[alsa-devel] [PATCH 19/21] ASoC: Convert wm2000 to use regmap API
Mark Brown
broonie at opensource.wolfsonmicro.com
Sat Dec 3 22:33:27 CET 2011
The driver wasn't even using the ASoC common code.
Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
---
sound/soc/codecs/wm2000.c | 75 ++++++++++++++++++--------------------------
1 files changed, 31 insertions(+), 44 deletions(-)
diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c
index 2726f66..a5f57ce 100644
--- a/sound/soc/codecs/wm2000.c
+++ b/sound/soc/codecs/wm2000.c
@@ -29,6 +29,7 @@
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
+#include <linux/regmap.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
#include <sound/core.h>
@@ -51,6 +52,7 @@ enum wm2000_anc_mode {
struct wm2000_priv {
struct i2c_client *i2c;
+ struct regmap *regmap;
enum wm2000_anc_mode anc_mode;
@@ -70,54 +72,21 @@ static struct i2c_client *wm2000_i2c;
static int wm2000_write(struct i2c_client *i2c, unsigned int reg,
unsigned int value)
{
- u8 data[3];
- int ret;
-
- data[0] = (reg >> 8) & 0xff;
- data[1] = reg & 0xff;
- data[2] = value & 0xff;
-
- dev_vdbg(&i2c->dev, "write %x = %x\n", reg, value);
-
- ret = i2c_master_send(i2c, data, 3);
- if (ret == 3)
- return 0;
- if (ret < 0)
- return ret;
- else
- return -EIO;
+ struct wm2000_priv *wm2000 = i2c_get_clientdata(i2c);
+ return regmap_write(wm2000->regmap, reg, value);
}
static unsigned int wm2000_read(struct i2c_client *i2c, unsigned int r)
{
- struct i2c_msg xfer[2];
- u8 reg[2];
- u8 data;
+ struct wm2000_priv *wm2000 = i2c_get_clientdata(i2c);
+ unsigned int val;
int ret;
- /* Write register */
- reg[0] = (r >> 8) & 0xff;
- reg[1] = r & 0xff;
- xfer[0].addr = i2c->addr;
- xfer[0].flags = 0;
- xfer[0].len = sizeof(reg);
- xfer[0].buf = ®[0];
-
- /* Read data */
- xfer[1].addr = i2c->addr;
- xfer[1].flags = I2C_M_RD;
- xfer[1].len = 1;
- xfer[1].buf = &data;
-
- ret = i2c_transfer(i2c->adapter, xfer, 2);
- if (ret != 2) {
- dev_err(&i2c->dev, "i2c_transfer() returned %d\n", ret);
- return 0;
- }
-
- dev_vdbg(&i2c->dev, "read %x from %x\n", data, r);
+ ret = regmap_read(wm2000->regmap, r, &val);
+ if (ret < 0)
+ return -1;
- return data;
+ return val;
}
static void wm2000_reset(struct wm2000_priv *wm2000)
@@ -725,6 +694,11 @@ int wm2000_add_controls(struct snd_soc_codec *codec)
}
EXPORT_SYMBOL_GPL(wm2000_add_controls);
+static const struct regmap_config wm2000_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *i2c_id)
{
@@ -747,6 +721,16 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
return -ENOMEM;
}
+ dev_set_drvdata(&i2c->dev, wm2000);
+
+ wm2000->regmap = regmap_init_i2c(i2c, &wm2000_regmap);
+ if (IS_ERR(wm2000->regmap)) {
+ ret = PTR_ERR(wm2000->regmap);
+ dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+ ret);
+ goto err;
+ }
+
/* Verify that this is a WM2000 */
reg = wm2000_read(i2c, WM2000_REG_ID1);
id = reg << 8;
@@ -756,7 +740,7 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
if (id != 0x2000) {
dev_err(&i2c->dev, "Device is not a WM2000 - ID %x\n", id);
ret = -ENODEV;
- goto err;
+ goto err_regmap;
}
reg = wm2000_read(i2c, WM2000_REG_REVISON);
@@ -775,7 +759,7 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
ret = request_firmware(&fw, filename, &i2c->dev);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to acquire ANC data: %d\n", ret);
- goto err;
+ goto err_regmap;
}
/* Pre-cook the concatenation of the register address onto the image */
@@ -795,7 +779,6 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
release_firmware(fw);
- dev_set_drvdata(&i2c->dev, wm2000);
wm2000->anc_eng_ena = 1;
wm2000->anc_active = 1;
wm2000->spk_ena = 1;
@@ -812,6 +795,8 @@ static int __devinit wm2000_i2c_probe(struct i2c_client *i2c,
err_fw:
release_firmware(fw);
+err_regmap:
+ regmap_exit(wm2000->regmap);
err:
return ret;
}
@@ -822,6 +807,8 @@ static __devexit int wm2000_i2c_remove(struct i2c_client *i2c)
wm2000_anc_transition(wm2000, ANC_OFF);
+ regmap_exit(wm2000->regmap);
+
wm2000_i2c = NULL;
return 0;
--
1.7.7.3
More information about the Alsa-devel
mailing list