[alsa-devel] [PATCH] EDB93xx: Add support for CS4271 CODEC on EDB93xx boards

[H Hartley Sweeten]

On Tuesday, February 01, 2011 4:41 PM, Alexander Sverdlin wrote:
> From: Alexander Sverdlin <subaparts at yandex.ru>
> 
> Add support for CS4271 SPI-connected CODEC on EDB93xx boards.
> Major rework based on code provided by H Hartley Sweeten <hsweeten at visionengravers.com>.
> Tested on EDB9302, others (EDB9301, EDB9302A, EDB9307A, EDB0315A) should work.
>         
> Signed-off-by: Alexander Sverdlin <subaparts at yandex.ru>
> ---
>  arch/arm/mach-ep93xx/edb93xx.c |  117 ++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 117 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
> index 4b04316..f20be96 100644
> --- a/arch/arm/mach-ep93xx/edb93xx.c
> +++ b/arch/arm/mach-ep93xx/edb93xx.c
> @@ -30,12 +30,22 @@
>  #include <linux/gpio.h>
>  #include <linux/i2c.h>
>  #include <linux/i2c-gpio.h>
> +#include <linux/spi/spi.h>
> +#include <linux/delay.h>
> +#include <mach/ep93xx_spi.h>
>  
>  #include <mach/hardware.h>
>  
>  #include <asm/mach-types.h>
>  #include <asm/mach/arch.h>
>  
> +#include <sound/cs4271.h>
> +
> +#define edb93xx_has_audio() (machine_is_edb9301() ||	\
> +			     machine_is_edb9302() ||	\
> +			     machine_is_edb9302a() ||	\
> +			     machine_is_edb9307a() ||	\
> +			     machine_is_edb9315a())
>  
>  static void __init edb93xx_register_flash(void)
>  {
> @@ -93,6 +103,111 @@ static void __init edb93xx_register_i2c(void)
>  
>  
>  /*************************************************************************
> + * EDB93xx SPI peripheral handling
> + *************************************************************************/
> +static int edb93xx_cs4271_hw_setup(struct spi_device *spi)
> +{
> +	int gpio_nreset;
> +	int err;
> +
> +	if (machine_is_edb9301() || machine_is_edb9302()) {
> +		gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;

Are you planning on removing gpio_nreset and gpio_disable from struct cs4271_platform_data?
If not, you should just setup the gpio mapping in edb93xx_register_spi before you actually
register the spi_board_info.  Then this function and the following two can just do something
like the following and not worry about the if ... else if ... etc.


	struct cs4271_platform_data *cs4271 = spi->dev.platform_data;
	int err;

	err = gpio_request(cs4271->gpio_disable, spi->modalias);
	...


> +	} else if (machine_is_edb9302a() || machine_is_edb9307a()) {
> +		ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_HONIDE);

You shouldn't need this.  The ep93xx gpio core will now defaults all the ports to gpio
mode.  See commit fd015480c29deb52ae3bfaf41e888c450765edd8.

> +		gpio_nreset = EP93XX_GPIO_LINE_DD2;

Please use EP93XX_GPIO_LINE_H(2) instead.  None of the datasheets reference the "DD2"
gpio.

> +	} else if (machine_is_edb9315a()) {
> +		gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
> +	} else {
> +		return -EINVAL;
> +	}
> +
> +	err = gpio_request(gpio_nreset, spi->modalias);
> +	if (err)
> +		return err;
> +	err = gpio_request(EP93XX_GPIO_LINE_EGPIO6, spi->modalias);
> +	if (err)
> +		return err;
> +
> +	gpio_direction_output(EP93XX_GPIO_LINE_EGPIO6, 1);
> +
> +	/* Reset codec */
> +	gpio_direction_output(gpio_nreset, 0);
> +	udelay(1);
> +	gpio_set_value(gpio_nreset, 1);
> +	/* Give the codec time to wake up */
> +	udelay(1);
> +
> +	return 0;
> +}
> +
> +static void edb93xx_cs4271_hw_cleanup(struct spi_device *spi)
> +{
> +	int gpio_nreset;
> +
> +	if (machine_is_edb9301() || machine_is_edb9302())
> +		gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
> +	else if (machine_is_edb9302a() || machine_is_edb9307a())
> +		gpio_nreset = EP93XX_GPIO_LINE_DD2;
> +	else if (machine_is_edb9315a())
> +		gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
> +	else
> +		return;
> +
> +	gpio_set_value(gpio_nreset, 0);
> +	gpio_free(gpio_nreset);
> +
> +	gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, 1);
> +	gpio_free(EP93XX_GPIO_LINE_EGPIO6);
> +}
> +
> +static void edb93xx_cs4271_hw_cs_control(struct spi_device *spi, int value)
> +{
> +	gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
> +}
> +
> +static struct ep93xx_spi_chip_ops edb93xx_cs4271_hw = {
> +	.setup		= edb93xx_cs4271_hw_setup,
> +	.cleanup	= edb93xx_cs4271_hw_cleanup,
> +	.cs_control	= edb93xx_cs4271_hw_cs_control,
> +};
> +
> +static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
> +	{
> +		.modalias		= "cs4271",
> +		.controller_data	= &edb93xx_cs4271_hw,
> +		.max_speed_hz		= 6000000,
> +		.bus_num		= 0,
> +		.chip_select		= 0,
> +		.mode			= SPI_MODE_3,
> +	},
> +};
> +
> +static struct ep93xx_spi_info edb93xx_spi_info = {
> +	.num_chipselect	= ARRAY_SIZE(edb93xx_spi_board_info),
> +};
> +
> +static void __init edb93xx_register_spi(void)
> +{
> +	if (edb93xx_has_audio()) {
> +		ep93xx_register_spi(&edb93xx_spi_info,
> +				    edb93xx_spi_board_info,
> +				    ARRAY_SIZE(edb93xx_spi_board_info));
> +	}
> +}
> +
> +
> +/*************************************************************************
> + * EDB93xx I2S
> + *************************************************************************/
> +static void __init edb93xx_register_i2s(void)
> +{
> +	if (edb93xx_has_audio()) {
> +		ep93xx_register_i2s();
> +	}
> +}
> +
> +
> +/*************************************************************************
>   * EDB93xx pwm
>   *************************************************************************/
>  static void __init edb93xx_register_pwm(void)
> @@ -117,6 +232,8 @@ static void __init edb93xx_init_machine(void)
>  	edb93xx_register_flash();
>  	ep93xx_register_eth(&edb93xx_eth_data, 1);
>  	edb93xx_register_i2c();
> +	edb93xx_register_spi();
> +	edb93xx_register_i2s();
>  	edb93xx_register_pwm();
>  }
>  


Other than using struct cs4271_platform_data to hold the gpio information, this
looks better.  Now other spi devices can live on bus.

Hartley