[alsa-devel] [RFC v5]update broken web addresses in the kernel.
Justin P. Mattock
justinmattock at gmail.com
Tue Sep 28 09:05:26 CEST 2010
o.k... I'll make the changes to the arch patch, and combine the two, and
send it to jiri.. as for the names and signed offs is what is below fine
or do I need to change some of them?
>
> Looks good to me.
>
> Finn
>
>
> On Mon, 27 Sep 2010, Justin P. Mattock wrote:
>
>> Below is an updated patch to fix broken web addresses in the kernel.
>> Please let me know if I missed anything, and I'll go back and fix it.
>> and lastly Thanks for all the help with this...
>>
>> Signed-off-by: Justin P. Mattock<justinmattock at gmail.com>
>> Cc: Maciej W. Rozycki<macro at linux-mips.org>
>> Cc: Geert Uytterhoeven<geert at linux-m68k.org>
>> Cc: Finn Thain<fthain at telegraphics.com.au>
>> Cc: Randy Dunlap<rdunlap at xenotime.net>
>> Cc: Matt Turner<mattst88 at gmail.com>
>> Cc: Dimitry Torokhov<dmitry.torokhov at gmail.com>
>> Cc: Mike Frysinger<vapier.adi at gmail.com>
>> Acked-by: Ben Pfaff<blp at cs.stanford.edu>
>> Acked-by: Hans J. Koch<hjk at linutronix.de>
>>
>> ---
>> drivers/ata/pata_it821x.c | 4 ++--
>> drivers/atm/Kconfig | 2 +-
>> drivers/char/agp/Kconfig | 2 +-
>> drivers/char/agp/i460-agp.c | 2 +-
>> drivers/char/apm-emulation.c | 4 ++--
>> drivers/char/ipmi/ipmi_bt_sm.c | 2 +-
>> drivers/char/ipmi/ipmi_si_intf.c | 3 +--
>> drivers/char/n_r3964.c | 1 -
>> drivers/char/pcmcia/Kconfig | 4 ++--
>> drivers/char/tpm/Kconfig | 2 +-
>> drivers/char/tpm/tpm_infineon.c | 2 +-
>> drivers/edac/edac_device_sysfs.c | 2 +-
>> drivers/edac/i82443bxgx_edac.c | 2 +-
>> drivers/firmware/Kconfig | 4 ++--
>> drivers/firmware/edd.c | 2 +-
>> drivers/firmware/pcdp.h | 4 ++--
>> drivers/gpu/drm/drm_modes.c | 2 +-
>> drivers/hwmon/adm1025.c | 2 +-
>> drivers/hwmon/adm1026.c | 2 +-
>> drivers/hwmon/f75375s.c | 4 ++--
>> drivers/hwmon/g760a.c | 2 +-
>> drivers/hwmon/hwmon-vid.c | 2 +-
>> drivers/ide/hpt366.c | 2 +-
>> drivers/ide/ht6560b.c | 1 -
>> drivers/infiniband/Kconfig | 4 ++--
>> drivers/infiniband/hw/cxgb3/Kconfig | 2 +-
>> drivers/infiniband/hw/cxgb4/Kconfig | 2 +-
>> drivers/infiniband/ulp/iser/Kconfig | 2 +-
>> drivers/input/joystick/gamecon.c | 3 +--
>> drivers/input/misc/cm109.c | 2 +-
>> drivers/input/mouse/Kconfig | 1 +
>> drivers/input/mouse/touchkit_ps2.c | 4 ++--
>> drivers/input/touchscreen/mk712.c | 2 +-
>> drivers/isdn/i4l/isdn_audio.c | 2 +-
>> drivers/macintosh/therm_adt746x.c | 6 +++---
>> drivers/media/IR/keymaps/rc-manli.c | 1 -
>> drivers/media/dvb/ttpci/av7110.c | 10 ++--------
>> drivers/media/dvb/ttpci/av7110_av.c | 2 +-
>> drivers/media/dvb/ttpci/av7110_ca.c | 2 +-
>> drivers/media/dvb/ttpci/av7110_hw.c | 2 +-
>> drivers/media/dvb/ttpci/av7110_v4l.c | 2 +-
>> drivers/media/dvb/ttpci/budget-av.c | 2 +-
>> drivers/media/dvb/ttpci/budget-ci.c | 2 +-
>> drivers/media/dvb/ttpci/budget-core.c | 2 +-
>> drivers/media/dvb/ttpci/budget-patch.c | 2 +-
>> drivers/media/dvb/ttpci/budget.c | 2 +-
>> drivers/media/radio/radio-maxiradio.c | 2 +-
>> drivers/media/radio/radio-typhoon.c | 2 --
>> drivers/media/video/Kconfig | 2 +-
>> drivers/media/video/cafe_ccic.c | 2 +-
>> drivers/media/video/cx18/cx18-cards.c | 2 +-
>> drivers/media/video/cx23885/cx23885-417.c | 2 +-
>> drivers/media/video/cx88/cx88-blackbird.c | 2 +-
>> drivers/media/video/ivtv/ivtv-cards.c | 2 +-
>> drivers/media/video/mxb.c | 2 +-
>> drivers/media/video/sn9c102/sn9c102_pas202bcb.c | 1 -
>> drivers/misc/Kconfig | 4 ++--
>> drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++--
>> drivers/mtd/devices/lart.c | 2 +-
>> drivers/mtd/ftl.c | 2 +-
>> drivers/mtd/maps/Kconfig | 4 ++--
>> drivers/mtd/nand/cafe_nand.c | 2 +-
>> drivers/net/Kconfig | 21 ++++++++++-----------
>> drivers/net/appletalk/Kconfig | 2 +-
>> drivers/net/atp.c | 2 +-
>> drivers/net/epic100.c | 4 ++--
>> drivers/net/hamradio/Kconfig | 2 +-
>> drivers/net/ibmlana.c | 2 +-
>> drivers/net/irda/donauboe.h | 2 +-
>> drivers/net/pci-skeleton.c | 2 +-
>> drivers/net/pcmcia/3c574_cs.c | 2 +-
>> drivers/net/sc92031.c | 2 +-
>> drivers/net/tlan.c | 2 +-
>> drivers/net/tokenring/tms380tr.c | 2 +-
>> drivers/net/tulip/Kconfig | 2 +-
>> drivers/net/usb/plusb.c | 2 +-
>> drivers/net/wan/Kconfig | 2 +-
>> drivers/net/wireless/ath/ath5k/ath5k.h | 2 +-
>> drivers/net/wireless/ath/ath5k/reg.h | 1 -
>> drivers/net/wireless/p54/Kconfig | 6 +++---
>> drivers/net/wireless/prism54/islpci_hotplug.c | 2 +-
>> drivers/parisc/README.dino | 3 +--
>> drivers/pci/quirks.c | 3 ++-
>> drivers/pcmcia/yenta_socket.c | 2 +-
>> drivers/pnp/pnpbios/proc.c | 1 -
>> drivers/scsi/Kconfig | 9 +++++----
>> drivers/serial/8250.c | 2 +-
>> drivers/serial/bfin_sport_uart.c | 2 +-
>> drivers/serial/bfin_sport_uart.h | 2 +-
>> drivers/serial/uartlite.c | 2 +-
>> drivers/staging/asus_oled/README | 2 +-
>> drivers/staging/asus_oled/asus_oled.c | 2 +-
>> drivers/staging/comedi/drivers/cb_pcimdas.c | 2 +-
>> drivers/staging/comedi/drivers/daqboard2000.c | 4 ++--
>> drivers/staging/comedi/drivers/ni_labpc.c | 2 +-
>> drivers/staging/comedi/drivers/ni_mio_common.c | 2 +-
>> drivers/staging/comedi/drivers/plx9080.h | 2 +-
>> drivers/staging/comedi/drivers/rtd520.c | 2 +-
>> drivers/staging/quickstart/quickstart.c | 3 +--
>> drivers/uio/Kconfig | 6 +++---
>> drivers/usb/serial/Kconfig | 4 ++--
>> drivers/usb/serial/ftdi_sio_ids.h | 12 ++++++------
>> drivers/usb/serial/keyspan.c | 2 +-
>> drivers/usb/serial/keyspan.h | 2 +-
>> drivers/usb/serial/mct_u232.h | 9 ++++-----
>> drivers/usb/storage/Kconfig | 2 +-
>> drivers/video/Kconfig | 10 +++++-----
>> drivers/video/arcfb.c | 1 -
>> drivers/video/epson1355fb.c | 2 +-
>> drivers/video/fbcvt.c | 2 +-
>> drivers/video/hecubafb.c | 2 +-
>> drivers/video/metronomefb.c | 2 +-
>> firmware/keyspan_pda/keyspan_pda.S | 2 +-
>> firmware/keyspan_pda/xircom_pgs.S | 2 +-
>> fs/hostfs/hostfs.h | 7 +------
>> fs/partitions/ldm.c | 2 +-
>> fs/partitions/ldm.h | 2 +-
>> fs/reiserfs/Kconfig | 6 ++++--
>> fs/reiserfs/README | 2 +-
>> include/crypto/gf128mul.h | 4 ++--
>> include/linux/fdreg.h | 2 +-
>> include/linux/if_infiniband.h | 2 +-
>> include/linux/n_r3964.h | 1 -
>> net/ax25/Kconfig | 8 ++++----
>> net/ipv4/Kconfig | 4 ++--
>> net/ipv4/cipso_ipv4.c | 2 +-
>> net/ipv4/fib_trie.c | 2 +-
>> net/ipv4/netfilter/Kconfig | 2 +-
>> net/ipv4/tcp_illinois.c | 2 +-
>> net/ipv4/tcp_input.c | 4 ++--
>> net/ipv4/tcp_veno.c | 2 +-
>> net/netfilter/nf_conntrack_proto_tcp.c | 4 ++--
>> sound/oss/ac97_codec.c | 7 ++-----
>> sound/pci/ens1370.c | 2 +-
>> sound/pci/intel8x0.c | 2 +-
>> 135 files changed, 184 insertions(+), 209 deletions(-)
>>
>> diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
>> index bf88f71..aa0e0c5 100644
>> --- a/drivers/ata/pata_it821x.c
>> +++ b/drivers/ata/pata_it821x.c
>> @@ -15,8 +15,8 @@
>> * May be copied or modified under the terms of the GNU General Public License
>> * Based in part on the ITE vendor provided SCSI driver.
>> *
>> - * Documentation available from
>> - * http://www.ite.com.tw/pc/IT8212F_V04.pdf
>> + * Documentation available from IT8212F_V04.pdf
>> + * http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91
>> * Some other documents are NDA.
>> *
>> * The ITE8212 isn't exactly a standard IDE controller. It has two
>> diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
>> index be7461c..31c6010 100644
>> --- a/drivers/atm/Kconfig
>> +++ b/drivers/atm/Kconfig
>> @@ -301,7 +301,7 @@ config ATM_IA
>> control memory (128K-1KVC, 512K-4KVC), the size of the packet
>> memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3,
>> UTP155, UTP25, DS3 and E3). Go to:
>> - <http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM>
>> + <http://www.iphase.com/>
>> for more info about the cards. Say Y (or M to compile as a module
>> named iphase) here if you have one of these cards.
>>
>> diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
>> index 4b66c69..c8ad619 100644
>> --- a/drivers/char/agp/Kconfig
>> +++ b/drivers/char/agp/Kconfig
>> @@ -34,7 +34,7 @@ config AGP_ALI
>> X on the following ALi chipsets. The supported chipsets
>> include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
>> For the ALi-chipset question, ALi suggests you refer to
>> - <http://www.ali.com.tw/eng/support/index.shtml>.
>> + <http://www.ali.com.tw/>.
>>
>> The M1541 chipset can do AGP 1x and 2x, but note that there is an
>> acknowledged incompatibility with Matrox G200 cards. Due to
>> diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c
>> index e763d33..75b763c 100644
>> --- a/drivers/char/agp/i460-agp.c
>> +++ b/drivers/char/agp/i460-agp.c
>> @@ -1,7 +1,7 @@
>> /*
>> * For documentation on the i460 AGP interface, see Chapter 7 (AGP Subsystem) of
>> * the "Intel 460GTX Chipset Software Developer's Manual":
>> - * http://developer.intel.com/design/itanium/downloads/24870401s.htm
>> + * http://www.intel.com/design/archives/itanium/downloads/248704.htm
>> */
>> /*
>> * 460GX support by Chris Ahna<christopher.j.ahna at intel.com>
>> diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
>> index 033e150..0848ca9 100644
>> --- a/drivers/char/apm-emulation.c
>> +++ b/drivers/char/apm-emulation.c
>> @@ -7,8 +7,8 @@
>> * Intel Corporation, Microsoft Corporation. Advanced Power Management
>> * (APM) BIOS Interface Specification, Revision 1.2, February 1996.
>> *
>> - * [This document is available from Microsoft at:
>> - * http://www.microsoft.com/hwdev/busbios/amp_12.htm]
>> + * This document is available from Microsoft at:
>> + * http://www.microsoft.com/whdc/archive/amp_12.mspx
>> */
>> #include<linux/module.h>
>> #include<linux/poll.h>
>> diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
>> index 7b98c06..3ed20e8 100644
>> --- a/drivers/char/ipmi/ipmi_bt_sm.c
>> +++ b/drivers/char/ipmi/ipmi_bt_sm.c
>> @@ -2,7 +2,7 @@
>> * ipmi_bt_sm.c
>> *
>> * The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part
>> - * of the driver architecture at http://sourceforge.net/project/openipmi
>> + * of the driver architecture at http://sourceforge.net/projects/openipmi
>> *
>> * Author: Rocky Craig<first.last at hp.com>
>> *
>> diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
>> index 7bd7c45..3e94c37 100644
>> --- a/drivers/char/ipmi/ipmi_si_intf.c
>> +++ b/drivers/char/ipmi/ipmi_si_intf.c
>> @@ -1974,8 +1974,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info)
>>
>> /*
>> * Defined at
>> - * http://h21007.www2.hp.com/portal/download/files
>> - * /unprot/hpspmi.pdf
>> + * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf
>> */
>> struct SPMITable {
>> s8 Signature[4];
>> diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
>> index a98290d..88dda0c 100644
>> --- a/drivers/char/n_r3964.c
>> +++ b/drivers/char/n_r3964.c
>> @@ -4,7 +4,6 @@
>> * Copyright by
>> * Philips Automation Projects
>> * Kassel (Germany)
>> - * http://www.pap-philips.de
>> * -----------------------------------------------------------
>> * This software may be used and distributed according to the terms of
>> * the GNU General Public License, incorporated herein by reference.
>> diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
>> index ffa0efc..6614416 100644
>> --- a/drivers/char/pcmcia/Kconfig
>> +++ b/drivers/char/pcmcia/Kconfig
>> @@ -28,7 +28,7 @@ config CARDMAN_4000
>>
>> This kernel driver requires additional userspace support, either
>> by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/),
>> - or via the cm4000 backend of OpenCT (http://www.opensc.com/).
>> + or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc).
>>
>> config CARDMAN_4040
>> tristate "Omnikey CardMan 4040 support"
>> @@ -41,7 +41,7 @@ config CARDMAN_4040
>> in I/O space. To use the kernel driver, you will need either the
>> PC/SC ifdhandler provided from the Omnikey homepage
>> (http://www.omnikey.com/), or a current development version of OpenCT
>> - (http://www.opensc.org/).
>> + (http://www.opensc-project.org/opensc).
>>
>> config IPWIRELESS
>> tristate "IPWireless 3G UMTS PCMCIA card support"
>> diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
>> index 4dc338f..f6595ab 100644
>> --- a/drivers/char/tpm/Kconfig
>> +++ b/drivers/char/tpm/Kconfig
>> @@ -58,6 +58,6 @@ config TCG_INFINEON
>> To compile this driver as a module, choose M here; the module
>> will be called tpm_infineon.
>> Further information on this driver and the supported hardware
>> - can be found at http://www.prosec.rub.de/tpm
>> + can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/
>>
>> endif # TCG_TPM
>> diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
>> index f584407..76da32e 100644
>> --- a/drivers/char/tpm/tpm_infineon.c
>> +++ b/drivers/char/tpm/tpm_infineon.c
>> @@ -7,7 +7,7 @@
>> * Copyright (C) 2005, Marcel Selhorst<m.selhorst at sirrix.com>
>> * Sirrix AG - security technologies, http://www.sirrix.com and
>> * Applied Data Security Group, Ruhr-University Bochum, Germany
>> - * Project-Homepage: http://www.prosec.rub.de/tpm
>> + * Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/
>> *
>> * This program is free software; you can redistribute it and/or
>> * modify it under the terms of the GNU General Public License as
>> diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c
>> index 0709681..413f0df 100644
>> --- a/drivers/edac/edac_device_sysfs.c
>> +++ b/drivers/edac/edac_device_sysfs.c
>> @@ -1,7 +1,7 @@
>> /*
>> * file for managing the edac_device class of devices for EDAC
>> *
>> - * (C) 2007 SoftwareBitMaker (http://www.softwarebitmaker.com)
>> + * (C) 2007 SoftwareBitMaker
>> *
>> * This file may be distributed under the terms of the
>> * GNU General Public License.
>> diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c
>> index a2fa1fe..678405a 100644
>> --- a/drivers/edac/i82443bxgx_edac.c
>> +++ b/drivers/edac/i82443bxgx_edac.c
>> @@ -12,7 +12,7 @@
>> * 440GX fix by Jason Uhlenkott<juhlenko at akamai.com>.
>> *
>> * Written with reference to 82443BX Host Bridge Datasheet:
>> - * http://www.intel.com/design/chipsets/440/documentation.htm
>> + * http://download.intel.com/design/chipsets/datashts/29063301.pdf
>> * references to this document given in [].
>> *
>> * This module doesn't support the 440LX, but it may be possible to
>> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
>> index 280c9b5..32e67a1 100644
>> --- a/drivers/firmware/Kconfig
>> +++ b/drivers/firmware/Kconfig
>> @@ -73,8 +73,8 @@ config EFI_PCDP
>> on how the driver discovers devices.
>>
>> You must also enable the appropriate drivers (serial, VGA, etc.)
>> -
>> - See<http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
>> + See DIG64_HCDPv20_042804.pdf available from
>> + <http://www.dig64.org/specifications/>
>>
>> config DELL_RBU
>> tristate "BIOS update support for DELL systems via sysfs"
>> diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
>> index f287fe7..96c25d9 100644
>> --- a/drivers/firmware/edd.c
>> +++ b/drivers/firmware/edd.c
>> @@ -15,7 +15,7 @@
>> * made in setup.S, copied to safe structures in setup.c,
>> * and presents it in sysfs.
>> *
>> - * Please see http://linux.dell.com/edd30/results.html for
>> + * Please see http://linux.dell.com/edd/results.html for
>> * the list of BIOSs which have been reported to implement EDD.
>> *
>> * This program is free software; you can redistribute it and/or modify
>> diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h
>> index ce910d6..e098c6e 100644
>> --- a/drivers/firmware/pcdp.h
>> +++ b/drivers/firmware/pcdp.h
>> @@ -1,8 +1,8 @@
>> /*
>> * Definitions for PCDP-defined console devices
>> *
>> - * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf
>> - * v2.0: http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
>> + * For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v10.a and v2.0 resp.),
>> + * please see<http://www.dig64.org/specifications/>
>> *
>> * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P.
>> * Khalid Aziz<khalid.aziz at hp.com>
>> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
>> index 949326d..58e65f9 100644
>> --- a/drivers/gpu/drm/drm_modes.c
>> +++ b/drivers/gpu/drm/drm_modes.c
>> @@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline);
>> * according to the hdisplay, vdisplay, vrefresh.
>> * It is based from the VESA(TM) Coordinated Video Timing Generator by
>> * Graham Loveridge April 9, 2003 available at
>> - * http://www.vesa.org/public/CVT/CVTd6r1.xls
>> + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
>> *
>> * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c.
>> * What I have done is to translate it by using integer calculation.
>> diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
>> index 251b631..60befc0 100644
>> --- a/drivers/hwmon/adm1025.c
>> +++ b/drivers/hwmon/adm1025.c
>> @@ -12,7 +12,7 @@
>> * resolution of about 0.5% of the nominal value). Temperature values are
>> * reported with a 1 deg resolution and a 3 deg accuracy. Complete
>> * datasheet can be obtained from Analog's website at:
>> - * http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html
>> + * http://www.onsemi.com/PowerSolutions/product.do?id=ADM1025
>> *
>> * This driver also supports the ADM1025A, which differs from the ADM1025
>> * only in that it has "open-drain VID inputs while the ADM1025 has
>> diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
>> index 65335b2..4bf969c 100644
>> --- a/drivers/hwmon/adm1026.c
>> +++ b/drivers/hwmon/adm1026.c
>> @@ -6,7 +6,7 @@
>>
>> Chip details at:
>>
>> -<http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf>
>> +<http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026>
>>
>> This program is free software; you can redistribute it and/or modify
>> it under the terms of the GNU General Public License as published by
>> diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
>> index 9638d58..95cbfb3 100644
>> --- a/drivers/hwmon/f75375s.c
>> +++ b/drivers/hwmon/f75375s.c
>> @@ -6,10 +6,10 @@
>> * Datasheets available at:
>> *
>> * f75375:
>> - * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf
>> + * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf
>> *
>> * f75373:
>> - * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf
>> + * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf
>> *
>> * This program is free software; you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License as published by
>> diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c
>> index 1f63d1a..1d6a6fa 100644
>> --- a/drivers/hwmon/g760a.c
>> +++ b/drivers/hwmon/g760a.c
>> @@ -5,7 +5,7 @@
>> Copyright (C) 2007 Herbert Valerio Riedel<hvr at gnu.org>
>>
>> Complete datasheet is available at GMT's website:
>> - http://www.gmt.com.tw/datasheet/g760a.pdf
>> + http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf
>>
>> This program is free software; you can redistribute it and/or modify
>> it under the terms of the GNU General Public License as published by
>> diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
>> index bf0862a..897702d 100644
>> --- a/drivers/hwmon/hwmon-vid.c
>> +++ b/drivers/hwmon/hwmon-vid.c
>> @@ -38,7 +38,7 @@
>> * available at http://developer.intel.com/.
>> *
>> * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
>> - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
>> + * http://developer.amd.com/documentation/articles/pages/1212200690_2.aspx
>> * Table 74. VID Code Voltages
>> * This corresponds to an arbitrary VRM code of 24 in the functions below.
>> * These CPU models (K8 revision<= E) have 5 VID pins. See also:
>> diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
>> index 4516369..97d98fb 100644
>> --- a/drivers/ide/hpt366.c
>> +++ b/drivers/ide/hpt366.c
>> @@ -12,7 +12,7 @@
>> *
>> *
>> * HighPoint has its own drivers (open source except for the RAID part)
>> - * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/.
>> + * available from http://www.highpoint-tech.com/USA_new/service_support.htm
>> * This may be useful to anyone wanting to work on this driver, however do not
>> * trust them too much since the code tends to become less and less meaningful
>> * as the time passes... :-/
>> diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c
>> index d81e496..808bcdc 100644
>> --- a/drivers/ide/ht6560b.c
>> +++ b/drivers/ide/ht6560b.c
>> @@ -10,7 +10,6 @@
>> * Author: Mikko Ala-Fossi<maf at iki.fi>
>> * Jan Evert van Grootheest<j.e.van.grootheest at caiway.nl>
>> *
>> - * Try: http://www.maf.iki.fi/~maf/ht6560b/
>> */
>>
>> #define DRV_NAME "ht6560b"
>> diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
>> index 89d70de..6e35ecc 100644
>> --- a/drivers/infiniband/Kconfig
>> +++ b/drivers/infiniband/Kconfig
>> @@ -16,7 +16,7 @@ config INFINIBAND_USER_MAD
>> Userspace InfiniBand Management Datagram (MAD) support. This
>> is the kernel side of the userspace MAD support, which allows
>> userspace processes to send and receive MADs. You will also
>> - need libibumad from<http://www.openib.org>.
>> + need libibumad from<http://www.openfabrics.org/downloads/management/>.
>>
>> config INFINIBAND_USER_ACCESS
>> tristate "InfiniBand userspace access (verbs and CM)"
>> @@ -28,7 +28,7 @@ config INFINIBAND_USER_ACCESS
>> to set up connections and directly access InfiniBand
>> hardware for fast-path operations. You will also need
>> libibverbs, libibcm and a hardware driver library from
>> - <http://www.openib.org>.
>> + <http://www.openfabrics.org/git/>.
>>
>> config INFINIBAND_USER_MEM
>> bool
>> diff --git a/drivers/infiniband/hw/cxgb3/Kconfig b/drivers/infiniband/hw/cxgb3/Kconfig
>> index 2acec3f..2b6352b 100644
>> --- a/drivers/infiniband/hw/cxgb3/Kconfig
>> +++ b/drivers/infiniband/hw/cxgb3/Kconfig
>> @@ -10,7 +10,7 @@ config INFINIBAND_CXGB3
>> our website at<http://www.chelsio.com>.
>>
>> For customer support, please visit our customer support page at
>> - <http://www.chelsio.com/support.htm>.
>> + <http://www.chelsio.com/support.html>.
>>
>> Please send feedback to<linux-bugs at chelsio.com>.
>>
>> diff --git a/drivers/infiniband/hw/cxgb4/Kconfig b/drivers/infiniband/hw/cxgb4/Kconfig
>> index ccb85ea..6b7e6c5 100644
>> --- a/drivers/infiniband/hw/cxgb4/Kconfig
>> +++ b/drivers/infiniband/hw/cxgb4/Kconfig
>> @@ -10,7 +10,7 @@ config INFINIBAND_CXGB4
>> our website at<http://www.chelsio.com>.
>>
>> For customer support, please visit our customer support page at
>> - <http://www.chelsio.com/support.htm>.
>> + <http://www.chelsio.com/support.html>.
>>
>> Please send feedback to<linux-bugs at chelsio.com>.
>>
>> diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig
>> index b411c51..d00af71 100644
>> --- a/drivers/infiniband/ulp/iser/Kconfig
>> +++ b/drivers/infiniband/ulp/iser/Kconfig
>> @@ -9,4 +9,4 @@ config INFINIBAND_ISER
>>
>> The iSER protocol is defined by IETF.
>> See<http://www.ietf.org/rfc/rfc5046.txt>
>> - and<http://www.infinibandta.org/members/spec/Annex_iSER.PDF>
>> + and<http://members.infinibandta.org/kwspub/spec/Annex_iSER.PDF>
>> diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c
>> index 0ffaf2c..e68e497 100644
>> --- a/drivers/input/joystick/gamecon.c
>> +++ b/drivers/input/joystick/gamecon.c
>> @@ -521,9 +521,8 @@ static void gc_multi_process_packet(struct gc *gc)
>> * PSX support
>> *
>> * See documentation at:
>> - * http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt
>> + * http://www.geocities.co.jp/Playtown/2004/psx/ps_eng.txt
>> * http://www.gamesx.com/controldata/psxcont/psxcont.htm
>> - * ftp://milano.usal.es/pablo/
>> *
>> */
>>
>> diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
>> index 2b0eba6..b09c7d1 100644
>> --- a/drivers/input/misc/cm109.c
>> +++ b/drivers/input/misc/cm109.c
>> @@ -259,7 +259,7 @@ static unsigned short keymap_usbph01(int scancode)
>>
>> /*
>> * Keymap for ATCom AU-100
>> - * http://www.atcom.cn/En_products_AU100.html
>> + * http://www.atcom.cn/products.html
>> * http://www.packetizer.com/products/au100/
>> * http://www.voip-info.org/wiki/view/AU-100
>> *
>> diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
>> index c714ca2..bf5fd7f 100644
>> --- a/drivers/input/mouse/Kconfig
>> +++ b/drivers/input/mouse/Kconfig
>> @@ -30,6 +30,7 @@ config MOUSE_PS2
>> <http://w1.894.telia.com/~u89404340/touchpad/index.html>
>> and a new version of GPM at:
>> <http://www.geocities.com/dt_or/gpm/gpm.html>
>> + <http://xorg.freedesktop.org/archive/individual/driver/>
>> to take advantage of the advanced features of the touchpad.
>>
>> If unsure, say Y.
>> diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c
>> index 88121c5..1fd8f5e 100644
>> --- a/drivers/input/mouse/touchkit_ps2.c
>> +++ b/drivers/input/mouse/touchkit_ps2.c
>> @@ -21,8 +21,8 @@
>> *
>> * Based upon touchkitusb.c
>> *
>> - * Vendor documentation is available in support section of:
>> - * http://www.egalax.com.tw/
>> + * Vendor documentation is available at:
>> + * http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_v2.0.pdf
>> */
>>
>> #include<linux/kernel.h>
>> diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c
>> index efd3aeb..36e57de 100644
>> --- a/drivers/input/touchscreen/mk712.c
>> +++ b/drivers/input/touchscreen/mk712.c
>> @@ -17,7 +17,7 @@
>> * found in Gateway AOL Connected Touchpad computers.
>> *
>> * Documentation for ICS MK712 can be found at:
>> - * http://www.icst.com/pdf/mk712.pdf
>> + * http://www.idt.com/products/getDoc.cfm?docID=18713923
>> */
>>
>> /*
>> diff --git a/drivers/isdn/i4l/isdn_audio.c b/drivers/isdn/i4l/isdn_audio.c
>> index 861bdf3..d501393 100644
>> --- a/drivers/isdn/i4l/isdn_audio.c
>> +++ b/drivers/isdn/i4l/isdn_audio.c
>> @@ -439,7 +439,7 @@ isdn_audio_xlaw2adpcm(adpcm_state * s, int fmt, unsigned char *in,
>>
>> /*
>> * Goertzel algorithm.
>> - * See http://ptolemy.eecs.berkeley.edu/~pino/Ptolemy/papers/96/dtmf_ict/
>> + * See http://ptolemy.eecs.berkeley.edu/papers/96/dtmf_ict/
>> * for more info.
>> * Result is stored into an sk_buff and queued up for later
>> * evaluation.
>> diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
>> index d0d2213..9e3e2c5 100644
>> --- a/drivers/macintosh/therm_adt746x.c
>> +++ b/drivers/macintosh/therm_adt746x.c
>> @@ -3,9 +3,9 @@
>> *
>> * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt
>> *
>> - * Documentation from
>> - * http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf
>> - * http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf
>> + * Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_b.pdf
>> + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467
>> + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460
>> *
>> */
>>
>> diff --git a/drivers/media/IR/keymaps/rc-manli.c b/drivers/media/IR/keymaps/rc-manli.c
>> index 1e9fbfa..0f590b3 100644
>> --- a/drivers/media/IR/keymaps/rc-manli.c
>> +++ b/drivers/media/IR/keymaps/rc-manli.c
>> @@ -13,7 +13,6 @@
>> #include<media/rc-map.h>
>>
>> /* Michael Tokarev<mjt at tls.msk.ru>
>> - http://www.corpit.ru/mjt/beholdTV/remote_control.jpg
>> keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at
>> least, and probably other cards too.
>> The "ascii-art picture" below (in comments, first row
>> diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
>> index a6be529..87279d9 100644
>> --- a/drivers/media/dvb/ttpci/av7110.c
>> +++ b/drivers/media/dvb/ttpci/av7110.c
>> @@ -26,7 +26,7 @@
>> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
>> *
>> *
>> - * the project's page is at http://www.linuxtv.org/dvb/
>> + * the project's page is at http://www.linuxtv.org/
>> */
>>
>>
>> @@ -2290,13 +2290,7 @@ static int frontend_init(struct av7110 *av7110)
>> /* Budgetpatch note:
>> * Original hardware design by Roberto Deza:
>> * There is a DVB_Wiki at
>> - * http://212.227.36.83/linuxtv/wiki/index.php/Main_Page
>> - * where is described this 'DVB TT Budget Patch', on Card Modding:
>> - * http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch
>> - * On the short description there is also a link to a external file,
>> - * with more details:
>> - * http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip
>> - *
>> + * http://www.linuxtv.org/
>> * New software triggering design by Emard that works on
>> * original Roberto Deza's hardware:
>> *
>> diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c
>> index 13efba9..878da6a 100644
>> --- a/drivers/media/dvb/ttpci/av7110_av.c
>> +++ b/drivers/media/dvb/ttpci/av7110_av.c
>> @@ -25,7 +25,7 @@
>> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
>> *
>> *
>> - * the project's page is at http://www.linuxtv.org/dvb/
>> + * the project's page is at http://www.linuxtv.org/
>> */
>>
>> #include<linux/types.h>
>> diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c
>> index 4eba35a..7564c26 100644
>> --- a/drivers/media/dvb/ttpci/av7110_ca.c
>> +++ b/drivers/media/dvb/ttpci/av7110_ca.c
>> @@ -25,7 +25,7 @@
>> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
>> *
>> *
>> - * the project's page is at http://www.linuxtv.org/dvb/
>> + * the project's page is at http://www.linuxtv.org/
>> */
>>
>> #include<linux/kernel.h>
>> diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
>> index e162691..f1cbfe5 100644
>> --- a/drivers/media/dvb/ttpci/av7110_hw.c
>> +++ b/drivers/media/dvb/ttpci/av7110_hw.c
>> @@ -22,7 +22,7 @@
>> * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
>> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
>> *
>> - * the project's page is at http://www.linuxtv.org/dvb/
>> + * the project's page is at http://www.linuxtv.org/
>> */
>>
>> /* for debugging ARM communication: */
>> diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
>> index 8986d96..ac20c5b 100644
>> --- a/drivers/media/dvb/ttpci/av7110_v4l.c
>> +++ b/drivers/media/dvb/ttpci/av7110_v4l.c
>> @@ -22,7 +22,7 @@
>> * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
>> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
>> *
>> - * the project's page is at http://www.linuxtv.org/dvb/
>> + * the project's page is at http://www.linuxtv.org/
>> */
>>
>> #include<linux/kernel.h>
>> diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
>> index 983672a..97afc01 100644
>> --- a/drivers/media/dvb/ttpci/budget-av.c
>> +++ b/drivers/media/dvb/ttpci/budget-av.c
>> @@ -30,7 +30,7 @@
>> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
>> *
>> *
>> - * the project's page is at http://www.linuxtv.org/dvb/
>> + * the project's page is at http://www.linuxtv.org/
>> */
>>
>> #include "budget.h"
>> diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
>> index 13ac9e3..a9c2c32 100644
>> --- a/drivers/media/dvb/ttpci/budget-ci.c
>> +++ b/drivers/media/dvb/ttpci/budget-ci.c
>> @@ -26,7 +26,7 @@
>> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
>> *
>> *
>> - * the project's page is at http://www.linuxtv.org/dvb/
>> + * the project's page is at http://www.linuxtv.org/
>> */
>>
>> #include<linux/module.h>
>> diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c
>> index ba18e56..0546613 100644
>> --- a/drivers/media/dvb/ttpci/budget-core.c
>> +++ b/drivers/media/dvb/ttpci/budget-core.c
>> @@ -31,7 +31,7 @@
>> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
>> *
>> *
>> - * the project's page is at http://www.linuxtv.org/dvb/
>> + * the project's page is at http://www.linuxtv.org/
>> */
>>
>>
>> diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
>> index 9c92f9d..5798355 100644
>> --- a/drivers/media/dvb/ttpci/budget-patch.c
>> +++ b/drivers/media/dvb/ttpci/budget-patch.c
>> @@ -27,7 +27,7 @@
>> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
>> *
>> *
>> - * the project's page is at http://www.linuxtv.org/dvb/
>> + * the project's page is at http://www.linuxtv.org/
>> */
>>
>> #include "av7110.h"
>> diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
>> index 874a10a..d238fb9 100644
>> --- a/drivers/media/dvb/ttpci/budget.c
>> +++ b/drivers/media/dvb/ttpci/budget.c
>> @@ -31,7 +31,7 @@
>> * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
>> *
>> *
>> - * the project's page is at http://www.linuxtv.org/dvb/
>> + * the project's page is at http://www.linuxtv.org/
>> */
>>
>> #include "budget.h"
>> diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
>> index 4349213..255d40d 100644
>> --- a/drivers/media/radio/radio-maxiradio.c
>> +++ b/drivers/media/radio/radio-maxiradio.c
>> @@ -13,7 +13,7 @@
>> * anybody does please mail me.
>> *
>> * For the pdf file see:
>> - * http://www.semiconductors.philips.com/pip/TEA5757H/V1
>> + * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf
>> *
>> *
>> * CHANGES:
>> diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c
>> index 0343928..a5363ed 100644
>> --- a/drivers/media/radio/radio-typhoon.c
>> +++ b/drivers/media/radio/radio-typhoon.c
>> @@ -1,8 +1,6 @@
>> /* Typhoon Radio Card driver for radio support
>> * (c) 1999 Dr. Henrik Seidel<Henrik.Seidel at gmx.de>
>> *
>> - * Card manufacturer:
>> - * http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e
>> *
>> * Notes on the hardware
>> *
>> diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
>> index f6e4d04..d000522 100644
>> --- a/drivers/media/video/Kconfig
>> +++ b/drivers/media/video/Kconfig
>> @@ -978,7 +978,7 @@ config USB_STKWEBCAM
>> Supported devices are typically found in some Asus laptops,
>> with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
>> may be supported by the stk11xx driver, from which this is
>> - derived, see http://stk11xx.sourceforge.net
>> + derived, see<http://sourceforge.net/projects/syntekdriver/>
>>
>> To compile this driver as a module, choose M here: the
>> module will be called stkwebcam.
>> diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
>> index be35e69..9536f1a 100644
>> --- a/drivers/media/video/cafe_ccic.c
>> +++ b/drivers/media/video/cafe_ccic.c
>> @@ -4,7 +4,7 @@
>> * sensor.
>> *
>> * The data sheet for this device can be found at:
>> - * http://www.marvell.com/products/pcconn/88ALP01.jsp
>> + * http://www.marvell.com/products/pc_connectivity/88alp01/
>> *
>> * Copyright 2006 One Laptop Per Child Association, Inc.
>> * Copyright 2006-7 Jonathan Corbet<corbet at lwn.net>
>> diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
>> index 6b805af..fe10909 100644
>> --- a/drivers/media/video/cx18/cx18-cards.c
>> +++ b/drivers/media/video/cx18/cx18-cards.c
>> @@ -39,7 +39,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = {
>> .tv = { 0x61, 0x60, I2C_CLIENT_END },
>> };
>>
>> -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii
>> +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/
>> This keeps the PCI ID database up to date. Note that the entries
>> must be added under vendor 0x4444 (Conexant) as subsystem IDs.
>> New vendor IDs should still be added to the vendor ID list. */
>> diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
>> index abd64e8..53a6782 100644
>> --- a/drivers/media/video/cx23885/cx23885-417.c
>> +++ b/drivers/media/video/cx23885/cx23885-417.c
>> @@ -7,7 +7,7 @@
>> * (c) 2008 Steven Toth<stoth at linuxtv.org>
>> * - CX23885/7/8 support
>> *
>> - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
>> + * Includes parts from the ivtv driver<http://sourceforge.net/projects/ivtv/>
>> *
>> * This program is free software; you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License as published by
>> diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
>> index e46e1ce..660b2a9 100644
>> --- a/drivers/media/video/cx88/cx88-blackbird.c
>> +++ b/drivers/media/video/cx88/cx88-blackbird.c
>> @@ -9,7 +9,7 @@
>> * (c) 2005-2006 Mauro Carvalho Chehab<mchehab at infradead.org>
>> * - video_ioctl2 conversion
>> *
>> - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
>> + * Includes parts from the ivtv driver<http://sourceforge.net/projects/ivtv/>
>> *
>> * This program is free software; you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License as published by
>> diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c
>> index ca1fd32..87afbbe 100644
>> --- a/drivers/media/video/ivtv/ivtv-cards.c
>> +++ b/drivers/media/video/ivtv/ivtv-cards.c
>> @@ -65,7 +65,7 @@ static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 = {
>>
>> /********************** card configuration *******************************/
>>
>> -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii
>> +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/
>> This keeps the PCI ID database up to date. Note that the entries
>> must be added under vendor 0x4444 (Conexant) as subsystem IDs.
>> New vendor IDs should still be added to the vendor ID list. */
>> diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
>> index ef0c817..b1dbcf1 100644
>> --- a/drivers/media/video/mxb.c
>> +++ b/drivers/media/video/mxb.c
>> @@ -3,7 +3,7 @@
>>
>> Copyright (C) 1998-2006 Michael Hunold<michael at mihu.de>
>>
>> - Visit http://www.mihu.de/linux/saa7146/mxb/
>> + Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html
>> for further details about this card.
>>
>> This program is free software; you can redistribute it and/or modify
>> diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
>> index 2782f94..2e86fdc 100644
>> --- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
>> +++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c
>> @@ -4,7 +4,6 @@
>> * *
>> * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio *
>> *<medaglia at undl.org.br> *
>> - * http://cadu.homelinux.com:8080/ *
>> * *
>> * Support for SN9C103, DAC Magnitude, exposure and green gain controls *
>> * added by Luca Risolia<luca.risolia at studio.unibo.it> *
>> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
>> index b743312..3b28933 100644
>> --- a/drivers/misc/Kconfig
>> +++ b/drivers/misc/Kconfig
>> @@ -112,8 +112,8 @@ config IBM_ASM
>>
>> WARNING: This software may not be supported or function
>> correctly on your IBM server. Please consult the IBM ServerProven
>> - website<http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for
>> - information on the specific driver level and support statement
>> + website<http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
>> + for information on the specific driver level and support statement
>> for your IBM server.
>>
>> config PHANTOM
>> diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
>> index 3e6c47b..ba29d2f 100644
>> --- a/drivers/mtd/chips/cfi_cmdset_0002.c
>> +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
>> @@ -418,8 +418,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary)
>>
>> /*
>> * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4
>> - * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19
>> - * http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf
>> + * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19
>> + * http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf
>> * http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf
>> */
>> if (extp->MajorVersion != '1' ||
>> diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
>> index f4359fe..caf6041 100644
>> --- a/drivers/mtd/devices/lart.c
>> +++ b/drivers/mtd/devices/lart.c
>> @@ -17,7 +17,7 @@
>> * - January 2000
>> *
>> * [2] MTD internal API documentation
>> - * - http://www.linux-mtd.infradead.org/tech/
>> + * - http://www.linux-mtd.infradead.org/
>> *
>> * Limitations:
>> *
>> diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c
>> index 4d6a64c..037b399 100644
>> --- a/drivers/mtd/ftl.c
>> +++ b/drivers/mtd/ftl.c
>> @@ -51,7 +51,7 @@
>>
>> Use of the FTL format for non-PCMCIA applications may be an
>> infringement of these patents. For additional information,
>> - contact M-Systems (http://www.m-sys.com) directly.
>> + contact M-Systems directly. M-Systems since acquired by Sandisk.
>>
>> ======================================================================*/
>> #include<linux/mtd/blktrans.h>
>> diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
>> index 701d942..9622126 100644
>> --- a/drivers/mtd/maps/Kconfig
>> +++ b/drivers/mtd/maps/Kconfig
>> @@ -172,7 +172,7 @@ config MTD_OCTAGON
>> This provides a 'mapping' driver which supports the way in which
>> the flash chips are connected in the Octagon-5066 Single Board
>> Computer. More information on the board is available at
>> - <http://www.octagonsystems.com/CPUpages/5066.html>.
>> + <http://www.octagonsystems.com/products/5066.aspx>.
>>
>> config MTD_VMAX
>> tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301"
>> @@ -284,7 +284,7 @@ config MTD_TQM8XXL
>> chips, currently uses AMD one. This 'mapping' driver supports
>> that arrangement, allowing the CFI probe and command set driver
>> code to communicate with the chips on the TQM8xxL board. More at
>> - <http://www.denx.de/embedded-ppc-en.html>.
>> + <http://www.denx.de/wiki/PPCEmbedded/>.
>>
>> config MTD_RPXLITE
>> tristate "CFI Flash device mapped on RPX Lite or CLLF"
>> diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
>> index db1dfc5..e06c898 100644
>> --- a/drivers/mtd/nand/cafe_nand.c
>> +++ b/drivers/mtd/nand/cafe_nand.c
>> @@ -2,7 +2,7 @@
>> * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01
>> *
>> * The data sheet for this device can be found at:
>> - * http://www.marvell.com/products/pcconn/88ALP01.jsp
>> + * http://wiki.laptop.org/go/Datasheets
>> *
>> * Copyright © 2006 Red Hat, Inc.
>> * Copyright © 2006 David Woodhouse<dwmw2 at infradead.org>
>> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
>> index 2cc81a5..5b66842 100644
>> --- a/drivers/net/Kconfig
>> +++ b/drivers/net/Kconfig
>> @@ -921,7 +921,7 @@ config SMC91X
>> including the SMC91C94 and the SMC91C111. Say Y if you want it
>> compiled into the kernel, and read the file
>> <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
>> - available from<http://www.linuxdoc.org/docs.html#howto>.
>> + available from<http://www.tldp.org/docs.html#howto>.
>>
>> This driver is also available as a module ( = code which can be
>> inserted in and removed from the running kernel whenever you want).
>> @@ -1031,7 +1031,7 @@ config SMC911X
>> including the new LAN9115, LAN9116, LAN9117, and LAN9118.
>> Say Y if you want it compiled into the kernel,
>> and read the Ethernet-HOWTO, available from
>> - <http://www.linuxdoc.org/docs.html#howto>.
>> + <http://www.tldp.org/docs.html#howto>.
>>
>> This driver is also available as a module. The module will be
>> called smc911x. If you want to compile it as a module, say M
>> @@ -1513,7 +1513,7 @@ config E100
>>
>> For the latest Intel PRO/100 network driver for Linux, see:
>>
>> - <http://appsr.intel.com/scripts-df/support_intel.asp>
>> + <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
>>
>> More specific information on configuring the driver is in
>> <file:Documentation/networking/e100.txt>.
>> @@ -1539,9 +1539,8 @@ config FEALNX
>> select CRC32
>> select MII
>> help
>> - Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
>> - cards. Specifications and data at
>> - <http://www.myson.com.hk/mtd/datasheet/>.
>> + Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
>> + cards.<http://www.myson.com.tw/>
>>
>> config NATSEMI
>> tristate "National Semiconductor DP8381x series PCI Ethernet support"
>> @@ -1715,7 +1714,7 @@ config SMSC9420
>> This is a driver for SMSC's LAN9420 PCI ethernet adapter.
>> Say Y if you want it compiled into the kernel,
>> and read the Ethernet-HOWTO, available from
>> - <http://www.linuxdoc.org/docs.html#howto>.
>> + <http://www.tldp.org/docs.html#howto>.
>>
>> This driver is also available as a module. The module will be
>> called smsc9420. If you want to compile it as a module, say M
>> @@ -2550,7 +2549,7 @@ config CHELSIO_T1
>> our website at<http://www.chelsio.com>.
>>
>> For customer support, please visit our customer support page at
>> -<http://www.chelsio.com/support.htm>.
>> +<http://www.chelsio.com/support.html>.
>>
>> Please send feedback to<linux-bugs at chelsio.com>.
>>
>> @@ -2582,7 +2581,7 @@ config CHELSIO_T3
>> our website at<http://www.chelsio.com>.
>>
>> For customer support, please visit our customer support page at
>> - <http://www.chelsio.com/support.htm>.
>> + <http://www.chelsio.com/support.html>.
>>
>> Please send feedback to<linux-bugs at chelsio.com>.
>>
>> @@ -2607,7 +2606,7 @@ config CHELSIO_T4
>> our website at<http://www.chelsio.com>.
>>
>> For customer support, please visit our customer support page at
>> - <http://www.chelsio.com/support.htm>.
>> + <http://www.chelsio.com/support.html>.
>>
>> Please send feedback to<linux-bugs at chelsio.com>.
>>
>> @@ -2630,7 +2629,7 @@ config CHELSIO_T4VF
>> our website at<http://www.chelsio.com>.
>>
>> For customer support, please visit our customer support page at
>> - <http://www.chelsio.com/support.htm>.
>> + <http://www.chelsio.com/support.html>.
>>
>> Please send feedback to<linux-bugs at chelsio.com>.
>>
>> diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
>> index 0a0e0cd..f5a8916 100644
>> --- a/drivers/net/appletalk/Kconfig
>> +++ b/drivers/net/appletalk/Kconfig
>> @@ -18,7 +18,7 @@ config ATALK
>>
>> General information about how to connect Linux, Windows machines and
>> Macs is on the WWW at<http://www.eats.com/linux_mac_win.html>. The
>> - NET-3-HOWTO, available from
>> + NET3-4-HOWTO, available from
>> <http://www.tldp.org/docs.html#howto>, contains valuable
>> information as well.
>>
>> diff --git a/drivers/net/atp.c b/drivers/net/atp.c
>> index bd2f9d3..0eee044 100644
>> --- a/drivers/net/atp.c
>> +++ b/drivers/net/atp.c
>> @@ -68,7 +68,7 @@ static int xcvr[NUM_UNITS]; /* The data transfer mode. */
>>
>> In 1997 Realtek made available the documentation for the second generation
>> RTL8012 chip, which has lead to several driver improvements.
>> - http://www.realtek.com.tw/cn/cn.html
>> + http://www.realtek.com.tw/
>>
>> Theory of Operation
>>
>> diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
>> index 57c8ac0..c6e2571 100644
>> --- a/drivers/net/epic100.c
>> +++ b/drivers/net/epic100.c
>> @@ -131,8 +131,8 @@ IIIa. Ring buffers
>>
>> IVb. References
>>
>> -http://www.smsc.com/main/tools/discontinued/83c171.pdf
>> -http://www.smsc.com/main/tools/discontinued/83c175.pdf
>> +http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf
>> +http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf
>> http://scyld.com/expert/NWay.html
>> http://www.national.com/pf/DP/DP83840A.html
>>
>> diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
>> index 62d5d5c..95dbcfd 100644
>> --- a/drivers/net/hamradio/Kconfig
>> +++ b/drivers/net/hamradio/Kconfig
>> @@ -73,7 +73,7 @@ config DMASCC
>> certain parameters, such as channel access timing, clock mode, and
>> DMA channel. This is accomplished with a small utility program,
>> dmascc_cfg, available at
>> - <http://cacofonix.nt.tuwien.ac.at/~oe1kib/Linux/>. Please be sure to
>> + <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to
>> get at least version 1.27 of dmascc_cfg, as older versions will not
>> work with the current driver.
>>
>> diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
>> index 294ccfb..8de3273 100644
>> --- a/drivers/net/ibmlana.c
>> +++ b/drivers/net/ibmlana.c
>> @@ -23,7 +23,7 @@ paper sources:
>> 'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0
>> Document Number SC30-3661-00' by IBM for info on the adapter itself
>>
>> - Also see http://www.natsemi.com/
>> + Also see http://www.national.com/analog
>>
>> special acknowledgements to:
>> - Bob Eager for helping me out with documentation from IBM
>> diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
>> index 36c3060..4dc39e5 100644
>> --- a/drivers/net/irda/donauboe.h
>> +++ b/drivers/net/irda/donauboe.h
>> @@ -54,7 +54,7 @@
>> /* anyone who has. HOWEVER the chip bears a striking resemblence */
>> /* to the IrDA controller in the Toshiba RISC TMPR3922 chip */
>> /* the documentation for this is freely available at */
>> -/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */
>> +/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */
>> /* The mapping between the registers in that document and the */
>> /* Registers in the 701 oboe chip are as follows */
>>
>> diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
>> index 56f3fc4..627b619 100644
>> --- a/drivers/net/pci-skeleton.c
>> +++ b/drivers/net/pci-skeleton.c
>> @@ -78,7 +78,7 @@ that almost all frames will need to be copied to an alignment buffer.
>>
>> IVb. References
>>
>> -http://www.realtek.com.tw/cn/cn.html
>> +http://www.realtek.com.tw/
>> http://www.scyld.com/expert/NWay.html
>>
>> IVc. Errata
>> diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
>> index c683f77..e092679 100644
>> --- a/drivers/net/pcmcia/3c574_cs.c
>> +++ b/drivers/net/pcmcia/3c574_cs.c
>> @@ -62,7 +62,7 @@ invalid ramWidth is Very Bad.
>> V. References
>>
>> http://www.scyld.com/expert/NWay.html
>> -http://www.national.com/pf/DP/DP83840.html
>> +http://www.national.com/opf/DP/DP83840A.html
>>
>> Thanks to Terry Murphy of 3Com for providing development information for
>> earlier 3Com products.
>> diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
>> index 8c4067a..12fb560 100644
>> --- a/drivers/net/sc92031.c
>> +++ b/drivers/net/sc92031.c
>> @@ -15,7 +15,7 @@
>> * Rewritten for 2.6 by Cesar Eduardo Barros
>> *
>> * A datasheet for this chip can be found at
>> - * http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf
>> + * http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf
>> */
>>
>> /* Note about set_mac_address: I don't know how to change the hardware
>> diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
>> index ccee3ed..ef000b2 100644
>> --- a/drivers/net/tlan.c
>> +++ b/drivers/net/tlan.c
>> @@ -78,7 +78,7 @@
>> * - Updated tlan.txt accordingly.
>> * - Adjusted minimum/maximum frame length.
>> * - There is now a TLAN website up at
>> - * http://tlan.kernel.dk
>> + * http://hp.sourceforge.net/
>> *
>> * v1.7 April 07, 2000 - Started to implement custom ioctls. Driver now
>> * reports PHY information when used with Donald
>> diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
>> index 435ef7d..ccc16d6 100644
>> --- a/drivers/net/tokenring/tms380tr.c
>> +++ b/drivers/net/tokenring/tms380tr.c
>> @@ -5,7 +5,7 @@
>> * Originally sktr.c: Written 1997 by Christoph Goos
>> *
>> * A fine result of the Linux Systems Network Architecture Project.
>> - * http://www.linux-sna.org
>> + * http://www.vanheusden.com/sna/
>> *
>> * This software may be used and distributed according to the terms
>> * of the GNU General Public License, incorporated herein by reference.
>> diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
>> index 516713f..14c02e1 100644
>> --- a/drivers/net/tulip/Kconfig
>> +++ b/drivers/net/tulip/Kconfig
>> @@ -151,7 +151,7 @@ config ULI526X
>> select CRC32
>> ---help---
>> This driver is for ULi M5261/M5263 10/100M Ethernet Controller
>> - (<http://www.uli.com.tw/>).
>> + (<http://www.nvidia.com/page/uli_drivers.html>).
>>
>> To compile this driver as a module, choose M here. The module will
>> be called uli526x.
>> diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
>> index 08555f8..08ad269 100644
>> --- a/drivers/net/usb/plusb.c
>> +++ b/drivers/net/usb/plusb.c
>> @@ -32,7 +32,7 @@
>>
>>
>> /*
>> - * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
>> + * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/
>> *
>> * The protocol and handshaking used here should be bug-compatible
>> * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
>> diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
>> index d08ce6a..423eb26 100644
>> --- a/drivers/net/wan/Kconfig
>> +++ b/drivers/net/wan/Kconfig
>> @@ -409,7 +409,7 @@ config CYCLADES_SYNC
>> tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)"
>> depends on WAN_ROUTER_DRIVERS&& (PCI || ISA)
>> ---help---
>> - Cyclom 2X from Cyclades Corporation<http://www.cyclades.com/> is an
>> + Cyclom 2X from Cyclades Corporation<http://www.avocent.com/> is an
>> intelligent multiprotocol WAN adapter with data transfer rates up to
>> 512 Kbps. These cards support the X.25 and SNA related protocols.
>>
>> diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
>> index ea6362a..97659a0 100644
>> --- a/drivers/net/wireless/ath/ath5k/ath5k.h
>> +++ b/drivers/net/wireless/ath/ath5k/ath5k.h
>> @@ -351,7 +351,7 @@ struct ath5k_srev_name {
>> /*
>> * Some of this information is based on Documentation from:
>> *
>> - * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
>> + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG
>> *
>> * Modulation for Atheros' eXtended Range - range enhancing extension that is
>> * supposed to double the distance an Atheros client device can keep a
>> diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
>> index 55b4ac6..69a9b34 100644
>> --- a/drivers/net/wireless/ath/ath5k/reg.h
>> +++ b/drivers/net/wireless/ath/ath5k/reg.h
>> @@ -26,7 +26,6 @@
>> * Atheros presentations and papers like these:
>> *
>> * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf
>> - * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
>> *
>> * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
>> *
>> diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
>> index b0342a5..8e82379 100644
>> --- a/drivers/net/wireless/p54/Kconfig
>> +++ b/drivers/net/wireless/p54/Kconfig
>> @@ -8,7 +8,7 @@ config P54_COMMON
>> also need to be enabled in order to support any devices.
>>
>> These devices require softmac firmware which can be found at
>> - http://prism54.org/
>> + <http://wireless.kernel.org/en/users/Drivers/p54>
>>
>> If you choose to build a module, it'll be called p54common.
>>
>> @@ -20,7 +20,7 @@ config P54_USB
>> This driver is for USB isl38xx based wireless cards.
>>
>> These devices require softmac firmware which can be found at
>> - http://prism54.org/
>> + <http://wireless.kernel.org/en/users/Drivers/p54>
>>
>> If you choose to build a module, it'll be called p54usb.
>>
>> @@ -34,7 +34,7 @@ config P54_PCI
>> supported by the fullmac driver/firmware.
>>
>> This driver requires softmac firmware which can be found at
>> - http://prism54.org/
>> + <http://wireless.kernel.org/en/users/Drivers/p54>
>>
>> If you choose to build a module, it'll be called p54pci.
>>
>> diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
>> index dc14420..b5e64d7 100644
>> --- a/drivers/net/wireless/prism54/islpci_hotplug.c
>> +++ b/drivers/net/wireless/prism54/islpci_hotplug.c
>> @@ -38,7 +38,7 @@ module_param(init_pcitm, int, 0);
>> /* In this order: vendor, device, subvendor, subdevice, class, class_mask,
>> * driver_data
>> * If you have an update for this please contact prism54-devel at prism54.org
>> - * The latest list can be found at http://prism54.org/supported_cards.php */
>> + * The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */
>> static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = {
>> /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
>> {
>> diff --git a/drivers/parisc/README.dino b/drivers/parisc/README.dino
>> index 097324f..1627426 100644
>> --- a/drivers/parisc/README.dino
>> +++ b/drivers/parisc/README.dino
>> @@ -10,8 +10,7 @@
>> ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are
>> ** not affected."
>> **
>> -** REVISIT: "go/pci_defect" link below is stale.
>> -** HP Internal can use<http://hpfcdma.fc.hp.com:80/Dino/>
>> +** http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&prodTypeId=12454&prodSeriesId=44443
>> **
>> ** Product First Good Serial Number
>> ** C200/C240 (US) US67350000
>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
>> index 89ed181..dcc333f 100644
>> --- a/drivers/pci/quirks.c
>> +++ b/drivers/pci/quirks.c
>> @@ -206,6 +206,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quir
>> * VIA Apollo KT133 needs PCI latency patch
>> * Made according to a windows driver based patch by George E. Breese
>> * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
>> + * and http://www.georgebreese.com/net/software/#PCI
>> * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for
>> * the info on which Mr Breese based his work.
>> *
>> @@ -996,7 +997,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge)
>> /*
>> * Common misconfiguration of the MediaGX/Geode PCI master that will
>> * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1
>> - * datasheets found at http://www.national.com/ds/GX for info on what
>> + * datasheets found at http://www.national.com/analog for info on what
>> * these bits do.<christer at weinigel.se>
>> */
>> static void quirk_mediagx_master(struct pci_dev *dev)
>> diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
>> index 414d9a6..91a7225 100644
>> --- a/drivers/pcmcia/yenta_socket.c
>> +++ b/drivers/pcmcia/yenta_socket.c
>> @@ -1073,7 +1073,7 @@ static void yenta_config_init(struct yenta_socket *socket)
>> * invisible during PCI scans because of a misconfigured subordinate number
>> * of the parent brige - some BIOSes seem to be too lazy to set it right.
>> * Does the fixup carefully by checking how far it can go without conflicts.
>> - * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
>> + * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
>> */
>> static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
>> {
>> diff --git a/drivers/pnp/pnpbios/proc.c b/drivers/pnp/pnpbios/proc.c
>> index 2d8ac43..bc89f39 100644
>> --- a/drivers/pnp/pnpbios/proc.c
>> +++ b/drivers/pnp/pnpbios/proc.c
>> @@ -11,7 +11,6 @@
>> *
>> * The .../escd file is utilized by the lsescd utility written by
>> * Gunther Mayer.
>> - * http://home.t-online.de/home/gunther.mayer/lsescd
>> *
>> * The .../legacy_device_resources file is not used yet.
>> *
>> diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
>> index bbf91ae..03453d4 100644
>> --- a/drivers/scsi/Kconfig
>> +++ b/drivers/scsi/Kconfig
>> @@ -116,7 +116,7 @@ config CHR_DEV_OSST
>> <http://www.tldp.org/docs.html#howto> and
>> <file:Documentation/scsi/osst.txt> in the kernel source.
>> More info on the OnStream driver may be found on
>> - <http://linux1.onstream.nl/test/>
>> + <http://sourceforge.net/projects/osst/>
>> Please also have a look at the standard st docu, as most of it
>> applies to osst as well.
>>
>> @@ -156,9 +156,9 @@ config CHR_DEV_SG
>> directly, so you need some additional software which knows how to
>> talk to these devices using the SCSI protocol:
>>
>> - For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD
>> + For scanners, look at SANE (<http://www.sane-project.org/>). For CD
>> writer software look at Cdrtools
>> - (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>)
>> + (<http://cdrecord.berlios.de/private/cdrecord.html>)
>> and for burning a "disk at once": CDRDAO
>> (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
>> quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
>> @@ -950,6 +950,7 @@ config SCSI_IPS
>> ---help---
>> This is support for the IBM ServeRAID hardware RAID controllers.
>> See<http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
>> + and<http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
>> for more information. If this driver does not work correctly
>> without modification please contact the author by email at
>> <ipslinux at adaptec.com>.
>> @@ -1609,7 +1610,7 @@ config SCSI_DEBUG
>> host adapter with one dummy SCSI disk. Each dummy disk uses kernel
>> RAM as storage (i.e. it is a ramdisk). To save space when multiple
>> dummy disks are simulated, they share the same kernel RAM for
>> - their storage. See<http://www.torque.net/sg/sdebug.html> for more
>> + their storage. See<http://sg.danny.cz/sg/sdebug26.html> for more
>> information. This driver is primarily of use to those testing the
>> SCSI and block subsystems. If unsure, say N.
>>
>> diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
>> index 24110f6..131c95f 100644
>> --- a/drivers/serial/8250.c
>> +++ b/drivers/serial/8250.c
>> @@ -924,7 +924,7 @@ static int broken_efr(struct uart_8250_port *up)
>> /*
>> * Exar ST16C2550 "A2" devices incorrectly detect as
>> * having an EFR, and report an ID of 0x0201. See
>> - * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf
>> + * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
>> */
>> if (autoconfig_read_divisor_id(up) == 0x0201&& size_fifo(up) == 16)
>> return 1;
>> diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
>> index 5318dd3..feb62a8 100644
>> --- a/drivers/serial/bfin_sport_uart.c
>> +++ b/drivers/serial/bfin_sport_uart.c
>> @@ -10,7 +10,7 @@
>>
>> /*
>> * This driver and the hardware supported are in term of EE-191 of ADI.
>> - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
>> + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf
>> * This application note describe how to implement a UART on a Sharc DSP,
>> * but this driver is implemented on Blackfin Processor.
>> * Transmit Frame Sync is not used by this driver to transfer data out.
>> diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h
>> index 9ce253e..6d06ce1 100644
>> --- a/drivers/serial/bfin_sport_uart.h
>> +++ b/drivers/serial/bfin_sport_uart.h
>> @@ -10,7 +10,7 @@
>>
>> /*
>> * This driver and the hardware supported are in term of EE-191 of ADI.
>> - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
>> + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf
>> * This application note describe how to implement a UART on a Sharc DSP,
>> * but this driver is implemented on Blackfin Processor.
>> * Transmit Frame Sync is not used by this driver to transfer data out.
>> diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
>> index 9b03d7b..3fa2e16 100644
>> --- a/drivers/serial/uartlite.c
>> +++ b/drivers/serial/uartlite.c
>> @@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(of, ulite_of_match);
>> * Register definitions
>> *
>> * For register details see datasheet:
>> - * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf
>> + * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf
>> */
>>
>> #define ULITE_RX 0x00
>> diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README
>> index 96b9717..0d82a6d 100644
>> --- a/drivers/staging/asus_oled/README
>> +++ b/drivers/staging/asus_oled/README
>> @@ -2,7 +2,7 @@
>> Driver for Asus OLED display present in some Asus laptops.
>>
>> The code of this driver is based on 'asusoled' program taken from
>> - https://launchpad.net/asusoled/. I just wanted to have a simple
>> +<http://lapsus.berlios.de/asus_oled.html>. I just wanted to have a simple
>> kernel driver for controlling this device, but I didn't know how
>> to do that. Now I know ;) Also, that program can not be used
>> with usbhid loaded, which means no USB mouse/keyboard while
>> diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
>> index 5b279fb..8c95d8c 100644
>> --- a/drivers/staging/asus_oled/asus_oled.c
>> +++ b/drivers/staging/asus_oled/asus_oled.c
>> @@ -24,7 +24,7 @@
>> *
>> *
>> * Asus OLED support is based on asusoled program taken from
>> - * https://launchpad.net/asusoled/.
>> + *<http://lapsus.berlios.de/asus_oled.html>.
>> *
>> *
>> */
>> diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c
>> index ced346a..78b1410 100644
>> --- a/drivers/staging/comedi/drivers/cb_pcimdas.c
>> +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c
>> @@ -37,7 +37,7 @@ Configuration Options:
>> Developed from cb_pcidas and skel by Richard Bytheway (mocelet at sucs.org).
>> Only supports DIO, AO and simple AI in it's present form.
>> No interrupts, multi channel or FIFO AI, although the card looks like it could support this.
>> -See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more details.
>> +See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details.
>> */
>>
>> #include "../comedidev.h"
>> diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c
>> index 6af6c83..82be77d 100644
>> --- a/drivers/staging/comedi/drivers/daqboard2000.c
>> +++ b/drivers/staging/comedi/drivers/daqboard2000.c
>> @@ -50,8 +50,8 @@ Configuration options:
>> With some help from our swedish distributor, we got the Windows sourcecode
>> for the card, and here are the findings so far.
>>
>> - 1. A good document that describes the PCI interface chip is found at:
>> - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf
>> + 1. A good document that describes the PCI interface chip is 9080db-106.pdf
>> + available from http://www.plxtech.com/products/io/pci9080
>>
>> 2. The initialization done so far is:
>> a. program the FPGA (windows code sans a lot of error messages)
>> diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
>> index 3acf7e6..1411dd8 100644
>> --- a/drivers/staging/comedi/drivers/ni_labpc.c
>> +++ b/drivers/staging/comedi/drivers/ni_labpc.c
>> @@ -37,7 +37,7 @@ boards has not
>> yet been added to the driver, mainly due to the fact that
>> I don't know the device id numbers. If you have one
>> of these boards,
>> -please file a bug report at https://bugs.comedi.org/
>> +please file a bug report at http://comedi.org/
>> so I can get the necessary information from you.
>>
>> The 1200 series boards have onboard calibration dacs for correcting
>> diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c
>> index bd16f91..986ef67 100644
>> --- a/drivers/staging/comedi/drivers/ni_mio_common.c
>> +++ b/drivers/staging/comedi/drivers/ni_mio_common.c
>> @@ -34,7 +34,7 @@
>> 340747b.pdf AT-MIO E series Register Level Programmer Manual
>> 341079b.pdf PCI E Series RLPM
>> 340934b.pdf DAQ-STC reference manual
>> - 67xx and 611x registers (from http://www.ni.com/pdf/daq/us)
>> + 67xx and 611x registers (from ftp://ftp.ni.com/support/daq/mhddk/documentation/)
>> release_ni611x.pdf
>> release_ni67xx.pdf
>> Other possibly relevant info:
>> diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h
>> index 485d63f..0d254a1 100644
>> --- a/drivers/staging/comedi/drivers/plx9080.h
>> +++ b/drivers/staging/comedi/drivers/plx9080.h
>> @@ -13,7 +13,7 @@
>> *
>> ********************************************************************
>> *
>> - * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/
>> + * Copyright (C) 1999 RG Studio s.c.
>> * Written by Krzysztof Halasa<khc at rgstudio.com.pl>
>> *
>> * Portions (C) SBE Inc., used by permission.
>> diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
>> index 0367d2b..a49a7c5 100644
>> --- a/drivers/staging/comedi/drivers/rtd520.c
>> +++ b/drivers/staging/comedi/drivers/rtd520.c
>> @@ -59,7 +59,7 @@ Configuration options:
>> Data sheet: http://www.rtdusa.com/pdf/dm7520.pdf
>> Example source: http://www.rtdusa.com/examples/dm/dm7520.zip
>> Call them and ask for the register level manual.
>> - PCI chip: http://www.plxtech.com/products/toolbox/9080.htm
>> + PCI chip: http://www.plxtech.com/products/io/pci9080
>>
>> Notes:
>> This board is memory mapped. There is some IO stuff, but it isn't needed.
>> diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c
>> index 6612247..ba8f670 100644
>> --- a/drivers/staging/quickstart/quickstart.c
>> +++ b/drivers/staging/quickstart/quickstart.c
>> @@ -5,8 +5,7 @@
>> * Copyright (C) 2007-2010 Angelo Arrifano<miknix at gmail.com>
>> *
>> * Information gathered from disassebled dsdt and from here:
>> - * "http://download.microsoft.com/download/9/c/5/
>> - * 9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc"
>> + *<http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx>
>> *
>> * This program is free software; you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License as published by
>> diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
>> index 1da73ec..bb44079 100644
>> --- a/drivers/uio/Kconfig
>> +++ b/drivers/uio/Kconfig
>> @@ -17,9 +17,9 @@ config UIO_CIF
>> depends on PCI
>> help
>> Driver for Hilscher CIF DeviceNet and Profibus cards. This
>> - driver requires a userspace component that handles all of the
>> - heavy lifting and can be found at:
>> - http://www.osadl.org/projects/downloads/UIO/user/cif-*
>> + driver requires a userspace component called cif that handles
>> + all of the heavy lifting and can be found at:
>> + <http://www.osadl.org/projects/downloads/UIO/user/>
>>
>> To compile this driver as a module, choose M here: the module
>> will be called uio_cif.
>> diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
>> index 916b2b6..b71e309 100644
>> --- a/drivers/usb/serial/Kconfig
>> +++ b/drivers/usb/serial/Kconfig
>> @@ -176,7 +176,7 @@ config USB_SERIAL_VISOR
>> help
>> Say Y here if you want to connect to your HandSpring Visor, Palm
>> m500 or m505 through its USB docking station. See
>> - <http://usbvisor.sourceforge.net/> for more information on using this
>> + <http://usbvisor.sourceforge.net/index.php3> for more information on using this
>> driver.
>>
>> To compile this driver as a module, choose M here: the
>> @@ -289,7 +289,7 @@ config USB_SERIAL_KEYSPAN
>> and was developed with their support. You must also include
>> firmware to support your particular device(s).
>>
>> - See<http://misc.nu/hugh/keyspan.html> for more information.
>> + See<http://blemings.org/hugh/keyspan.html> for more information.
>>
>> To compile this driver as a module, choose M here: the
>> module will be called keyspan.
>> diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
>> index 15a4583..28c640d 100644
>> --- a/drivers/usb/serial/ftdi_sio_ids.h
>> +++ b/drivers/usb/serial/ftdi_sio_ids.h
>> @@ -46,7 +46,7 @@
>> #define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */
>>
>> /* OOCDlink by Joern Kaipf<joernk at web.de>
>> - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
>> + * (http://www.joernonline.de/) */
>> #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
>>
>> /* Luminary Micro Stellaris Boards, VID = FTDI_VID */
>> @@ -335,7 +335,7 @@
>> #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
>>
>> /* ACT Solutions HomePro ZWave interface
>> - (http://www.act-solutions.com/HomePro.htm) */
>> + (http://www.act-solutions.com/HomePro-Product-Matrix.html) */
>> #define FTDI_ACTZWAVE_PID 0xF2D0
>>
>> /*
>> @@ -366,7 +366,7 @@
>> #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
>>
>> /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
>> -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */
>> +/* http://www.usbuirt.com/ */
>> #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
>>
>> /* CCS Inc. ICDU/ICDU40 product ID -
>> @@ -395,7 +395,7 @@
>> */
>> #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
>>
>> -/* Inside Accesso contactless reader (http://www.insidefr.com) */
>> +/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */
>> #define INSIDE_ACCESSO 0xFAD0
>>
>> /*
>> @@ -634,14 +634,14 @@
>>
>> /*
>> * JETI SPECTROMETER SPECBOS 1201
>> - * http://www.jeti.com/products/sys/scb/scb1201.php
>> + * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101
>> */
>> #define JETI_VID 0x0c6c
>> #define JETI_SPC1201_PID 0x04b2
>>
>> /*
>> * FTDI USB UART chips used in construction projects from the
>> - * Elektor Electronics magazine (http://elektor-electronics.co.uk)
>> + * Elektor Electronics magazine (http://www.elektor.com/)
>> */
>> #define ELEKTOR_VID 0x0C7D
>> #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
>> diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
>> index 297163c..0791778 100644
>> --- a/drivers/usb/serial/keyspan.c
>> +++ b/drivers/usb/serial/keyspan.c
>> @@ -9,7 +9,7 @@
>> the Free Software Foundation; either version 2 of the License, or
>> (at your option) any later version.
>>
>> - See http://misc.nu/hugh/keyspan.html for more information.
>> + See http://blemings.org/hugh/keyspan.html for more information.
>>
>> Code in this driver inspired by and in a number of places taken
>> from Brian Warner's original Keyspan-PDA driver.
>> diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
>> index bf3297d..2d8baf6 100644
>> --- a/drivers/usb/serial/keyspan.h
>> +++ b/drivers/usb/serial/keyspan.h
>> @@ -9,7 +9,7 @@
>> the Free Software Foundation; either version 2 of the License, or
>> (at your option) any later version.
>>
>> - See http://misc.nu/hugh/keyspan.html for more information.
>> + See http://blemings.org/hugh/keyspan.html for more information.
>>
>> Code in this driver inspired by and in a number of places taken
>> from Brian Warner's original Keyspan-PDA driver.
>> diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
>> index 3a3f5e6..d325bb8 100644
>> --- a/drivers/usb/serial/mct_u232.h
>> +++ b/drivers/usb/serial/mct_u232.h
>> @@ -10,10 +10,9 @@
>> *
>> * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No.
>> * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
>> - * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further
>> - * information. The properties of this device are listed at the end of this
>> - * file. This device is available from various distributors. I know Hana,
>> - * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25.
>> + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html
>> + * for further information. The properties of this device are listed at the end
>> + * of this file. This device was used in the Dlink DSB-S25.
>> *
>> * All of the information about the device was acquired by using SniffUSB
>> * on Windows98. The technical details of the reverse engineering are
>> @@ -458,7 +457,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
>> * embedded UART. Exhaustive documentation for these is available at:
>> *
>> * http://www.semiconductors.philips.com/pip/p87c52ubaa
>> - * http://www.semiconductors.philips.com/pip/pdiusbd12
>> + * http://www.nxp.com/acrobat_download/various/PDIUSBD12_PROGRAMMING_GUIDE.pdf
>> *
>> * Thanks to Julian Highfield for the pointer to the Philips database.
>> *
>> diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
>> index 8a372ba..b356e15 100644
>> --- a/drivers/usb/storage/Kconfig
>> +++ b/drivers/usb/storage/Kconfig
>> @@ -36,7 +36,7 @@ config USB_STORAGE_DATAFAB
>> depends on USB_STORAGE
>> help
>> Support for certain Datafab CompactFlash readers.
>> - Datafab has a web page at<http://www.datafabusa.com/>.
>> + Datafab has a web page at<http://www.datafab.com/>.
>>
>> If this driver is compiled as a module, it will be named ums-datafab.
>>
>> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
>> index 8b31fdf..dc06ff1 100644
>> --- a/drivers/video/Kconfig
>> +++ b/drivers/video/Kconfig
>> @@ -49,7 +49,7 @@ menuconfig FB
>> You need an utility program called fbset to make full use of frame
>> buffer devices. Please read<file:Documentation/fb/framebuffer.txt>
>> and the Framebuffer-HOWTO at
>> - <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more
>> + <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
>> information.
>>
>> Say Y here and to the driver for your graphics board below if you
>> @@ -955,7 +955,7 @@ config FB_EPSON1355
>> Build in support for the SED1355 Epson Research Embedded RAMDAC
>> LCD/CRT Controller (since redesignated as the S1D13505) as a
>> framebuffer. Product specs at
>> - <http://www.erd.epson.com/vdc/html/products.htm>.
>> + <http://vdc.epson.com/>.
>>
>> config FB_S1D13XXX
>> tristate "Epson S1D13XXX framebuffer support"
>> @@ -966,7 +966,7 @@ config FB_S1D13XXX
>> help
>> Support for S1D13XXX framebuffer device family (currently only
>> working with S1D13806). Product specs at
>> - <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
>> + <http://vdc.epson.com/>
>>
>> config FB_ATMEL
>> tristate "AT91/AT32 LCD Controller support"
>> @@ -1323,7 +1323,7 @@ config FB_RADEON
>> don't need to choose this to run the Radeon in plain VGA mode.
>>
>> There is a product page at
>> - http://apps.ati.com/ATIcompare/
>> + http://products.amd.com/en-us/GraphicCardResult.aspx
>>
>> config FB_RADEON_I2C
>> bool "DDC/I2C for ATI Radeon support"
>> @@ -1395,7 +1395,7 @@ config FB_ATY_CT
>> Say Y here to support use of ATI's 64-bit Rage boards (or other
>> boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
>> framebuffer device. The ATI product support page for these boards
>> - is at<http://support.ati.com/products/pc/mach64/>.
>> + is at<http://support.ati.com/products/pc/mach64/mach64.html>.
>>
>> config FB_ATY_GENERIC_LCD
>> bool "Mach64 generic LCD support (EXPERIMENTAL)"
>> diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c
>> index f3d7440..3ec4923 100644
>> --- a/drivers/video/arcfb.c
>> +++ b/drivers/video/arcfb.c
>> @@ -2,7 +2,6 @@
>> * linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board
>> *
>> * Copyright (C) 2005, Jaya Kumar<jayalk at intworks.biz>
>> - * http://www.intworks.biz/arclcd
>> *
>> * This file is subject to the terms and conditions of the GNU General Public
>> * License. See the file COPYING in the main directory of this archive for
>> diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
>> index db9713b..a268cbf 100644
>> --- a/drivers/video/epson1355fb.c
>> +++ b/drivers/video/epson1355fb.c
>> @@ -4,7 +4,7 @@
>> * Epson Research S1D13505 Embedded RAMDAC LCD/CRT Controller
>> * (previously known as SED1355)
>> *
>> - * Cf. http://www.erd.epson.com/vdc/html/S1D13505.html
>> + * Cf. http://vdc.epson.com/
>> *
>> *
>> * Copyright (C) Hewlett-Packard Company. All rights reserved.
>> diff --git a/drivers/video/fbcvt.c b/drivers/video/fbcvt.c
>> index 7293eac..7cb715d 100644
>> --- a/drivers/video/fbcvt.c
>> +++ b/drivers/video/fbcvt.c
>> @@ -5,7 +5,7 @@
>> *
>> * Based from the VESA(TM) Coordinated Video Timing Generator by
>> * Graham Loveridge April 9, 2003 available at
>> - * http://www.vesa.org/public/CVT/CVTd6r1.xls
>> + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
>> *
>> * This file is subject to the terms and conditions of the GNU General Public
>> * License. See the file COPYING in the main directory of this archive
>> diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c
>> index c77bcc6..e225c00 100644
>> --- a/drivers/video/hecubafb.c
>> +++ b/drivers/video/hecubafb.c
>> @@ -10,7 +10,7 @@
>> *
>> * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
>> * This work was possible because of apollo display code from E-Ink's website
>> - * http://support.eink.com/community
>> + * http://eink.com/
>> * All information used to write this code is from public material made
>> * available by E-Ink on its support site. Some commands such as 0xA4
>> * were found by looping through cmd=0x00 thru 0xFF and supplying random
>> diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c
>> index 9b3d6e4..63ed3b7 100644
>> --- a/drivers/video/metronomefb.c
>> +++ b/drivers/video/metronomefb.c
>> @@ -10,7 +10,7 @@
>> * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
>> *
>> * This work was made possible by help and equipment support from E-Ink
>> - * Corporation. http://support.eink.com/community
>> + * Corporation. http://www.eink.com/
>> *
>> * This driver is written to be used with the Metronome display controller.
>> * It is intended to be architecture independent. A board specific driver
>> diff --git a/firmware/keyspan_pda/keyspan_pda.S b/firmware/keyspan_pda/keyspan_pda.S
>> index 418fe69..f3acc19 100644
>> --- a/firmware/keyspan_pda/keyspan_pda.S
>> +++ b/firmware/keyspan_pda/keyspan_pda.S
>> @@ -74,7 +74,7 @@
>> * recognizes the new device ID and glues it to the real serial driver code.
>> *
>> * USEFUL DOCS:
>> - * EzUSB Technical Reference Manual:<http://www.anchorchips.com>
>> + * EzUSB Technical Reference Manual:<http://www.cypress.com/>
>> * 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is
>> * basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports
>> * use totally different registers!
>> diff --git a/firmware/keyspan_pda/xircom_pgs.S b/firmware/keyspan_pda/xircom_pgs.S
>> index 05d99dd..0b79bbf 100644
>> --- a/firmware/keyspan_pda/xircom_pgs.S
>> +++ b/firmware/keyspan_pda/xircom_pgs.S
>> @@ -74,7 +74,7 @@
>> * recognizes the new device ID and glues it to the real serial driver code.
>> *
>> * USEFUL DOCS:
>> - * EzUSB Technical Reference Manual:<http://www.anchorchips.com>
>> + * EzUSB Technical Reference Manual:<http://www.cypress.com/>
>> * 8051 manuals: everywhere, but try www.dalsemi.com because the EzUSB is
>> * basically the Dallas enhanced 8051 code. Remember that the EzUSB IO ports
>> * use totally different registers!
>> diff --git a/fs/hostfs/hostfs.h b/fs/hostfs/hostfs.h
>> index 6bbd75c..7c232c1 100644
>> --- a/fs/hostfs/hostfs.h
>> +++ b/fs/hostfs/hostfs.h
>> @@ -28,12 +28,7 @@
>> * #define ATTR_KILL_SUID 2048
>> * #define ATTR_KILL_SGID 4096
>> *
>> - * and this is because they were added in 2.5 development in this patch:
>> - *
>> - * http://linux.bkbits.net:8080/linux-2.5/
>> - * cset at 3caf4a12k4XgDzK7wyK-TGpSZ9u2Ww?nav=index.html
>> - * |src/.|src/include|src/include/linux|related/include/linux/fs.h
>> - *
>> + * and this is because they were added in 2.5 development.
>> * Actually, they are not needed by most ->setattr() methods - they are set by
>> * callers of notify_change() to notify that the setuid/setgid bits must be
>> * dropped.
>> diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c
>> index 5bf8a04..789c625 100644
>> --- a/fs/partitions/ldm.c
>> +++ b/fs/partitions/ldm.c
>> @@ -5,7 +5,7 @@
>> * Copyright (c) 2001-2007 Anton Altaparmakov
>> * Copyright (C) 2001,2002 Jakob Kemi<jakob.kemi at telia.com>
>> *
>> - * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/
>> + * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads
>> *
>> * This program is free software; you can redistribute it and/or modify it under
>> * the terms of the GNU General Public License as published by the Free Software
>> diff --git a/fs/partitions/ldm.h b/fs/partitions/ldm.h
>> index d1fb50b..374242c 100644
>> --- a/fs/partitions/ldm.h
>> +++ b/fs/partitions/ldm.h
>> @@ -5,7 +5,7 @@
>> * Copyright (c) 2001-2007 Anton Altaparmakov
>> * Copyright (C) 2001,2002 Jakob Kemi<jakob.kemi at telia.com>
>> *
>> - * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/
>> + * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads
>> *
>> * This program is free software; you can redistribute it and/or modify it
>> * under the terms of the GNU General Public License as published by the Free
>> diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig
>> index 513f431..7cd4666 100644
>> --- a/fs/reiserfs/Kconfig
>> +++ b/fs/reiserfs/Kconfig
>> @@ -10,7 +10,8 @@ config REISERFS_FS
>>
>> In general, ReiserFS is as fast as ext2, but is very efficient with
>> large directories and small files. Additional patches are needed
>> - for NFS and quotas, please see<http://www.namesys.com/> for links.
>> + for NFS and quotas, please see
>> + <https://reiser4.wiki.kernel.org/index.php/Main_Page> for links.
>>
>> It is more easily extended to have features currently found in
>> database and keyword search systems than block allocation based file
>> @@ -18,7 +19,8 @@ config REISERFS_FS
>> plugins consistent with our motto ``It takes more than a license to
>> make source code open.''
>>
>> - Read<http://www.namesys.com/> to learn more about reiserfs.
>> + Read<https://reiser4.wiki.kernel.org/index.php/Main_Page>
>> + to learn more about reiserfs.
>>
>> Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
>>
>> diff --git a/fs/reiserfs/README b/fs/reiserfs/README
>> index 14e8c9d..e2f7a26 100644
>> --- a/fs/reiserfs/README
>> +++ b/fs/reiserfs/README
>> @@ -43,7 +43,7 @@ to address the fair crediting issue in the next GPL version.)
>> [END LICENSING]
>>
>> Reiserfs is a file system based on balanced tree algorithms, which is
>> -described at http://devlinux.com/namesys.
>> +described at https://reiser4.wiki.kernel.org/index.php/Main_Page
>>
>> Stop reading here. Go there, then return.
>>
>> diff --git a/include/crypto/gf128mul.h b/include/crypto/gf128mul.h
>> index 4086b8e..da2530e 100644
>> --- a/include/crypto/gf128mul.h
>> +++ b/include/crypto/gf128mul.h
>> @@ -54,8 +54,8 @@
>>
>> /* Comment by Rik:
>> *
>> - * For some background on GF(2^128) see for example: http://-
>> - * csrc.nist.gov/CryptoToolkit/modes/proposedmodes/gcm/gcm-revised-spec.pdf
>> + * For some background on GF(2^128) see for example:
>> + * http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-revised-spec.pdf
>> *
>> * The elements of GF(2^128) := GF(2)[X]/(X^128-X^7-X^2-X^1-1) can
>> * be mapped to computer memory in a variety of ways. Let's examine
>> diff --git a/include/linux/fdreg.h b/include/linux/fdreg.h
>> index c2eeb63..61ce641 100644
>> --- a/include/linux/fdreg.h
>> +++ b/include/linux/fdreg.h
>> @@ -89,7 +89,7 @@
>> /* the following commands are new in the 82078. They are not used in the
>> * floppy driver, except the first three. These commands may be useful for apps
>> * which use the FDRAWCMD interface. For doc, get the 82078 spec sheets at
>> - * http://www-techdoc.intel.com/docs/periph/fd_contr/datasheets/ */
>> + * http://www.intel.com/design/archives/periphrl/docs/29046803.htm */
>>
>> #define FD_PARTID 0x18 /* part id ("extended" version cmd) */
>> #define FD_SAVE 0x2e /* save fdc regs for later restore */
>> diff --git a/include/linux/if_infiniband.h b/include/linux/if_infiniband.h
>> index 3e659ec..7d95847 100644
>> --- a/include/linux/if_infiniband.h
>> +++ b/include/linux/if_infiniband.h
>> @@ -5,7 +5,7 @@
>> *<http://www.fsf.org/copyleft/gpl.html>, or the OpenIB.org BSD
>> * license, available in the LICENSE.TXT file accompanying this
>> * software. These details are also available at
>> - *<http://openib.org/license.html>.
>> + *<http://www.openfabrics.org/software_license.htm>.
>> *
>> * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
>> diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h
>> index de24af7..54b8e0d 100644
>> --- a/include/linux/n_r3964.h
>> +++ b/include/linux/n_r3964.h
>> @@ -4,7 +4,6 @@
>> * Copyright by
>> * Philips Automation Projects
>> * Kassel (Germany)
>> - * http://www.pap-philips.de
>> * -----------------------------------------------------------
>> * This software may be used and distributed according to the terms of
>> * the GNU General Public License, incorporated herein by reference.
>> diff --git a/net/ax25/Kconfig b/net/ax25/Kconfig
>> index 2a72aa9..705e53e 100644
>> --- a/net/ax25/Kconfig
>> +++ b/net/ax25/Kconfig
>> @@ -7,7 +7,7 @@ menuconfig HAMRADIO
>> bool "Amateur Radio support"
>> help
>> If you want to connect your Linux box to an amateur radio, answer Y
>> - here. You want to read<http://www.tapr.org/tapr/html/pkthome.html>
>> + here. You want to read<http://www.tapr.org/>
>> and more specifically about AX.25 on Linux
>> <http://www.linux-ax25.org/>.
>>
>> @@ -42,7 +42,7 @@ config AX25
>> check out the file<file:Documentation/networking/ax25.txt> in the
>> kernel source. More information about digital amateur radio in
>> general is on the WWW at
>> - <http://www.tapr.org/tapr/html/pkthome.html>.
>> + <http://www.tapr.org/>.
>>
>> To compile this driver as a module, choose M here: the
>> module will be called ax25.
>> @@ -89,7 +89,7 @@ config NETROM
>> <http://www.linux-ax25.org>. You also might want to check out the
>> file<file:Documentation/networking/ax25.txt>. More information about
>> digital amateur radio in general is on the WWW at
>> - <http://www.tapr.org/tapr/html/pkthome.html>.
>> + <http://www.tapr.org/>.
>>
>> To compile this driver as a module, choose M here: the
>> module will be called netrom.
>> @@ -108,7 +108,7 @@ config ROSE
>> <http://www.linux-ax25.org>. You also might want to check out the
>> file<file:Documentation/networking/ax25.txt>. More information about
>> digital amateur radio in general is on the WWW at
>> - <http://www.tapr.org/tapr/html/pkthome.html>.
>> + <http://www.tapr.org/>.
>>
>> To compile this driver as a module, choose M here: the
>> module will be called rose.
>> diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
>> index 571f895..4123d5b 100644
>> --- a/net/ipv4/Kconfig
>> +++ b/net/ipv4/Kconfig
>> @@ -84,7 +84,7 @@ config IP_FIB_TRIE
>>
>> An experimental study of compression methods for dynamic tries
>> Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
>> - http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
>> + <http://www.csc.kth.se/~snilsson/software/dyntrie2/>
>>
>> endchoice
>>
>> @@ -555,7 +555,7 @@ config TCP_CONG_VENO
>> distinguishing to circumvent the difficult judgment of the packet loss
>> type. TCP Veno cuts down less congestion window in response to random
>> loss packets.
>> - See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
>> + See<http://ieeexplore.ieee.org/xpl/freeabs_all.jsp?arnumber=1177186>
>>
>> config TCP_CONG_YEAH
>> tristate "YeAH TCP"
>> diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
>> index 3a92a76..094e150 100644
>> --- a/net/ipv4/cipso_ipv4.c
>> +++ b/net/ipv4/cipso_ipv4.c
>> @@ -9,7 +9,7 @@
>> *
>> * The CIPSO draft specification can be found in the kernel's Documentation
>> * directory as well as the following URL:
>> - * http://netlabel.sourceforge.net/files/draft-ietf-cipso-ipsecurity-01.txt
>> + * http://tools.ietf.org/id/draft-ietf-cipso-ipsecurity-01.txt
>> * The FIPS-188 specification can be found at the following URL:
>> * http://www.itl.nist.gov/fipspubs/fip188.htm
>> *
>> diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
>> index 4a8e370..d9818c5 100644
>> --- a/net/ipv4/fib_trie.c
>> +++ b/net/ipv4/fib_trie.c
>> @@ -16,7 +16,7 @@
>> *
>> * An experimental study of compression methods for dynamic tries
>> * Stefan Nilsson and Matti Tikkanen. Algorithmica, 33(1):19-33, 2002.
>> - * http://www.nada.kth.se/~snilsson/public/papers/dyntrie2/
>> + * http://www.csc.kth.se/~snilsson/software/dyntrie2/
>> *
>> *
>> * IP-address lookup using LC-tries. Stefan Nilsson and Gunnar Karlsson
>> diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
>> index 1833bdb..d048275 100644
>> --- a/net/ipv4/netfilter/Kconfig
>> +++ b/net/ipv4/netfilter/Kconfig
>> @@ -147,7 +147,7 @@ config IP_NF_TARGET_ULOG
>> which can only be viewed through syslog.
>>
>> The appropriate userspace logging daemon (ulogd) may be obtained from
>> - <http://www.gnumonks.org/projects/ulogd/>
>> + <http://www.netfilter.org/projects/ulogd/index.html>
>>
>> To compile it as a module, choose M here. If unsure, say N.
>>
>> diff --git a/net/ipv4/tcp_illinois.c b/net/ipv4/tcp_illinois.c
>> index 1eba160..00ca688 100644
>> --- a/net/ipv4/tcp_illinois.c
>> +++ b/net/ipv4/tcp_illinois.c
>> @@ -6,7 +6,7 @@
>> * The algorithm is described in:
>> * "TCP-Illinois: A Loss and Delay-Based Congestion Control Algorithm
>> * for High-Speed Networks"
>> - * http://www.ews.uiuc.edu/~shaoliu/papersandslides/liubassri06perf.pdf
>> + * http://www.ifp.illinois.edu/~srikant/Papers/liubassri06perf.pdf
>> *
>> * Implemented from description in paper and ns-2 simulation.
>> * Copyright (C) 2007 Stephen Hemminger<shemminger at linux-foundation.org>
>> diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
>> index e663b78..bccce34 100644
>> --- a/net/ipv4/tcp_input.c
>> +++ b/net/ipv4/tcp_input.c
>> @@ -428,10 +428,10 @@ EXPORT_SYMBOL(tcp_initialize_rcv_mss);
>> *
>> * The algorithm for RTT estimation w/o timestamps is based on
>> * Dynamic Right-Sizing (DRS) by Wu Feng and Mike Fisk of LANL.
>> - *<http://www.lanl.gov/radiant/website/pubs/drs/lacsi2001.ps>
>> + *<http://public.lanl.gov/radiant/pubs.html#DRS>
>> *
>> * More detail on this code can be found at
>> - *<http://www.psc.edu/~jheffner/senior_thesis.ps>,
>> + *<http://staff.psc.edu/jheffner/>,
>> * though this reference is out of date. A new paper
>> * is pending.
>> */
>> diff --git a/net/ipv4/tcp_veno.c b/net/ipv4/tcp_veno.c
>> index b612acf..38bc0b5 100644
>> --- a/net/ipv4/tcp_veno.c
>> +++ b/net/ipv4/tcp_veno.c
>> @@ -6,7 +6,7 @@
>> * "TCP Veno: TCP Enhancement for Transmission over Wireless Access Networks."
>> * IEEE Journal on Selected Areas in Communication,
>> * Feb. 2003.
>> - * See http://www.ntu.edu.sg/home5/ZHOU0022/papers/CPFu03a.pdf
>> + * See http://www.ie.cuhk.edu.hk/fileadmin/staff_upload/soung/Journal/J3.pdf
>> */
>>
>> #include<linux/mm.h>
>> diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
>> index c4c885d..3fb2b73 100644
>> --- a/net/netfilter/nf_conntrack_proto_tcp.c
>> +++ b/net/netfilter/nf_conntrack_proto_tcp.c
>> @@ -329,8 +329,8 @@ static unsigned int get_conntrack_index(const struct tcphdr *tcph)
>> /* TCP connection tracking based on 'Real Stateful TCP Packet Filtering
>> in IP Filter' by Guido van Rooij.
>>
>> - http://www.nluug.nl/events/sane2000/papers.html
>> - http://www.iae.nl/users/guido/papers/tcp_filtering.ps.gz
>> + http://www.sane.nl/events/sane2000/papers.html
>> + http://www.darkart.com/mirrors/www.obfuscation.org/ipf/
>>
>> The boundaries and the conditions are changed according to RFC793:
>> the packet must intersect the window (i.e. segments may be
>> diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c
>> index 456a1b4..854c303 100644
>> --- a/sound/oss/ac97_codec.c
>> +++ b/sound/oss/ac97_codec.c
>> @@ -21,11 +21,8 @@
>> *
>> **************************************************************************
>> *
>> - * The Intel Audio Codec '97 specification is available at the Intel
>> - * audio homepage: http://developer.intel.com/ial/scalableplatforms/audio/
>> - *
>> - * The specification itself is currently available at:
>> - * ftp://download.intel.com/ial/scalableplatforms/ac97r22.pdf
>> + * The Intel Audio Codec '97 specification is available at:
>> + * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf
>> *
>> **************************************************************************
>> *
>> diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
>> index c7fba53..537cfba 100644
>> --- a/sound/pci/ens1370.c
>> +++ b/sound/pci/ens1370.c
>> @@ -22,7 +22,7 @@
>> /* Power-Management-Code ( CONFIG_PM )
>> * for ens1371 only ( FIXME )
>> * derived from cs4281.c, atiixp.c and via82xx.c
>> - * using http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c1540.htm
>> + * using http://www.alsa-project.org/~tiwai/writing-an-alsa-driver/
>> * by Kurt J. Bosch
>> */
>>
>> diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
>> index 4677492..400f9eb 100644
>> --- a/sound/pci/intel8x0.c
>> +++ b/sound/pci/intel8x0.c
>> @@ -716,7 +716,7 @@ static void snd_intel8x0_setup_periods(struct intel8x0 *chip, struct ichdev *ich
>> * Intel 82443MX running a 100MHz processor system bus has a hardware bug,
>> * which aborts PCI busmaster for audio transfer. A workaround is to set
>> * the pages as non-cached. For details, see the errata in
>> - * http://www.intel.com/design/chipsets/specupdt/245051.htm
>> + * http://download.intel.com/design/chipsets/specupdt/24505108.pdf
>> */
>> static void fill_nocache(void *buf, int size, int nocache)
>> {
More information about the Alsa-devel
mailing list