP_DAC_VOL */
+ 0x0000, /* 0x0012, reserved */
+ 0x015f, /* 0x0014, CHIP_PAD_STRENGTH */
+ 0x0000, /* 0x0016, reserved */
+ 0x0000, /* 0x0018, reserved */
+ 0x0000, /* 0x001A, reserved */
+ 0x0000, /* 0x001E, reserved */
+ 0x0000, /* 0x0020, CHIP_ANA_ADC_CTRL */
+ 0x1818, /* 0x0022, CHIP_ANA_HP_CTRL */
+ 0x0111, /* 0x0024, CHIP_ANN_CTRL */
+ 0x0000, /* 0x0026, CHIP_LINREG_CTRL */
+ 0x0000, /* 0x0028, CHIP_REF_CTRL */
+ 0x0000, /* 0x002A, CHIP_MIC_CTRL */
+ 0x0000, /* 0x002C, CHIP_LINE_OUT_CTRL */
+ 0x0404, /* 0x002E, CHIP_LINE_OUT_VOL */
+ 0x7060, /* 0x0030, CHIP_ANA_POWER */
+ 0x5000, /* 0x0032, CHIP_PLL_CTRL */
+ 0x0000, /* 0x0034, CHIP_CLK_TOP_CTRL */
+ 0x0000, /* 0x0036, CHIP_ANA_STATUS */
+ 0x0000, /* 0x0038, reserved */
+ 0x0000, /* 0x003A, CHIP_ANA_TEST2 */
+ 0x0000, /* 0x003C, CHIP_SHORT_CTRL */
+ 0x0000, /* reserved */
+};
+
+/* default value of dap registers */
+static const u16 sgtl5000_dap_regs[] = {
+ 0x0000, /* 0x0100, DAP_CONTROL */
+ 0x0000, /* 0x0102, DAP_PEQ */
+ 0x0040, /* 0x0104, DAP_BASS_ENHANCE */
+ 0x051f, /* 0x0106, DAP_BASS_ENHANCE_CTRL */
+ 0x0000, /* 0x0108, DAP_AUDIO_EQ */
+ 0x0040, /* 0x010A, DAP_SGTL_SURROUND */
+ 0x0000, /* 0x010C, DAP_FILTER_COEF_ACCESS */
+ 0x0000, /* 0x010E, DAP_COEF_WR_B0_MSB */
+ 0x0000, /* 0x0110, DAP_COEF_WR_B0_LSB */
+ 0x0000, /* 0x0112, reserved */
+ 0x0000, /* 0x0114, reserved */
+ 0x002f, /* 0x0116, DAP_AUDIO_EQ_BASS_BAND0 */
+ 0x002f, /* 0x0118, DAP_AUDIO_EQ_BAND0 */
+ 0x002f, /* 0x011A, DAP_AUDIO_EQ_BAND2 */
+ 0x002f, /* 0x011C, DAP_AUDIO_EQ_BAND3 */
+ 0x002f, /* 0x011E, DAP_AUDIO_EQ_TREBLE_BAND4 */
+ 0x8000, /* 0x0120, DAP_MAIN_CHAN */
+ 0x0000, /* 0x0122, DAP_MIX_CHAN */
+ 0x0510, /* 0x0124, DAP_AVC_CTRL */
+ 0x1473, /* 0x0126, DAP_AVC_THRESHOLD */
+ 0x0028, /* 0x0128, DAP_AVC_ATTACK */
+ 0x0050, /* 0x012A, DAP_AVC_DECAY */
+ 0x0000, /* 0x012C, DAP_COEF_WR_B1_MSB */
+ 0x0000, /* 0x012E, DAP_COEF_WR_B1_LSB */
+ 0x0000, /* 0x0130, DAP_COEF_WR_B2_MSB */
+ 0x0000, /* 0x0132, DAP_COEF_WR_B2_LSB */
+ 0x0000, /* 0x0134, DAP_COEF_WR_A1_MSB */
+ 0x0000, /* 0x0136, DAP_COEF_WR_A1_LSB */
+ 0x0000, /* 0x0138, DAP_COEF_WR_A2_MSB */
+ 0x0000, /* 0x013A, DAP_COEF_WR_A2_LSB */
+};
+
+/* regulator supplies for sgtl5000, VDDD is an option external supply */
+enum sgtl5000_regulator_supplies {
+ VDDA,
+ VDDIO,
+ VDDD,
+ SGTL5000_SUPPLY_NUM
+};
+
+/* vddd is optinal supply */
+static const char *supply_names[SGTL5000_SUPPLY_NUM] = {
+ "VDDA",
+ "VDDIO",
+ "VDDD"
+};
+
+/* sgtl5000 private structure in codec */
+struct sgtl5000_priv {
+ int sysclk; /* sysclk rate */
+ int master; /* i2s master or not */
+ int fmt; /* i2s data format */
+ struct regulator *supplies[SGTL5000_SUPPLY_NUM]; /* all regulators. */
+};
+
+/*
+ * mic_bias power on/off share the same register bits with
+ * output impedance of mic bias, when power on mic bias, we
+ * need reclaim it to impedance value.
+ * 0x0 = Powered off
+ * 0x1 = 2Kohm
+ * 0x2 = 4Kohm
+ * 0x3 = 8Kohm
+ */
+static int mic_bias_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ /* change mic bias resistor to 4Kohm */
+ snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
+ SGTL5000_BIAS_R_4k, SGTL5000_BIAS_R_4k);
+
+ return 0;
+}
+
+/*
+ * using codec assist to small pop, hp_powerup or lineout_powerup
+ * should stay setting until vag_powerup is fully ramped down,
+ * vag fully ramped down require 400ms.
+ */
+static int small_pop_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
+ break;
+
+ case SND_SOC_DAPM_PRE_PMD:
+ snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VAG_POWERUP, 0);
+ msleep(400);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/* input sources for ADC */
+static const char *adc_mux_text[] = {
+ "MIC_IN", "LINE_IN"
+};
+
+static const struct soc_enum adc_enum =
+SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 2, 2, adc_mux_text);
+
+static const struct snd_kcontrol_new adc_mux =
+SOC_DAPM_ENUM("Capture Mux", adc_enum);
+
+/* input sources for DAC */
+static const char *dac_mux_text[] = {
+ "DAC", "LINE_IN"
+};
+
+static const struct soc_enum dac_enum =
+SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 6, 2, dac_mux_text);
+
+static const struct snd_kcontrol_new dac_mux =
+SOC_DAPM_ENUM("Headphone Mux", dac_enum);
+
+static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
+ SND_SOC_DAPM_INPUT("LINE_IN"),
+ SND_SOC_DAPM_INPUT("MIC_IN"),
+
+ SND_SOC_DAPM_OUTPUT("HP_OUT"),
+ SND_SOC_DAPM_OUTPUT("LINE_OUT"),
+
+ SND_SOC_DAPM_MICBIAS_E("Mic Bias", SGTL5000_CHIP_MIC_CTRL, 8, 0,
+ mic_bias_event, SND_SOC_DAPM_POST_PMU),
+
+ SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0,
+ small_pop_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+ SND_SOC_DAPM_PGA_E("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0,
+ small_pop_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+
+ SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
+ SND_SOC_DAPM_MUX("Headphone Mux", SND_SOC_NOPM, 0, 0, &dac_mux),
+
+ /* aif for i2s input */
+ SND_SOC_DAPM_AIF_IN("AIFIN", "Playback",
+ 0, SGTL5000_CHIP_DIG_POWER,
+ 0, 0),
+
+ /* aif for i2s output */
+ SND_SOC_DAPM_AIF_OUT("AIFOUT", "Capture",
+ 0, SGTL5000_CHIP_DIG_POWER,
+ 1, 0),
+
+ SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
+
+ SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
+};
+
+/* routes for sgtl5000 */
+static const struct snd_soc_dapm_route audio_map[] = {
+ {"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */
+ {"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */
+
+ {"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */
+ {"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */
+
+ {"DAC", NULL, "AIFIN"}, /* i2s-->dac,skip audio mux */
+ {"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */
+ {"LO", NULL, "DAC"}, /* dac --> line_out */
+
+ {"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */
+ {"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */
+
+ {"LINE_OUT", NULL, "LO"},
+ {"HP_OUT", NULL, "HP"},
+};
+
+/* custom function to fetch info of PCM playback volume */
+static int dac_info_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 2;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 0xfc - 0x3c;
+ return 0;
+}
+
+/*
+ * custom function to get of PCM playback volume
+ * PCM volume with 0.5017 dB steps from 0 to -90 dB
+ * 0x3B and less = Reserved
+ * 0x3C = 0 dB
+ * 0x3D = -0.5 dB
+ * 0xF0 = -90 dB
+ * 0xFC and greater = Muted
+ */
+static int dac_get_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ int reg, l, r;
+
+ reg = snd_soc_read(codec, SGTL5000_CHIP_DAC_VOL);
+ l = (reg & SGTL5000_DAC_VOL_LEFT_MASK) >> SGTL5000_DAC_VOL_LEFT_SHIFT;
+ r = (reg & SGTL5000_DAC_VOL_RIGHT_MASK) >> SGTL5000_DAC_VOL_RIGHT_SHIFT;
+ l = l < 0x3c ? 0x3c : l;
+ l = l > 0xfc ? 0xfc : l;
+ r = r < 0x3c ? 0x3c : r;
+ r = r > 0xfc ? 0xfc : r;
+
+ /* revert it */
+ l = 0xfc - l;
+ r = 0xfc - r;
+
+ ucontrol->value.integer.value[0] = l;
+ ucontrol->value.integer.value[1] = r;
+
+ return 0;
+}
+
+/*
+ * custom put function for PCM playback volume
+ * PCM volume with 0.5017 dB steps from 0 to -90 dB
+ * 0x3B and less = Reserved
+ * 0x3C = 0 dB
+ * 0x3D = -0.5 dB
+ * 0xF0 = -90 dB
+ * 0xFC and greater = Muted
+ */
+static int dac_put_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ int reg, l, r;
+
+ l = ucontrol->value.integer.value[0];
+ r = ucontrol->value.integer.value[1];
+
+ l = l < 0 ? 0 : l;
+ l = l > 0xfc - 0x3c ? 0xfc - 0x3c : l;
+ r = r < 0 ? 0 : r;
+ r = r > 0xfc - 0x3c ? 0xfc - 0x3c : r;
+ l = 0xfc - l;
+ r = 0xfc - r;
+
+ reg = l << SGTL5000_DAC_VOL_LEFT_SHIFT |
+ r << SGTL5000_DAC_VOL_RIGHT_SHIFT;
+
+ snd_soc_update_bits_locked(codec, SGTL5000_CHIP_DAC_VOL, reg, reg);
+
+ return 0;
+}
+
+/* need SOC_DOUBLE_S8_TLV with invert */
+#define SGTL5000_PCM_PLAYBACK_CONTROL \
+ { \
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = "PCM Playback Volume", \
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+ SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+ .info = dac_info_volsw, \
+ .get = dac_get_volsw, \
+ .put = dac_put_volsw, \
+ }
+
+/* tlv for mic gain, 0db 20db 30db 40db */
+static const unsigned int mic_gain_tlv[] = {
+ TLV_DB_RANGE_HEAD(4),
+ 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
+ 1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0),
+};
+
+/* tlv for hp volume, -51.5db to 12.0db, step .5db */
+static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0);
+
+static const struct snd_kcontrol_new sgtl5000_snd_controls[] = {
+ SGTL5000_PCM_PLAYBACK_CONTROL,
+
+ SOC_DOUBLE("Capture Volume", SGTL5000_CHIP_ANA_ADC_CTRL, 0, 4, 0xf, 0),
+ SOC_SINGLE("Capture Attenuate Switch (-6db)",
+ SGTL5000_CHIP_ANA_ADC_CTRL,
+ 8, 1, 0),
+ SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0),
+
+ SOC_DOUBLE_TLV("Headphone Playback Volume",
+ SGTL5000_CHIP_ANA_HP_CTRL,
+ 0, 8,
+ 0x7f, 1,
+ headphone_volume),
+ SOC_SINGLE("Headphone Playback ZC Switch", SGTL5000_CHIP_ANA_CTRL,
+ 5, 1, 0),
+
+ SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL,
+ 0, 4, 0, mic_gain_tlv),
+};
+
+/* mute the codec used by alsa core */
+static int sgtl5000_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+
+ u16 adcdac_ctrl = SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT;
+
+ if (mute)
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ADCDAC_CTRL,
+ adcdac_ctrl, adcdac_ctrl);
+ else
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ADCDAC_CTRL,
+ adcdac_ctrl, 0);
+
+ return 0;
+}
+
+/* set codec format */
+static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ u16 i2sctl = 0;
+
+ sgtl5000->master = 0;
+ /*
+ * i2s clock and frame master setting.
+ * ONLY support:
+ * - clock and frame slave,
+ * - clock and frame master
+ */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ i2sctl |= SGTL5000_I2S_MASTER;
+ sgtl5000->master = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* setting i2s data format */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ i2sctl |= SGTL5000_I2S_MODE_PCM;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ i2sctl |= SGTL5000_I2S_MODE_PCM;
+ i2sctl |= SGTL5000_I2S_LRALIGN;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ i2sctl |= SGTL5000_I2S_MODE_I2S_LJ;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ i2sctl |= SGTL5000_I2S_MODE_RJ;
+ i2sctl |= SGTL5000_I2S_LRPOL;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ i2sctl |= SGTL5000_I2S_MODE_I2S_LJ;
+ i2sctl |= SGTL5000_I2S_LRALIGN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ sgtl5000->fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+
+ /* Clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ i2sctl |= SGTL5000_I2S_SCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_write(codec, SGTL5000_CHIP_I2S_CTRL, i2sctl);
+
+ return 0;
+}
+
+/* set codec sysclk */
+static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ switch (clk_id) {
+ case SGTL5000_SYSCLK:
+ sgtl5000->sysclk = freq;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * set clock according to i2s frame clock,
+ * sgtl5000 provide 2 clock sources.
+ * 1. sys_mclk. sample freq can only configure to
+ * 1/256, 1/384, 1/512 of sys_mclk.
+ * 2. pll. can derive any audio clocks.
+ *
+ * clock setting rules:
+ * 1. in slave mode, only sys_mclk can use.
+ * 2. as constraint by sys_mclk, sample freq should
+ * set to 32k, 44.1k and above.
+ * 3. using sys_mclk prefer to pll to save power.
+ */
+static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
+{
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ int clk_ctl = 0;
+ int sys_fs; /* sample freq */
+
+ /*
+ * sample freq should be divided by frame clock,
+ * if frame clock lower than 44.1khz, sample feq should set to
+ * 32khz or 44.1khz.
+ */
+ switch (frame_rate) {
+ case 8000:
+ case 16000:
+ sys_fs = 32000;
+ break;
+ case 11025:
+ case 22050:
+ sys_fs = 44100;
+ break;
+ default:
+ sys_fs = frame_rate;
+ break;
+ }
+
+ /* set devided factor of frame clock */
+ switch (sys_fs / frame_rate) {
+ case 4:
+ clk_ctl |= SGTL5000_RATE_MODE_DIV_4 << SGTL5000_RATE_MODE_SHIFT;
+ break;
+ case 2:
+ clk_ctl |= SGTL5000_RATE_MODE_DIV_2 << SGTL5000_RATE_MODE_SHIFT;
+ break;
+ /*
+ * this implict case 1:
+ * because default: sys_fs = lrclk;
+ */
+ default:
+ clk_ctl |= SGTL5000_RATE_MODE_DIV_1 << SGTL5000_RATE_MODE_SHIFT;
+ break;
+ }
+
+ /* set the sys_fs accroding to frame rate */
+ switch (sys_fs) {
+ case 32000:
+ clk_ctl |= SGTL5000_SYS_FS_32k << SGTL5000_SYS_FS_SHIFT;
+ break;
+ case 44100:
+ clk_ctl |= SGTL5000_SYS_FS_44_1k << SGTL5000_SYS_FS_SHIFT;
+ break;
+ case 48000:
+ clk_ctl |= SGTL5000_SYS_FS_48k << SGTL5000_SYS_FS_SHIFT;
+ break;
+ case 96000:
+ clk_ctl |= SGTL5000_SYS_FS_96k << SGTL5000_SYS_FS_SHIFT;
+ break;
+ default:
+ dev_err(codec->dev, "frame rate %d not supported\n",
+ frame_rate);
+ return -EINVAL;
+ }
+
+ /*
+ * calculate the divider of mclk/sample_freq,
+ * factor of freq =96k can only be 256, since mclk in range (12m,27m)
+ */
+ if (sys_fs * 256 == sgtl5000->sysclk)
+ clk_ctl |= SGTL5000_MCLK_FREQ_256FS <<
+ SGTL5000_MCLK_FREQ_SHIFT;
+ else if (sys_fs * 384 == sgtl5000->sysclk)
+ clk_ctl |= SGTL5000_MCLK_FREQ_384FS <<
+ SGTL5000_MCLK_FREQ_SHIFT;
+ else if (sys_fs * 512 == sgtl5000->sysclk)
+ clk_ctl |= SGTL5000_MCLK_FREQ_512FS <<
+ SGTL5000_MCLK_FREQ_SHIFT;
+ else {
+ /* if mclk not satisify the divider, using pll */
+ if (sgtl5000->master)
+ clk_ctl |= SGTL5000_MCLK_FREQ_PLL <<
+ SGTL5000_MCLK_FREQ_SHIFT;
+ else {
+ pr_err("%s: PLL not supported in slave mode\n",
+ __func__);
+ return -EINVAL;
+ }
+ }
+
+ /* if using pll, please check manual 6.4.2 for detail */
+ if ((clk_ctl & SGTL5000_MCLK_FREQ_MASK) == SGTL5000_MCLK_FREQ_PLL) {
+ u64 out, t;
+ int div2;
+ int pll_ctl;
+ unsigned int in, int_div, frac_div;
+
+ if (sgtl5000->sysclk > 17000000) {
+ div2 = 1;
+ in = sgtl5000->sysclk / 2;
+ } else {
+ div2 = 0;
+ in = sgtl5000->sysclk;
+ }
+ if (sys_fs == 44100)
+ out = 180633600;
+ else
+ out = 196608000;
+ t = do_div(out, in);
+ int_div = out;
+ t *= 2048;
+ do_div(t, in);
+ frac_div = t;
+ pll_ctl = int_div << SGTL5000_PLL_INT_DIV_SHIFT |
+ frac_div << SGTL5000_PLL_FRAC_DIV_SHIFT;
+
+ snd_soc_write(codec, SGTL5000_CHIP_PLL_CTRL, pll_ctl);
+ if (div2)
+ snd_soc_update_bits(codec,
+ SGTL5000_CHIP_CLK_TOP_CTRL,
+ SGTL5000_INPUT_FREQ_DIV2,
+ SGTL5000_INPUT_FREQ_DIV2);
+ else
+ snd_soc_update_bits(codec,
+ SGTL5000_CHIP_CLK_TOP_CTRL,
+ SGTL5000_INPUT_FREQ_DIV2,
+ 0);
+
+ /* power up pll */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
+ SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP);
+ } else
+ /* power down pll */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
+ 0);
+
+ /* if using pll, clk_ctrl must be set after pll power up */
+ snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
+
+ return 0;
+}
+
+/*
+ * Set PCM DAI bit size and sample rate.
+ * input: params_rate, params_fmt
+ */
+static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_codec *codec = rtd->codec;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ int channels = params_channels(params);
+ int i2s_ctl = 0;
+ int stereo;
+ int ret;
+
+ /* sysclk should already set */
+ if (!sgtl5000->sysclk) {
+ dev_err(codec->dev, "%s: set sysclk first!\n", __func__);
+ return -EFAULT;
+ }
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ stereo = SGTL5000_DAC_STEREO;
+ else
+ stereo = SGTL5000_ADC_STEREO;
+
+ /* set mono to save power */
+ if (channels == 1)
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, stereo, 0);
+ else
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ stereo, stereo);
+
+ /* set codec clock base on lrclk */
+ ret = sgtl5000_set_clock(codec, params_rate(params));
+ if (ret)
+ return ret;
+
+ /* set i2s data format */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
+ return -EINVAL;
+ i2s_ctl |= SGTL5000_I2S_DLEN_16 << SGTL5000_I2S_DLEN_SHIFT;
+ i2s_ctl |= SGTL5000_I2S_SCLKFREQ_32FS <<
+ SGTL5000_I2S_SCLKFREQ_SHIFT;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ i2s_ctl |= SGTL5000_I2S_DLEN_20 << SGTL5000_I2S_DLEN_SHIFT;
+ i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+ SGTL5000_I2S_SCLKFREQ_SHIFT;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ i2s_ctl |= SGTL5000_I2S_DLEN_24 << SGTL5000_I2S_DLEN_SHIFT;
+ i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+ SGTL5000_I2S_SCLKFREQ_SHIFT;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
+ return -EINVAL;
+ i2s_ctl |= SGTL5000_I2S_DLEN_32 << SGTL5000_I2S_DLEN_SHIFT;
+ i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
+ SGTL5000_I2S_SCLKFREQ_SHIFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL, i2s_ctl, i2s_ctl);
+
+ return 0;
+}
+
+/*
+ * set dac bias
+ * common state changes:
+ * startup:
+ * off --> standby --> prepare --> on
+ * standby --> prepare --> on
+ *
+ * stop:
+ * on --> prepare --> standby
+ */
+static int sgtl5000_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ int i;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ break;
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ for (i = 0; i < SGTL5000_SUPPLY_NUM; i++) {
+ if (!sgtl5000->supplies[i])
+ continue;
+ regulator_enable(sgtl5000->supplies[i]);
+ }
+ }
+ break;
+ case SND_SOC_BIAS_OFF:
+ for (i = 0; i < SGTL5000_SUPPLY_NUM; i++) {
+ if (!sgtl5000->supplies[i])
+ continue;
+ regulator_disable(sgtl5000->supplies[i]);
+ }
+ break;
+ }
+
+ codec->bias_level = level;
+ return 0;
+}
+
+#define SGTL5000_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE |\
+ SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai_ops sgtl5000_ops = {
+ .hw_params = sgtl5000_pcm_hw_params,
+ .digital_mute = sgtl5000_digital_mute,
+ .set_fmt = sgtl5000_set_dai_fmt,
+ .set_sysclk = sgtl5000_set_dai_sysclk,
+};
+
+static struct snd_soc_dai_driver sgtl5000_dai = {
+ .name = "sgtl5000",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ /*
+ * only support 8~48K + 96K,
+ * TODO modify hw_param to support more
+ */
+ .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
+ .formats = SGTL5000_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
+ .formats = SGTL5000_FORMATS,
+ },
+ .ops = &sgtl5000_ops,
+ .symmetric_rates = 1,
+};
+
+static int sgtl5000_volatile_register(unsigned int reg)
+{
+ switch (reg) {
+ case SGTL5000_CHIP_ID:
+ case SGTL5000_CHIP_ADCDAC_CTRL:
+ case SGTL5000_CHIP_ANA_STATUS:
+ return 1;
+ }
+
+ return 0;
+}
+
+static int sgtl5000_suspend(struct snd_soc_codec *codec, pm_message_t state)
+{
+ sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ return 0;
+}
+
+/*
+ * restore all sgtl5000 registers,
+ * since a big hole between dap and regular registers,
+ * we will restore them respectively.
+ */
+static int sgtl5000_restore_regs(struct snd_soc_codec *codec)
+{
+ u16 *cache = codec->reg_cache;
+ int i;
+ int regular_regs = SGTL5000_CHIP_SHORT_CTRL >> 1;
+
+ /* restore regular registers */
+ for (i = 0; i < regular_regs; i++) {
+ int reg = i << 1;
+
+ /* this regs depends on the others */
+ if (reg == SGTL5000_CHIP_ANA_POWER ||
+ reg == SGTL5000_CHIP_CLK_CTRL ||
+ reg == SGTL5000_CHIP_LINREG_CTRL ||
+ reg == SGTL5000_CHIP_LINE_OUT_CTRL ||
+ reg == SGTL5000_CHIP_CLK_CTRL)
+ continue;
+
+ snd_soc_write(codec, reg, cache[i]);
+ }
+
+ /* restore dap registers */
+ for (i = SGTL5000_DAP_REG_OFFSET >> 1;
+ i < SGTL5000_MAX_REG_OFFSET >> 1; i++) {
+ int reg = i << 1;
+
+ snd_soc_write(codec, reg, cache[i]);
+ }
+
+ /*
+ * restore power and other regs accroding
+ * to set_power() and set_clock()
+ */
+ snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL,
+ cache[SGTL5000_CHIP_LINREG_CTRL >> 1]);
+
+ snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER,
+ cache[SGTL5000_CHIP_ANA_POWER >> 1]);
+ mdelay(1);
+
+ snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL,
+ cache[SGTL5000_CHIP_CLK_CTRL >> 1]);
+
+ snd_soc_write(codec, SGTL5000_CHIP_REF_CTRL,
+ cache[SGTL5000_CHIP_REF_CTRL >> 1]);
+
+ snd_soc_write(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
+ cache[SGTL5000_CHIP_LINE_OUT_CTRL >> 1]);
+ return 0;
+}
+
+static int sgtl5000_resume(struct snd_soc_codec *codec)
+{
+ /* Bring the codec back up to standby to enable regulators */
+ sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ /* Restore registers by cached in memory */
+ sgtl5000_restore_regs(codec);
+ return 0;
+}
+
+/*
+ * sgtl5000 has 3 internal power supplies:
+ * 1. VAG, normally set to vdda/2
+ * 2. chargepump, set to different value
+ * according to voltage of vdda and vddio
+ * 3. line out VAG, normally set to vddio/2
+ *
+ * and should be set accroding to:
+ * 1. vddd provided by external or not
+ * 2. vdda and vddio voltage value. > 3.1v or not
+ * 3. chip revision >=0x11 or not. If >=0x11, not use external vddd.
+ */
+static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
+{
+ int vddd, vdda, vddio;
+ u16 ana_pwr, lreg_ctrl;
+ int vag;
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+
+ vdda = regulator_get_voltage(sgtl5000->supplies[VDDA]) / 1000;
+ vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO]) / 1000;
+
+ if (sgtl5000->supplies[VDDD])
+ vddd = regulator_get_voltage(sgtl5000->supplies[VDDD]) / 1000;
+ else
+ vddd = 0;
+
+ /* reset value */
+ ana_pwr = SGTL5000_DAC_STEREO |
+ SGTL5000_ADC_STEREO |
+ SGTL5000_REFTOP_POWERUP;
+ lreg_ctrl = 0;
+
+ /* if no external vddd, use internal vddd */
+ if (!vddd) {
+ /* set VDDD to 1.2v */
+ lreg_ctrl |= 0x8 << SGTL5000_LINREG_VDDD_SHIFT;
+ /* power up internal linear regulator */
+ ana_pwr |= SGTL5000_LINEREG_D_POWERUP |
+ SGTL5000_LINREG_SIMPLE_POWERUP |
+ SGTL5000_STARTUP_POWERUP;
+ }
+
+ if (vddio < 3100 && vdda < 3100) {
+ /* enable internal oscillator used for charge pump */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_CLK_TOP_CTRL,
+ SGTL5000_INT_OSC_EN,
+ SGTL5000_INT_OSC_EN);
+ /* Enable VDDC charge pump */
+ ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
+ } else if (vddio >= 3100 && vdda >= 3100) {
+ /*
+ * if vddio and vddd > 3.1v,
+ * charge pump should be clean before set ana_pwr
+ */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_VDDC_CHRGPMP_POWERUP, 0);
+
+ /* VDDC use VDDIO rail */
+ lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
+ lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
+ SGTL5000_VDDC_MAN_ASSN_SHIFT;
+ }
+
+ snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, ana_pwr);
+ mdelay(1);
+
+ snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
+
+ /*
+ * if vddd linear reg has been enabled,
+ * simple digital supply should be clear to get
+ * proper VDDD voltage.
+ */
+ if (ana_pwr & SGTL5000_LINEREG_D_POWERUP) {
+ ana_pwr &= ~SGTL5000_LINREG_SIMPLE_POWERUP;
+ snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
+ SGTL5000_LINREG_SIMPLE_POWERUP |
+ SGTL5000_STARTUP_POWERUP,
+ 0);
+ mdelay(1);
+ }
+
+ /*
+ * set ADC/DAC VAG to vdda / 2,
+ * should stay in range (0.8v, 1.575v)
+ */
+ vag = vdda / 2;
+ if (vag <= SGTL5000_ANA_GND_BASE)
+ vag = 0;
+ else if (vag >= SGTL5000_ANA_GND_BASE + SGTL5000_ANA_GND_STP *
+ (SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT))
+ vag = SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT;
+ else
+ vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP;
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
+ vag << SGTL5000_ANA_GND_SHIFT,
+ vag << SGTL5000_ANA_GND_SHIFT);
+
+ /* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */
+ vag = vddio / 2;
+ if (vag <= SGTL5000_LINE_OUT_GND_BASE)
+ vag = 0;
+ else if (vag >= SGTL5000_LINE_OUT_GND_BASE +
+ SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX)
+ vag = SGTL5000_LINE_OUT_GND_MAX;
+ else
+ vag = (vag - SGTL5000_LINE_OUT_GND_BASE) /
+ SGTL5000_LINE_OUT_GND_STP;
+
+ snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
+ vag << SGTL5000_LINE_OUT_GND_SHIFT |
+ SGTL5000_LINE_OUT_CURRENT_360u <<
+ SGTL5000_LINE_OUT_CURRENT_SHIFT,
+ vag << SGTL5000_LINE_OUT_GND_SHIFT |
+ SGTL5000_LINE_OUT_CURRENT_360u <<
+ SGTL5000_LINE_OUT_CURRENT_SHIFT);
+
+ return 0;
+}
+
+static int sgtl5000_probe(struct snd_soc_codec *codec)
+{
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ u16 reg;
+ int ret;
+ int rev;
+ int i;
+
+ /* setup i2c data ops */
+ ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_I2C);
+ if (ret < 0) {
+ dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+ return ret;
+ }
+
+ /* read chip information */
+ reg = snd_soc_read(codec, SGTL5000_CHIP_ID);
+ if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) !=
+ SGTL5000_PARTID_PART_ID) {
+ dev_err(codec->dev,
+ "Device with ID register %x is not a sgtl5000\n", reg);
+ ret = -ENODEV;
+ goto err_out;
+ }
+
+ rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT;
+ dev_info(codec->dev, "sgtl5000 revision %d\n", rev);
+
+ /* get and enable all regulators */
+ for (i = 0; i < SGTL5000_SUPPLY_NUM; i++) {
+ struct regulator *reg;
+
+ /* workaround for revision 0x11, using internal LDO */
+ if (i == VDDD && rev == 0x11)
+ continue;
+
+ reg = regulator_get(codec->dev, supply_names[i]);
+
+ if (IS_ERR(reg))
+ continue;
+
+ regulator_enable(reg);
+ sgtl5000->supplies[i] = reg;
+ }
+
+ /*
+ * vdda and vddio regulator must configured,
+ * vddd is an optional regulator, if vddd not supply externally,
+ * internal vddd will be enabled in sgtl5000_set_power_regs()
+ */
+ if (!sgtl5000->supplies[VDDA] || !sgtl5000->supplies[VDDIO]) {
+ dev_err(codec->dev,
+ "Not set vdda or vddio regulator correctly\n");
+
+ /* platform regulator not configured correctly */
+ ret = -ENODEV;
+ goto err_out;
+ }
+
+ /* power up sgtl5000 */
+ ret = sgtl5000_set_power_regs(codec);
+ if (ret)
+ goto err_out;
+
+ /* enable small pop, introduce 400ms delay in turning off */
+ snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
+ SGTL5000_SMALL_POP,
+ SGTL5000_SMALL_POP);
+
+ /* enable short cut detect */
+ snd_soc_write(codec, SGTL5000_CHIP_SHORT_CTRL, 0);
+
+ /*
+ * set i2s as default input of sound switch
+ * TODO: add sound switch to control and dapm widge.
+ */
+ snd_soc_write(codec, SGTL5000_CHIP_SSS_CTRL,
+ SGTL5000_DAC_SEL_I2S_IN << SGTL5000_DAC_SEL_SHIFT);
+ snd_soc_write(codec, SGTL5000_CHIP_DIG_POWER,
+ SGTL5000_ADC_EN | SGTL5000_DAC_EN);
+
+ /* enable dac vol ramp by default */
+ snd_soc_write(codec, SGTL5000_CHIP_ADCDAC_CTRL,
+ SGTL5000_DAC_VOL_RAMP_EN |
+ SGTL5000_DAC_MUTE_RIGHT |
+ SGTL5000_DAC_MUTE_LEFT);
+
+ snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, 0x015f);
+
+ /* set default volume of adc */
+ reg = snd_soc_read(codec, SGTL5000_CHIP_ANA_ADC_CTRL);
+ reg &= ~SGTL5000_ADC_VOL_M6DB;
+ reg &= ~(SGTL5000_ADC_VOL_LEFT_MASK | SGTL5000_ADC_VOL_RIGHT_MASK);
+ reg |= (0xf << SGTL5000_ADC_VOL_LEFT_SHIFT)
+ | (0xf << SGTL5000_ADC_VOL_RIGHT_SHIFT);
+ snd_soc_write(codec, SGTL5000_CHIP_ANA_ADC_CTRL, reg);
+
+ snd_soc_write(codec, SGTL5000_CHIP_ANA_CTRL,
+ SGTL5000_HP_ZCD_EN |
+ SGTL5000_ADC_ZCD_EN);
+
+ snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 0);
+
+ /*
+ * disable DAP
+ * TODO:
+ * Enable DAP in control and dapm.
+ */
+ snd_soc_write(codec, SGTL5000_DAP_CTRL, 0);
+
+ /* leading to standby state */
+ ret = sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ if (ret)
+ goto err_out;
+
+ snd_soc_add_controls(codec, sgtl5000_snd_controls,
+ ARRAY_SIZE(sgtl5000_snd_controls));
+
+ snd_soc_dapm_new_controls(codec, sgtl5000_dapm_widgets,
+ ARRAY_SIZE(sgtl5000_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ snd_soc_dapm_new_widgets(codec);
+
+ return 0;
+
+err_out:
+ for (i = 0; i < SGTL5000_SUPPLY_NUM; i++) {
+ if (!sgtl5000->supplies[i])
+ continue;
+
+ regulator_disable(sgtl5000->supplies[i]);
+ regulator_put(sgtl5000->supplies[i]);
+ }
+
+ return ret;
+}
+
+static int sgtl5000_remove(struct snd_soc_codec *codec)
+{
+ struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
+ int i;
+
+ sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ snd_soc_dapm_free(codec);
+
+ for (i = 0; i < SGTL5000_SUPPLY_NUM; i++) {
+ if (!sgtl5000->supplies[i])
+ continue;
+
+ regulator_disable(sgtl5000->supplies[i]);
+ regulator_put(sgtl5000->supplies[i]);
+ }
+
+ return 0;
+}
+
+struct snd_soc_codec_driver sgtl5000_driver = {
+ .probe = sgtl5000_probe,
+ .remove = sgtl5000_remove,
+ .suspend = sgtl5000_suspend,
+ .resume = sgtl5000_resume,
+ .set_bias_level = sgtl5000_set_bias_level,
+ .reg_cache_size = ARRAY_SIZE(sgtl5000_regs),
+ .reg_word_size = sizeof(u16),
+ .reg_cache_step = 2,
+ .reg_cache_default = sgtl5000_regs,
+ .volatile_register = sgtl5000_volatile_register,
+};
+
+static __devinit int sgtl5000_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct sgtl5000_priv *sgtl5000;
+ int ret;
+
+ sgtl5000 = kzalloc(sizeof(struct sgtl5000_priv), GFP_KERNEL);
+ if (!sgtl5000)
+ return -ENOMEM;
+
+ /*
+ * copy DAP default values to default value array.
+ * sgtl5000 register space has a big hole, merge it
+ * at init phase makes life easy.
+ * FIXME: should we drop 'const' of sgtl5000_regs?
+ */
+ memcpy((void *)(&sgtl5000_regs[0] + (SGTL5000_DAP_REG_OFFSET >> 1)),
+ sgtl5000_dap_regs,
+ 0x3a);
+
+ i2c_set_clientdata(client, sgtl5000);
+
+ ret = snd_soc_register_codec(&client->dev,
+ &sgtl5000_driver, &sgtl5000_dai, 1);
+ if (ret) {
+ dev_err(&client->dev, "Failed to register codec: %d\n", ret);
+ kfree(sgtl5000);
+ return ret;
+ }
+
+ return 0;
+}
+
+static __devexit int sgtl5000_i2c_remove(struct i2c_client *client)
+{
+ struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
+
+ snd_soc_unregister_codec(&client->dev);
+
+ kfree(sgtl5000);
+ return 0;
+}
+
+static const struct i2c_device_id sgtl5000_id[] = {
+ {"sgtl5000", 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(i2c, sgtl5000_id);
+
+static struct i2c_driver sgtl5000_i2c_driver = {
+ .driver = {
+ .name = "sgtl5000",
+ .owner = THIS_MODULE,
+ },
+ .probe = sgtl5000_i2c_probe,
+ .remove = __devexit_p(sgtl5000_i2c_remove),
+ .id_table = sgtl5000_id,
+};
+
+static int __init sgtl5000_modinit(void)
+{
+ return i2c_add_driver(&sgtl5000_i2c_driver);
+}
+module_init(sgtl5000_modinit);
+
+static void __exit sgtl5000_exit(void)
+{
+ i2c_del_driver(&sgtl5000_i2c_driver);
+}
+module_exit(sgtl5000_exit);
+
+MODULE_DESCRIPTION("ASoC sgtl5000 driver");
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
new file mode 100644
index 0000000..7f24655
--- /dev/null
+++ b/sound/soc/codecs/sgtl5000.h
@@ -0,0 +1,403 @@
+/*
+ * sgtl5000.h - SGTL5000 audio codec interface
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _SGTL5000_H
+#define _SGTL5000_H
+
+#include <linux/i2c.h>
+
+/*
+ * Register values.
+ */
+#define SGTL5000_CHIP_ID 0x0000
+#define SGTL5000_CHIP_DIG_POWER 0x0002
+#define SGTL5000_CHIP_CLK_CTRL 0x0004
+#define SGTL5000_CHIP_I2S_CTRL 0x0006
+#define SGTL5000_CHIP_SSS_CTRL 0x000a
+#define SGTL5000_CHIP_ADCDAC_CTRL 0x000e
+#define SGTL5000_CHIP_DAC_VOL 0x0010
+#define SGTL5000_CHIP_PAD_STRENGTH 0x0014
+#define SGTL5000_CHIP_ANA_ADC_CTRL 0x0020
+#define SGTL5000_CHIP_ANA_HP_CTRL 0x0022
+#define SGTL5000_CHIP_ANA_CTRL 0x0024
+#define SGTL5000_CHIP_LINREG_CTRL 0x0026
+#define SGTL5000_CHIP_REF_CTRL 0x0028
+#define SGTL5000_CHIP_MIC_CTRL 0x002a
+#define SGTL5000_CHIP_LINE_OUT_CTRL 0x002c
+#define SGTL5000_CHIP_LINE_OUT_VOL 0x002e
+#define SGTL5000_CHIP_ANA_POWER 0x0030
+#define SGTL5000_CHIP_PLL_CTRL 0x0032
+#define SGTL5000_CHIP_CLK_TOP_CTRL 0x0034
+#define SGTL5000_CHIP_ANA_STATUS 0x0036
+#define SGTL5000_CHIP_SHORT_CTRL 0x003c
+#define SGTL5000_CHIP_ANA_TEST2 0x003a
+#define SGTL5000_DAP_CTRL 0x0100
+#define SGTL5000_DAP_PEQ 0x0102
+#define SGTL5000_DAP_BASS_ENHANCE 0x0104
+#define SGTL5000_DAP_BASS_ENHANCE_CTRL 0x0106
+#define SGTL5000_DAP_AUDIO_EQ 0x0108
+#define SGTL5000_DAP_SURROUND 0x010a
+#define SGTL5000_DAP_FLT_COEF_ACCESS 0x010c
+#define SGTL5000_DAP_COEF_WR_B0_MSB 0x010e
+#define SGTL5000_DAP_COEF_WR_B0_LSB 0x0110
+#define SGTL5000_DAP_EQ_BASS_BAND0 0x0116
+#define SGTL5000_DAP_EQ_BASS_BAND1 0x0118
+#define SGTL5000_DAP_EQ_BASS_BAND2 0x011a
+#define SGTL5000_DAP_EQ_BASS_BAND3 0x011c
+#define SGTL5000_DAP_EQ_BASS_BAND4 0x011e
+#define SGTL5000_DAP_MAIN_CHAN 0x0120
+#define SGTL5000_DAP_MIX_CHAN 0x0122
+#define SGTL5000_DAP_AVC_CTRL 0x0124
+#define SGTL5000_DAP_AVC_THRESHOLD 0x0126
+#define SGTL5000_DAP_AVC_ATTACK 0x0128
+#define SGTL5000_DAP_AVC_DECAY 0x012a
+#define SGTL5000_DAP_COEF_WR_B1_MSB 0x012c
+#define SGTL5000_DAP_COEF_WR_B1_LSB 0x012e
+#define SGTL5000_DAP_COEF_WR_B2_MSB 0x0130
+#define SGTL5000_DAP_COEF_WR_B2_LSB 0x0132
+#define SGTL5000_DAP_COEF_WR_A1_MSB 0x0134
+#define SGTL5000_DAP_COEF_WR_A1_LSB 0x0136
+#define SGTL5000_DAP_COEF_WR_A2_MSB 0x0138
+#define SGTL5000_DAP_COEF_WR_A2_LSB 0x013a
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * SGTL5000_CHIP_ID
+ */
+#define SGTL5000_PARTID_MASK 0xff00
+#define SGTL5000_PARTID_SHIFT 8
+#define SGTL5000_PARTID_WIDTH 8
+#define SGTL5000_PARTID_PART_ID 0xa0
+#define SGTL5000_REVID_MASK 0x00ff
+#define SGTL5000_REVID_SHIFT 0
+#define SGTL5000_REVID_WIDTH 8
+
+/*
+ * SGTL5000_CHIP_DIG_POWER
+ */
+#define SGTL5000_ADC_EN 0x0040
+#define SGTL5000_DAC_EN 0x0020
+#define SGTL5000_DAP_POWERUP 0x0010
+#define SGTL5000_I2S_OUT_POWERUP 0x0002
+#define SGTL5000_I2S_IN_POWERUP 0x0001
+
+/*
+ * SGTL5000_CHIP_CLK_CTRL
+ */
+#define SGTL5000_RATE_MODE_MASK 0x0030
+#define SGTL5000_RATE_MODE_SHIFT 4
+#define SGTL5000_RATE_MODE_WIDTH 2
+#define SGTL5000_RATE_MODE_DIV_1 0
+#define SGTL5000_RATE_MODE_DIV_2 1
+#define SGTL5000_RATE_MODE_DIV_4 2
+#define SGTL5000_RATE_MODE_DIV_6 3
+#define SGTL5000_SYS_FS_MASK 0x000c
+#define SGTL5000_SYS_FS_SHIFT 2
+#define SGTL5000_SYS_FS_WIDTH 2
+#define SGTL5000_SYS_FS_32k 0x0
+#define SGTL5000_SYS_FS_44_1k 0x1
+#define SGTL5000_SYS_FS_48k 0x2
+#define SGTL5000_SYS_FS_96k 0x3
+#define SGTL5000_MCLK_FREQ_MASK 0x0003
+#define SGTL5000_MCLK_FREQ_SHIFT 0
+#define SGTL5000_MCLK_FREQ_WIDTH 2
+#define SGTL5000_MCLK_FREQ_256FS 0x0
+#define SGTL5000_MCLK_FREQ_384FS 0x1
+#define SGTL5000_MCLK_FREQ_512FS 0x2
+#define SGTL5000_MCLK_FREQ_PLL 0x3
+
+/*
+ * SGTL5000_CHIP_I2S_CTRL
+ */
+#define SGTL5000_I2S_SCLKFREQ_MASK 0x0100
+#define SGTL5000_I2S_SCLKFREQ_SHIFT 8
+#define SGTL5000_I2S_SCLKFREQ_WIDTH 1
+#define SGTL5000_I2S_SCLKFREQ_64FS 0x0
+#define SGTL5000_I2S_SCLKFREQ_32FS 0x1 /* Not for RJ mode */
+#define SGTL5000_I2S_MASTER 0x0080
+#define SGTL5000_I2S_SCLK_INV 0x0040
+#define SGTL5000_I2S_DLEN_MASK 0x0030
+#define SGTL5000_I2S_DLEN_SHIFT 4
+#define SGTL5000_I2S_DLEN_WIDTH 2
+#define SGTL5000_I2S_DLEN_32 0x0
+#define SGTL5000_I2S_DLEN_24 0x1
+#define SGTL5000_I2S_DLEN_20 0x2
+#define SGTL5000_I2S_DLEN_16 0x3
+#define SGTL5000_I2S_MODE_MASK 0x000c
+#define SGTL5000_I2S_MODE_SHIFT 2
+#define SGTL5000_I2S_MODE_WIDTH 2
+#define SGTL5000_I2S_MODE_I2S_LJ 0x0
+#define SGTL5000_I2S_MODE_RJ 0x1
+#define SGTL5000_I2S_MODE_PCM 0x2
+#define SGTL5000_I2S_LRALIGN 0x0002
+#define SGTL5000_I2S_LRPOL 0x0001 /* set for which mode */
+
+/*
+ * SGTL5000_CHIP_SSS_CTRL
+ */
+#define SGTL5000_DAP_MIX_LRSWAP 0x4000
+#define SGTL5000_DAP_LRSWAP 0x2000
+#define SGTL5000_DAC_LRSWAP 0x1000
+#define SGTL5000_I2S_OUT_LRSWAP 0x0400
+#define SGTL5000_DAP_MIX_SEL_MASK 0x0300
+#define SGTL5000_DAP_MIX_SEL_SHIFT 8
+#define SGTL5000_DAP_MIX_SEL_WIDTH 2
+#define SGTL5000_DAP_MIX_SEL_ADC 0x0
+#define SGTL5000_DAP_MIX_SEL_I2S_IN 0x1
+#define SGTL5000_DAP_SEL_MASK 0x00c0
+#define SGTL5000_DAP_SEL_SHIFT 6
+#define SGTL5000_DAP_SEL_WIDTH 2
+#define SGTL5000_DAP_SEL_ADC 0x0
+#define SGTL5000_DAP_SEL_I2S_IN 0x1
+#define SGTL5000_DAC_SEL_MASK 0x0030
+#define SGTL5000_DAC_SEL_SHIFT 4
+#define SGTL5000_DAC_SEL_WIDTH 2
+#define SGTL5000_DAC_SEL_ADC 0x0
+#define SGTL5000_DAC_SEL_I2S_IN 0x1
+#define SGTL5000_DAC_SEL_DAP 0x3
+#define SGTL5000_I2S_OUT_SEL_MASK 0x0003
+#define SGTL5000_I2S_OUT_SEL_SHIFT 0
+#define SGTL5000_I2S_OUT_SEL_WIDTH 2
+#define SGTL5000_I2S_OUT_SEL_ADC 0x0
+#define SGTL5000_I2S_OUT_SEL_I2S_IN 0x1
+#define SGTL5000_I2S_OUT_SEL_DAP 0x3
+
+/*
+ * SGTL5000_CHIP_ADCDAC_CTRL
+ */
+#define SGTL5000_VOL_BUSY_DAC_RIGHT 0x2000
+#define SGTL5000_VOL_BUSY_DAC_LEFT 0x1000
+#define SGTL5000_DAC_VOL_RAMP_EN 0x0200
+#define SGTL5000_DAC_VOL_RAMP_EXPO 0x0100
+#define SGTL5000_DAC_MUTE_RIGHT 0x0008
+#define SGTL5000_DAC_MUTE_LEFT 0x0004
+#define SGTL5000_ADC_HPF_FREEZE 0x0002
+#define SGTL5000_ADC_HPF_BYPASS 0x0001
+
+/*
+ * SGTL5000_CHIP_DAC_VOL
+ */
+#define SGTL5000_DAC_VOL_RIGHT_MASK 0xff00
+#define SGTL5000_DAC_VOL_RIGHT_SHIFT 8
+#define SGTL5000_DAC_VOL_RIGHT_WIDTH 8
+#define SGTL5000_DAC_VOL_LEFT_MASK 0x00ff
+#define SGTL5000_DAC_VOL_LEFT_SHIFT 0
+#define SGTL5000_DAC_VOL_LEFT_WIDTH 8
+
+/*
+ * SGTL5000_CHIP_PAD_STRENGTH
+ */
+#define SGTL5000_PAD_I2S_LRCLK_MASK 0x0300
+#define SGTL5000_PAD_I2S_LRCLK_SHIFT 8
+#define SGTL5000_PAD_I2S_LRCLK_WIDTH 2
+#define SGTL5000_PAD_I2S_SCLK_MASK 0x00c0
+#define SGTL5000_PAD_I2S_SCLK_SHIFT 6
+#define SGTL5000_PAD_I2S_SCLK_WIDTH 2
+#define SGTL5000_PAD_I2S_DOUT_MASK 0x0030
+#define SGTL5000_PAD_I2S_DOUT_SHIFT 4
+#define SGTL5000_PAD_I2S_DOUT_WIDTH 2
+#define SGTL5000_PAD_I2C_SDA_MASK 0x000c
+#define SGTL5000_PAD_I2C_SDA_SHIFT 2
+#define SGTL5000_PAD_I2C_SDA_WIDTH 2
+#define SGTL5000_PAD_I2C_SCL_MASK 0x0003
+#define SGTL5000_PAD_I2C_SCL_SHIFT 0
+#define SGTL5000_PAD_I2C_SCL_WIDTH 2
+
+/*
+ * SGTL5000_CHIP_ANA_ADC_CTRL
+ */
+#define SGTL5000_ADC_VOL_M6DB 0x0100
+#define SGTL5000_ADC_VOL_RIGHT_MASK 0x00f0
+#define SGTL5000_ADC_VOL_RIGHT_SHIFT 4
+#define SGTL5000_ADC_VOL_RIGHT_WIDTH 4
+#define SGTL5000_ADC_VOL_LEFT_MASK 0x000f
+#define SGTL5000_ADC_VOL_LEFT_SHIFT 0
+#define SGTL5000_ADC_VOL_LEFT_WIDTH 4
+
+/*
+ * SGTL5000_CHIP_ANA_HP_CTRL
+ */
+#define SGTL5000_HP_VOL_RIGHT_MASK 0x7f00
+#define SGTL5000_HP_VOL_RIGHT_SHIFT 8
+#define SGTL5000_HP_VOL_RIGHT_WIDTH 7
+#define SGTL5000_HP_VOL_LEFT_MASK 0x007f
+#define SGTL5000_HP_VOL_LEFT_SHIFT 0
+#define SGTL5000_HP_VOL_LEFT_WIDTH 7
+
+/*
+ * SGTL5000_CHIP_ANA_CTRL
+ */
+#define SGTL5000_LINE_OUT_MUTE 0x0100
+#define SGTL5000_HP_SEL_MASK 0x0040
+#define SGTL5000_HP_SEL_SHIFT 6
+#define SGTL5000_HP_SEL_WIDTH 1
+#define SGTL5000_HP_SEL_DAC 0x0
+#define SGTL5000_HP_SEL_LINE_IN 0x1
+#define SGTL5000_HP_ZCD_EN 0x0020
+#define SGTL5000_HP_MUTE 0x0010
+#define SGTL5000_ADC_SEL_MASK 0x0004
+#define SGTL5000_ADC_SEL_SHIFT 2
+#define SGTL5000_ADC_SEL_WIDTH 1
+#define SGTL5000_ADC_SEL_MIC 0x0
+#define SGTL5000_ADC_SEL_LINE_IN 0x1
+#define SGTL5000_ADC_ZCD_EN 0x0002
+#define SGTL5000_ADC_MUTE 0x0001
+
+/*
+ * SGTL5000_CHIP_LINREG_CTRL
+ */
+#define SGTL5000_VDDC_MAN_ASSN_MASK 0x0040
+#define SGTL5000_VDDC_MAN_ASSN_SHIFT 6
+#define SGTL5000_VDDC_MAN_ASSN_WIDTH 1
+#define SGTL5000_VDDC_MAN_ASSN_VDDA 0x0
+#define SGTL5000_VDDC_MAN_ASSN_VDDIO 0x1
+#define SGTL5000_VDDC_ASSN_OVRD 0x0020
+#define SGTL5000_LINREG_VDDD_MASK 0x000f
+#define SGTL5000_LINREG_VDDD_SHIFT 0
+#define SGTL5000_LINREG_VDDD_WIDTH 4
+
+/*
+ * SGTL5000_CHIP_REF_CTRL
+ */
+#define SGTL5000_ANA_GND_MASK 0x01f0
+#define SGTL5000_ANA_GND_SHIFT 4
+#define SGTL5000_ANA_GND_WIDTH 5
+#define SGTL5000_ANA_GND_BASE 800 /* mv */
+#define SGTL5000_ANA_GND_STP 25 /*mv */
+#define SGTL5000_BIAS_CTRL_MASK 0x000e
+#define SGTL5000_BIAS_CTRL_SHIFT 1
+#define SGTL5000_BIAS_CTRL_WIDTH 3
+#define SGTL5000_SMALL_POP 0x0001
+
+/*
+ * SGTL5000_CHIP_MIC_CTRL
+ */
+#define SGTL5000_BIAS_R_MASK 0x0200
+#define SGTL5000_BIAS_R_SHIFT 8
+#define SGTL5000_BIAS_R_WIDTH 2
+#define SGTL5000_BIAS_R_off 0x0
+#define SGTL5000_BIAS_R_2K 0x1
+#define SGTL5000_BIAS_R_4k 0x2
+#define SGTL5000_BIAS_R_8k 0x3
+#define SGTL5000_BIAS_VOLT_MASK 0x0070
+#define SGTL5000_BIAS_VOLT_SHIFT 4
+#define SGTL5000_BIAS_VOLT_WIDTH 3
+#define SGTL5000_MIC_GAIN_MASK 0x0003
+#define SGTL5000_MIC_GAIN_SHIFT 0
+#define SGTL5000_MIC_GAIN_WIDTH 2
+
+/*
+ * SGTL5000_CHIP_LINE_OUT_CTRL
+ */
+#define SGTL5000_LINE_OUT_CURRENT_MASK 0x0f00
+#define SGTL5000_LINE_OUT_CURRENT_SHIFT 8
+#define SGTL5000_LINE_OUT_CURRENT_WIDTH 4
+#define SGTL5000_LINE_OUT_CURRENT_180u 0x0
+#define SGTL5000_LINE_OUT_CURRENT_270u 0x1
+#define SGTL5000_LINE_OUT_CURRENT_360u 0x3
+#define SGTL5000_LINE_OUT_CURRENT_450u 0x7
+#define SGTL5000_LINE_OUT_CURRENT_540u 0xf
+#define SGTL5000_LINE_OUT_GND_MASK 0x003f
+#define SGTL5000_LINE_OUT_GND_SHIFT 0
+#define SGTL5000_LINE_OUT_GND_WIDTH 6
+#define SGTL5000_LINE_OUT_GND_BASE 800 /* mv */
+#define SGTL5000_LINE_OUT_GND_STP 25
+#define SGTL5000_LINE_OUT_GND_MAX 0x23
+
+/*
+ * SGTL5000_CHIP_LINE_OUT_VOL
+ */
+#define SGTL5000_LINE_OUT_VOL_RIGHT_MASK 0x1f00
+#define SGTL5000_LINE_OUT_VOL_RIGHT_SHIFT 8
+#define SGTL5000_LINE_OUT_VOL_RIGHT_WIDTH 5
+#define SGTL5000_LINE_OUT_VOL_LEFT_MASK 0x001f
+#define SGTL5000_LINE_OUT_VOL_LEFT_SHIFT 0
+#define SGTL5000_LINE_OUT_VOL_LEFT_WIDTH 5
+
+/*
+ * SGTL5000_CHIP_ANA_POWER
+ */
+#define SGTL5000_DAC_STEREO 0x4000
+#define SGTL5000_LINREG_SIMPLE_POWERUP 0x2000
+#define SGTL5000_STARTUP_POWERUP 0x1000
+#define SGTL5000_VDDC_CHRGPMP_POWERUP 0x0800
+#define SGTL5000_PLL_POWERUP 0x0400
+#define SGTL5000_LINEREG_D_POWERUP 0x0200
+#define SGTL5000_VCOAMP_POWERUP 0x0100
+#define SGTL5000_VAG_POWERUP 0x0080
+#define SGTL5000_ADC_STEREO 0x0040
+#define SGTL5000_REFTOP_POWERUP 0x0020
+#define SGTL5000_HP_POWERUP 0x0010
+#define SGTL5000_DAC_POWERUP 0x0008
+#define SGTL5000_CAPLESS_HP_POWERUP 0x0004
+#define SGTL5000_ADC_POWERUP 0x0002
+#define SGTL5000_LINE_OUT_POWERUP 0x0001
+
+/*
+ * SGTL5000_CHIP_PLL_CTRL
+ */
+#define SGTL5000_PLL_INT_DIV_MASK 0xf800
+#define SGTL5000_PLL_INT_DIV_SHIFT 11
+#define SGTL5000_PLL_INT_DIV_WIDTH 5
+#define SGTL5000_PLL_FRAC_DIV_MASK 0x0700
+#define SGTL5000_PLL_FRAC_DIV_SHIFT 0
+#define SGTL5000_PLL_FRAC_DIV_WIDTH 11
+
+/*
+ * SGTL5000_CHIP_CLK_TOP_CTRL
+ */
+#define SGTL5000_INT_OSC_EN 0x0800
+#define SGTL5000_INPUT_FREQ_DIV2 0x0008
+
+/*
+ * SGTL5000_CHIP_ANA_STATUS
+ */
+#define SGTL5000_HP_LRSHORT 0x0200
+#define SGTL5000_CAPLESS_SHORT 0x0100
+#define SGTL5000_PLL_LOCKED 0x0010
+
+/*
+ * SGTL5000_CHIP_SHORT_CTRL
+ */
+#define SGTL5000_LVLADJR_MASK 0x7000
+#define SGTL5000_LVLADJR_SHIFT 12
+#define SGTL5000_LVLADJR_WIDTH 3
+#define SGTL5000_LVLADJL_MASK 0x0700
+#define SGTL5000_LVLADJL_SHIFT 8
+#define SGTL5000_LVLADJL_WIDTH 3
+#define SGTL5000_LVLADJC_MASK 0x0070
+#define SGTL5000_LVLADJC_SHIFT 4
+#define SGTL5000_LVLADJC_WIDTH 3
+#define SGTL5000_LR_SHORT_MOD_MASK 0x000c
+#define SGTL5000_LR_SHORT_MOD_SHIFT 2
+#define SGTL5000_LR_SHORT_MOD_WIDTH 2
+#define SGTL5000_CM_SHORT_MOD_MASK 0x0003
+#define SGTL5000_CM_SHORT_MOD_SHIFT 0
+#define SGTL5000_CM_SHORT_MOD_WIDTH 2
+
+/*
+ *SGTL5000_CHIP_ANA_TEST2
+ */
+#define SGTL5000_MONO_DAC 0x1000
+
+/*
+ * SGTL5000_DAP_CTRL
+ */
+#define SGTL5000_DAP_MIX_EN 0x0010
+#define SGTL5000_DAP_EN 0x0001
+
+#define SGTL5000_SYSCLK 0x00
+#define SGTL5000_LRCLK 0x01
+
+#endif
--
1.7.0.4
More information about the Alsa-devel
mailing list