[alsa-devel] [PATCH 1/2] ALSA: add LaCie Firewire Speakers/Griffin FireWave surround driver
Stefan Richter
stefanr at s5r6.in-berlin.de
Mon Feb 7 15:40:25 CET 2011
On Feb 07 Clemens Ladisch wrote:
> Add a driver for two playback-only FireWire devices based on the OXFW970
> chip.
>
> v2: Better AMDTP API abstraction; fix fw_unit leak; small fixes.
> Two- and four-channel output on the FireWave is experimental.
>
> Signed-off-by: Clemens Ladisch <clemens at ladisch.de>
> ---
> drivers/firewire/core-iso.c | 1
> drivers/firewire/core.h | 3
> include/linux/firewire.h | 7
> sound/Kconfig | 2
> sound/Makefile | 2
> sound/firewire/Kconfig | 25 +
> sound/firewire/Makefile | 6
> sound/firewire/amdtp.c | 511 ++++++++++++++++++++++++++++++++
> sound/firewire/amdtp.h | 151 +++++++++
> sound/firewire/cmp.c | 316 +++++++++++++++++++
> sound/firewire/cmp.h | 40 ++
> sound/firewire/fcp.c | 223 +++++++++++++
> sound/firewire/fcp.h | 12
> sound/firewire/iso-resources.c | 224 ++++++++++++++
> sound/firewire/iso-resources.h | 39 ++
> sound/firewire/lib.c | 68 ++++
> sound/firewire/lib.h | 19 +
> sound/firewire/packets-buffer.c | 74 ++++
> sound/firewire/packets-buffer.h | 26 +
> sound/firewire/speakers.c | 484 ++++++++++++++++++++++++++++++
> 20 files changed, 2229 insertions(+), 4 deletions(-)
[...]
> --- a/drivers/firewire/core-iso.c
> +++ b/drivers/firewire/core-iso.c
> @@ -369,3 +369,4 @@ void fw_iso_resource_manage(struct fw_ca
> *channel = ret;
> }
> }
> +EXPORT_SYMBOL(fw_iso_resource_manage);
> --- a/drivers/firewire/core.h
> +++ b/drivers/firewire/core.h
> @@ -147,9 +147,6 @@ void fw_node_event(struct fw_card *card,
> /* -iso */
>
> int fw_iso_buffer_map(struct fw_iso_buffer *buffer, struct vm_area_struct *vma);
> -void fw_iso_resource_manage(struct fw_card *card, int generation,
> - u64 channels_mask, int *channel, int *bandwidth,
> - bool allocate, __be32 buffer[2]);
>
>
> /* -topology */
> --- a/include/linux/firewire.h
> +++ b/include/linux/firewire.h
> @@ -42,6 +42,10 @@
> #define CSR_BROADCAST_CHANNEL 0x234
> #define CSR_CONFIG_ROM 0x400
> #define CSR_CONFIG_ROM_END 0x800
> +#define CSR_OMPR 0x900
> +#define CSR_OPCR(i) (0x904 + (i) * 4)
> +#define CSR_IMPR 0x980
> +#define CSR_IPCR(i) (0x984 + (i) * 4)
> #define CSR_FCP_COMMAND 0xB00
> #define CSR_FCP_RESPONSE 0xD00
> #define CSR_FCP_END 0xF00
> @@ -441,5 +445,8 @@ int fw_iso_context_start(struct fw_iso_c
> int cycle, int sync, int tags);
> int fw_iso_context_stop(struct fw_iso_context *ctx);
> void fw_iso_context_destroy(struct fw_iso_context *ctx);
> +void fw_iso_resource_manage(struct fw_card *card, int generation,
> + u64 channels_mask, int *channel, int *bandwidth,
> + bool allocate, __be32 buffer[2]);
>
> #endif /* _LINUX_FIREWIRE_H */
[...]
The firewire subsystem parts of this patch and their being routed through
the ALSA development repository are fine with me. The export of
fw_iso_resource_manage is also going to be needed by
drivers/media/dvb/firewire/firedtv* eventually (maintained through the
v4l-dvb tree), but I suppose my lack of development speed with firedtv
will prevent any conflicts (which would be trivial to resolve in git
anyway). Hence,
Acked-by: Stefan Richter <stefanr at s5r6.in-berlin.de>
I am going to test this driver with LaCie FireWire Speakers and Griffin
FireWave RSN. BTW, FireWave is a 6-channel-out device which is targeted to
be used on OS X as either a stereo or a 5.1-Dolby-surround output. I heard
that the 5.1 mode is configured by a vendor-specific AV/C command. (The
FireWave was sold with an OS X driver; without this vendor driver it just
works as a stereo-out soundcard with OS X' stock driver.)
--
Stefan Richter
-=====-==-== --=- --===
http://arcgraph.de/sr/
More information about the Alsa-devel
mailing list