[alsa-devel] [REGRESSION] no sound on T60 laptop (HDA Intel)
Miklos Szeredi
miklos at szeredi.hu
Tue Oct 5 11:25:53 CEST 2010
Hi,
In 2.6.36-rc* sound stopped working on my T60 (HDA Intel). Everything
appears normal except there's no sound.
Dmesg attached.
...
Hmm, it appears sound is back after a suspend/resume. Strange.
Thanks,
Miklos
[ 0.000000] Linux version 2.6.36-rc6-00084-gc6ea21e-dirty (mszeredi at tucsk) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #99 SMP PREEMPT Mon Oct 4 15:37:55 CEST 2010
[ 0.000000] Command line: root=/dev/sda5 vga=0x365
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfedf000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000f6810] f6810
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfed0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfed0000 @ 8000-d000
[ 0.000000] ACPI: RSDP 00000000000f67e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bfed13c7 0008C (v01 LENOVO TP-79 00002190 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfed1500 000F4 (v03 LENOVO TP-79 00002190 LNVO 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20100702/tbfadt-526)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20100702/tbfadt-557)
[ 0.000000] ACPI: DSDT 00000000bfed185e 0D3C2 (v01 LENOVO TP-79 00002190 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000bfef4000 00040
[ 0.000000] ACPI: SSDT 00000000bfed16b4 001AA (v01 LENOVO TP-79 00002190 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 00000000bfedec20 00052 (v01 LENOVO TP-79 00002190 LNVO 00000001)
[ 0.000000] ACPI: TCPA 00000000bfedec72 00032 (v02 LENOVO TP-79 00002190 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bfedeca4 00068 (v01 LENOVO TP-79 00002190 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bfeded0c 0003C (v01 LENOVO TP-79 00002190 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bfeded48 00038 (v01 LENOVO TP-79 00002190 LNVO 00000001)
[ 0.000000] ACPI: SLIC 00000000bfedee62 00176 (v01 LENOVO TP-79 00002190 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfedefd8 00028 (v01 LENOVO TP-79 00002190 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfef2655 0025F (v01 LENOVO TP-79 00002190 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bfef28b4 000A6 (v01 LENOVO TP-79 00002190 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bfef295a 004F7 (v01 LENOVO TP-79 00002190 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bfef2e51 001D8 (v01 LENOVO TP-79 00002190 INTL 20050513)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfed0
[ 0.000000] On node 0 totalpages: 786030
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3942 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10692 pages used for memmap
[ 0.000000] DMA32 zone: 771340 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [7000 - 77ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880002600000 s79424 r8192 d22976 u1048576
[ 0.000000] pcpu-alloc: s79424 r8192 d22976 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775282
[ 0.000000] Kernel command line: root=/dev/sda5 vga=0x365
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (49 early reservations)
[ 0.000000] #1 [0001000000 - 0002487c98] TEXT DATA BSS
[ 0.000000] #2 [0002488000 - 000248814c] BRK
[ 0.000000] #3 [00000f6820 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000f6810 - 00000f6820] MP-table mpf
[ 0.000000] #5 [000009f000 - 000009f5a1] BIOS reserved
[ 0.000000] #6 [000009f6bd - 00000f6810] BIOS reserved
[ 0.000000] #7 [000009f5a1 - 000009f6bd] MP-table mpc
[ 0.000000] #8 [0000001000 - 0000003000] TRAMPOLINE
[ 0.000000] #9 [0000003000 - 0000007000] ACPI WAKEUP
[ 0.000000] #10 [0000008000 - 000000b000] PGTABLE
[ 0.000000] #11 [0002488180 - 0002489180] BOOTMEM
[ 0.000000] #12 [0002487cc0 - 0002487f00] BOOTMEM
[ 0.000000] #13 [0002c8a000 - 000568a000] BOOTMEM
[ 0.000000] #14 [0002489180 - 0002489580] BOOTMEM
[ 0.000000] #15 [0002489580 - 00024c9580] BOOTMEM
[ 0.000000] #16 [00024ca000 - 00024cb000] BOOTMEM
[ 0.000000] #17 [0002487f00 - 0002487f41] BOOTMEM
[ 0.000000] #18 [0002487f80 - 0002487fc3] BOOTMEM
[ 0.000000] #19 [00024c9580 - 00024c9900] BOOTMEM
[ 0.000000] #20 [00024c9900 - 00024c9968] BOOTMEM
[ 0.000000] #21 [00024c9980 - 00024c99e8] BOOTMEM
[ 0.000000] #22 [00024c9a00 - 00024c9a68] BOOTMEM
[ 0.000000] #23 [00024c9a80 - 00024c9ae8] BOOTMEM
[ 0.000000] #24 [00024c9b00 - 00024c9b68] BOOTMEM
[ 0.000000] #25 [00024c9b80 - 00024c9be8] BOOTMEM
[ 0.000000] #26 [00024c9c00 - 00024c9c68] BOOTMEM
[ 0.000000] #27 [00024c9c80 - 00024c9ce8] BOOTMEM
[ 0.000000] #28 [00024c9d00 - 00024c9d68] BOOTMEM
[ 0.000000] #29 [00024c9d80 - 00024c9de8] BOOTMEM
[ 0.000000] #30 [00024c9e00 - 00024c9e68] BOOTMEM
[ 0.000000] #31 [00024c9e80 - 00024c9ee8] BOOTMEM
[ 0.000000] #32 [00024c9f00 - 00024c9f68] BOOTMEM
[ 0.000000] #33 [00024c9f80 - 00024c9fe8] BOOTMEM
[ 0.000000] #34 [00024cb000 - 00024cb068] BOOTMEM
[ 0.000000] #35 [00024cb080 - 00024cb099] BOOTMEM
[ 0.000000] #36 [00024cb0c0 - 00024cb0d9] BOOTMEM
[ 0.000000] #37 [0002600000 - 000261b000] BOOTMEM
[ 0.000000] #38 [0002700000 - 000271b000] BOOTMEM
[ 0.000000] #39 [00024cd100 - 00024cd108] BOOTMEM
[ 0.000000] #40 [00024cd140 - 00024cd148] BOOTMEM
[ 0.000000] #41 [00024cd180 - 00024cd188] BOOTMEM
[ 0.000000] #42 [00024cd1c0 - 00024cd1d0] BOOTMEM
[ 0.000000] #43 [00024cd200 - 00024cd340] BOOTMEM
[ 0.000000] #44 [00024cd340 - 00024cd3a0] BOOTMEM
[ 0.000000] #45 [00024cd3c0 - 00024cd420] BOOTMEM
[ 0.000000] #46 [00024cd440 - 00024d5440] BOOTMEM
[ 0.000000] #47 [000271b000 - 0002b1b000] BOOTMEM
[ 0.000000] #48 [000568a000 - 000588a000] BOOTMEM
[ 0.000000] Memory: 3073384k/3144512k available (4414k kernel code, 392k absent, 70736k reserved, 6410k data, 416k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:320
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 5855 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1828.655 MHz processor.
[ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.31 BogoMIPS (lpj=7314620)
[ 0.004030] pid_max: default: 32768 minimum: 301
[ 0.004207] Mount-cache hash table entries: 256
[ 0.008071] CPU: Physical Processor ID: 0
[ 0.008077] CPU: Processor Core ID: 0
[ 0.008084] mce: CPU supports 6 MCE banks
[ 0.008097] CPU0: Thermal monitoring enabled (TM2)
[ 0.008105] using mwait in idle threads.
[ 0.008111] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.008125] PEBS disabled due to CPU errata.
[ 0.008140] ... version: 2
[ 0.008146] ... bit width: 40
[ 0.008151] ... generic registers: 2
[ 0.008157] ... value mask: 000000ffffffffff
[ 0.008163] ... max period: 000000007fffffff
[ 0.008170] ... fixed-purpose events: 3
[ 0.008175] ... event mask: 0000000700000003
[ 0.008294] ACPI: Core revision 20100702
[ 0.040194] Setting APIC routing to flat
[ 0.040618] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.082618] CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06
[ 0.092044] lockdep: fixing up alternatives.
[ 0.096167] Booting Node 0, Processors #1 Ok.
[ 0.188000] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.188000] Measured 566005 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.188000] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.188067] Brought up 2 CPUs
[ 0.188075] Total of 2 processors activated (7314.85 BogoMIPS).
[ 0.188685] NET: Registered protocol family 16
[ 0.188685] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.188685] ACPI: bus type pci registered
[ 0.192021] PCI: Using configuration type 1 for base access
[ 0.204511] bio: create slab <bio-0> at 0
[ 0.215676] ACPI: EC: EC description table is found, configuring boot EC
[ 0.244526] ACPI: SSDT 00000000bfef1d36 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.246996] ACPI: Dynamic OEM Table Load:
[ 0.247005] ACPI: SSDT (null) 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.247441] ACPI: SSDT 00000000bfef1ffb 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.249988] ACPI: Dynamic OEM Table Load:
[ 0.249997] ACPI: SSDT (null) 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.250553] ACPI: SSDT 00000000bfef1c6e 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.253061] ACPI: Dynamic OEM Table Load:
[ 0.253070] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.253291] ACPI: SSDT 00000000bfef1f76 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.255719] ACPI: Dynamic OEM Table Load:
[ 0.255727] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.255798] ACPI: Interpreter enabled
[ 0.255805] ACPI: (supports S0 S3 S5)
[ 0.255861] ACPI: Using IOAPIC for interrupt routing
[ 0.276490] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.276579] ACPI: Power Resource [PUBS] (on)
[ 0.280875] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.280886] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.281720] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.281966] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.281966] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
[ 0.281966] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed40fff] (ignored)
[ 0.281966] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.281966] pci 0000:00:01.0: PME# disabled
[ 0.281966] pci 0000:00:1b.0: reg 10: [mem 0xee400000-0xee403fff 64bit]
[ 0.281966] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.281966] pci 0000:00:1b.0: PME# disabled
[ 0.281966] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.281966] pci 0000:00:1c.0: PME# disabled
[ 0.281966] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.281966] pci 0000:00:1c.1: PME# disabled
[ 0.281966] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.281966] pci 0000:00:1c.2: PME# disabled
[ 0.281966] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.281966] pci 0000:00:1c.3: PME# disabled
[ 0.281966] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f]
[ 0.281966] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f]
[ 0.281966] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f]
[ 0.281966] pci 0000:00:1d.3: reg 20: [io 0x1860-0x187f]
[ 0.281998] pci 0000:00:1d.7: reg 10: [mem 0xee404000-0xee4043ff]
[ 0.284116] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.284124] pci 0000:00:1d.7: PME# disabled
[ 0.284435] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.284449] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.284461] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.284473] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.284486] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.284576] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.284593] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.284611] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.284628] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.284646] pci 0000:00:1f.1: reg 20: [io 0x1880-0x188f]
[ 0.284764] pci 0000:00:1f.2: reg 10: [io 0x18c8-0x18cf]
[ 0.284782] pci 0000:00:1f.2: reg 14: [io 0x18ac-0x18af]
[ 0.284799] pci 0000:00:1f.2: reg 18: [io 0x18c0-0x18c7]
[ 0.284817] pci 0000:00:1f.2: reg 1c: [io 0x18a8-0x18ab]
[ 0.284834] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.284852] pci 0000:00:1f.2: reg 24: [mem 0xee404400-0xee4047ff]
[ 0.284914] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.284921] pci 0000:00:1f.2: PME# disabled
[ 0.285052] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
[ 0.285287] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
[ 0.285330] pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff]
[ 0.285372] pci 0000:01:00.0: reg 18: [mem 0xee100000-0xee10ffff]
[ 0.285537] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.285650] pci 0000:01:00.0: supports D1 D2
[ 0.285704] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.285717] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.285727] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.285733] pci 0000:00:01.0: bridge window [mem 0xee100000-0xee1fffff]
[ 0.285741] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.285966] pci 0000:02:00.0: reg 10: [mem 0xee000000-0xee01ffff]
[ 0.286017] pci 0000:02:00.0: reg 18: [io 0x3000-0x301f]
[ 0.286194] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.286204] pci 0000:02:00.0: PME# disabled
[ 0.286239] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.286251] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.286263] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.286270] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
[ 0.286282] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.286535] pci 0000:03:00.0: reg 10: [mem 0xedf00000-0xedf00fff]
[ 0.286918] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.286933] pci 0000:03:00.0: PME# disabled
[ 0.286990] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.287003] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.287014] pci 0000:00:1c.1: bridge window [io 0x4000-0x5fff]
[ 0.287021] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
[ 0.287033] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.287123] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.287135] pci 0000:00:1c.2: bridge window [io 0x6000-0x7fff]
[ 0.287143] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.287154] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.287243] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
[ 0.287255] pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff]
[ 0.287262] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
[ 0.287274] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.287382] pci 0000:15:00.0: reg 10: [mem 0xe4300000-0xe4300fff]
[ 0.287425] pci 0000:15:00.0: supports D1 D2
[ 0.287428] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.287437] pci 0000:15:00.0: PME# disabled
[ 0.287541] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.287554] pci 0000:00:1e.0: bridge window [io 0xa000-0xdfff]
[ 0.287562] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
[ 0.287573] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.287578] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.287581] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
[ 0.287711] pci_bus 0000:00: on NUMA node 0
[ 0.287717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.288235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.288329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.288424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.288514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.288621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.288727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.304239] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.304457] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.304668] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.304878] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.305087] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.305297] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.305506] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.305716] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.305827] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.305827] vgaarb: loaded
[ 0.305827] SCSI subsystem initialized
[ 0.305827] libata version 3.00 loaded.
[ 0.305827] usbcore: registered new interface driver usbfs
[ 0.305827] usbcore: registered new interface driver hub
[ 0.305827] usbcore: registered new device driver usb
[ 0.305827] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.305827] PCI: Using ACPI for IRQ routing
[ 0.305827] PCI: pci_cache_line_size set to 64 bytes
[ 0.308219] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.308233] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
[ 0.308310] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.308310] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.308310] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.320055] Switching to clocksource hpet
[ 0.328359] pnp: PnP ACPI init
[ 0.328420] ACPI: bus type pnp registered
[ 0.333541] pnp: PnP ACPI: found 12 devices
[ 0.333549] ACPI: ACPI bus type pnp unregistered
[ 0.333585] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.333596] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved
[ 0.333606] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved
[ 0.333615] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.333624] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.333635] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.333645] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.333655] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.333666] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.333676] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.333686] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.333696] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.333706] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.333717] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.333727] system 00:00: [mem 0xfed41000-0xffffffff] could not be reserved
[ 0.333750] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.333760] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.333768] system 00:02: [io 0x1180-0x11bf] has been reserved
[ 0.333777] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.333786] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.333795] system 00:02: [io 0x1600-0x165f] could not be reserved
[ 0.333805] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.333814] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.333824] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.333833] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.333843] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.347759] pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.347774] pci 0000:01:00.0: BAR 6: assigned [mem 0xee120000-0xee13ffff pref]
[ 0.347784] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.347793] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.347805] pci 0000:00:01.0: bridge window [mem 0xee100000-0xee1fffff]
[ 0.347816] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.347830] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.347839] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.347853] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
[ 0.347865] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.347883] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.347892] pci 0000:00:1c.1: bridge window [io 0x4000-0x5fff]
[ 0.347906] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
[ 0.347918] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.347935] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.347944] pci 0000:00:1c.2: bridge window [io 0x6000-0x7fff]
[ 0.347958] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.347970] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.347987] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
[ 0.348015] pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff]
[ 0.348029] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
[ 0.348041] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.348060] pci 0000:15:00.0: BAR 9: assigned [mem 0xe0000000-0xe3ffffff pref]
[ 0.348071] pci 0000:15:00.0: BAR 10: assigned [mem 0xc4000000-0xc7ffffff]
[ 0.348080] pci 0000:15:00.0: BAR 7: assigned [io 0xa000-0xa0ff]
[ 0.348089] pci 0000:15:00.0: BAR 8: assigned [io 0xa400-0xa4ff]
[ 0.348097] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.348104] pci 0000:15:00.0: bridge window [io 0xa000-0xa0ff]
[ 0.348116] pci 0000:15:00.0: bridge window [io 0xa400-0xa4ff]
[ 0.348129] pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref]
[ 0.348143] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
[ 0.348156] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.348165] pci 0000:00:1e.0: bridge window [io 0xa000-0xdfff]
[ 0.348179] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
[ 0.348191] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.348230] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.348242] pci 0000:00:01.0: setting latency timer to 64
[ 0.348261] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.348273] pci 0000:00:1c.0: setting latency timer to 64
[ 0.348291] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.348304] pci 0000:00:1c.1: setting latency timer to 64
[ 0.348322] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.348334] pci 0000:00:1c.2: setting latency timer to 64
[ 0.348354] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.348365] pci 0000:00:1c.3: setting latency timer to 64
[ 0.348375] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 0.348389] pci 0000:00:1e.0: setting latency timer to 64
[ 0.348409] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.348424] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.348427] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.348431] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.348434] pci_bus 0000:01: resource 1 [mem 0xee100000-0xee1fffff]
[ 0.348437] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.348441] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.348444] pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff]
[ 0.348447] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.348450] pci_bus 0000:03: resource 0 [io 0x4000-0x5fff]
[ 0.348453] pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff]
[ 0.348457] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.348460] pci_bus 0000:04: resource 0 [io 0x6000-0x7fff]
[ 0.348463] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff]
[ 0.348466] pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.348470] pci_bus 0000:0c: resource 0 [io 0x8000-0x9fff]
[ 0.348473] pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff]
[ 0.348476] pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.348479] pci_bus 0000:15: resource 0 [io 0xa000-0xdfff]
[ 0.348482] pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff]
[ 0.348486] pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.348489] pci_bus 0000:15: resource 4 [io 0x0000-0xffff]
[ 0.348492] pci_bus 0000:15: resource 5 [mem 0x00000000-0xffffffffffffffff]
[ 0.348495] pci_bus 0000:16: resource 0 [io 0xa000-0xa0ff]
[ 0.348498] pci_bus 0000:16: resource 1 [io 0xa400-0xa4ff]
[ 0.348501] pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref]
[ 0.348505] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
[ 0.348654] NET: Registered protocol family 2
[ 0.348929] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.350072] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.353332] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
[ 0.360158] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.360239] TCP reno registered
[ 0.360256] UDP hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.360679] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.361328] NET: Registered protocol family 1
[ 0.361415] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.361418] pci 0000:00:1d.0: Performing full reset
[ 0.361444] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.361447] pci 0000:00:1d.1: Performing full reset
[ 0.361471] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.361473] pci 0000:00:1d.2: Performing full reset
[ 0.361499] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
[ 0.361501] pci 0000:00:1d.3: Performing full reset
[ 0.361599] pci 0000:01:00.0: Boot video device
[ 0.361731] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.362103] Simple Boot Flag at 0x35 set to 0x1
[ 0.364937] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.365847] msgmni has been set to 6002
[ 0.366403] io scheduler noop registered
[ 0.366443] io scheduler cfq registered (default)
[ 0.368272] pcieport 0000:00:01.0: ACPI _OSC control granted for 0x1d
[ 0.368292] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.368374] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.368575] pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1d
[ 0.368601] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.368679] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.369001] pcieport 0000:00:1c.1: ACPI _OSC control granted for 0x1d
[ 0.369026] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.369104] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.369420] pcieport 0000:00:1c.2: ACPI _OSC control granted for 0x1d
[ 0.369446] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.369523] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.369842] pcieport 0000:00:1c.3: ACPI _OSC control granted for 0x1d
[ 0.369868] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.369945] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 0.370530] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.370541] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.370552] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.370605] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.370614] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.370627] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.370682] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.370691] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.370704] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.370756] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.370769] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.370821] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.370835] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.372874] vesafb: framebuffer at 0xd8000000, mapped to 0xffffc90000080000, using 5120k, total 16384k
[ 0.372886] vesafb: mode is 1280x1024x16, linelength=2560, pages=5
[ 0.372894] vesafb: scrolling: redraw
[ 0.372900] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.413823] Console: switching to colour frame buffer device 160x64
[ 0.454307] fb0: VESA VGA frame buffer device
[ 0.454607] intel_idle: MWAIT substates: 0x22220
[ 0.454610] intel_idle: does not run on family 6 model 15
[ 0.455057] input: Lid Switch as /class/input/input0
[ 0.455547] ACPI: Lid Switch [LID]
[ 0.455918] input: Sleep Button as /class/input/input1
[ 0.456231] ACPI: Sleep Button [SLPB]
[ 0.456634] input: Power Button as /class/input/input2
[ 0.456879] ACPI: Power Button [PWRF]
[ 0.461405] acpi device:05: registered as cooling_device0
[ 0.462190] input: Video Bus as /class/input/input3
[ 0.462426] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 0.525617] Real Time Clock Driver v1.12b
[ 0.526298] Non-volatile memory driver v1.3
[ 0.526497] Linux agpgart interface v0.103
[ 0.527387] [drm] Initialized drm 1.1.0 20060810
[ 0.527764] [drm] radeon defaulting to userspace modesetting.
[ 0.529949] pci 0000:01:00.0: power state changed by ACPI to D0
[ 0.530248] pci 0000:01:00.0: power state changed by ACPI to D0
[ 0.530542] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.530871] pci 0000:01:00.0: setting latency timer to 64
[ 0.531580] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[ 0.533992] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[ 0.534340] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.538756] loop: module loaded
[ 0.538913] Uniform Multi-Platform E-IDE driver
[ 0.539371] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
[ 0.539689] pci 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 0.540028] piix 0000:00:1f.1: IDE port disabled
[ 0.540294] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 0.540618] ide0: BM-DMA at 0x1880-0x1887
[ 0.540829] Probing IDE interface ide0...
[ 1.276360] hda: MATSHITADVD-RAM UJ-842, ATAPI CD/DVD-ROM drive
[ 1.612208] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 1.612522] hda: UDMA/33 mode selected
[ 1.613035] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.616430] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 1.616881] ide-gd driver 1.18
[ 1.617134] ide-cd driver 5.00
[ 1.618479] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 1.618904] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.629496] ahci 0000:00:1f.2: version 3.0
[ 1.629519] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.629910] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.630026] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.630411] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.643039] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.643289] scsi0 : ahci
[ 1.656271] scsi1 : ahci
[ 1.668834] scsi2 : ahci
[ 1.681187] scsi3 : ahci
[ 1.693565] ata1: SATA max UDMA/133 abar m1024 at 0xee404400 port 0xee404500 irq 45
[ 1.705958] ata2: DUMMY
[ 1.718134] ata3: DUMMY
[ 1.730318] ata4: DUMMY
[ 1.742932] tun: Universal TUN/TAP device driver, 1.6
[ 1.755402] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 1.768621] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.781398] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 1.781639] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.794562] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.807150] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.819748] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.819754] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.832707] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.845177] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[ 1.845183] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[ 1.845237] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.857613] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.870022] ehci_hcd 0000:00:1d.7: reset command 0080022 (park)=0 ithresh=8 Async period=1024 Reset HALT
[ 1.873906] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.873908] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 1.873952] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000
[ 1.886269] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.890165] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.900040] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.912441] usb usb1: default language 0x0409
[ 1.912462] usb usb1: udev 1, busnum 1, minor = 0
[ 1.912466] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.924646] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.936838] usb usb1: Product: EHCI Host Controller
[ 1.949005] usb usb1: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty ehci_hcd
[ 1.961312] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.973878] usb usb1: usb_probe_device
[ 1.973882] usb usb1: configuration #1 chosen from 1 choice
[ 1.974023] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.974284] hub 1-0:1.0: usb_probe_interface
[ 1.974287] hub 1-0:1.0: usb_probe_interface - got id
[ 1.974295] hub 1-0:1.0: USB hub found
[ 1.986464] hub 1-0:1.0: 8 ports detected
[ 1.998516] hub 1-0:1.0: standalone hub
[ 1.998519] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.998521] hub 1-0:1.0: individual port over-current protection
[ 1.998525] hub 1-0:1.0: power on to power good time: 20ms
[ 1.998636] hub 1-0:1.0: local power source is good
[ 1.998640] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.999251] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.011721] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 2.024172] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 2.036276] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.048405] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.048411] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.060620] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.064041] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.084887] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.096951] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.096956] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.097065] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001403 0 ACK POWER sig=k CSC CONNECT
[ 2.097073] hub 1-0:1.0: port 2: status 0501 change 0001
[ 2.097141] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 2.097148] hub 1-0:1.0: port 7: status 0501 change 0001
[ 2.097163] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 2.097169] hub 1-0:1.0: port 8: status 0501 change 0001
[ 2.097195] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.097197] uhci_hcd 0000:00:1d.0: Performing full reset
[ 2.097215] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 2.097252] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
[ 2.097359] usb usb2: default language 0x0409
[ 2.097379] usb usb2: udev 1, busnum 2, minor = 128
[ 2.097381] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.097384] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.097387] usb usb2: Product: UHCI Host Controller
[ 2.097389] usb usb2: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty uhci_hcd
[ 2.097391] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.184327] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.197132] usb usb2: usb_probe_device
[ 2.197137] usb usb2: configuration #1 chosen from 1 choice
[ 2.197155] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 2.197315] hub 2-0:1.0: usb_probe_interface
[ 2.197318] hub 2-0:1.0: usb_probe_interface - got id
[ 2.197325] hub 2-0:1.0: USB hub found
[ 2.209950] ata1.00: ATA-7: INTEL SSDSA2M080G2GN, 2CV102HA, max UDMA/133
[ 2.210013] hub 2-0:1.0: 2 ports detected
[ 2.210016] hub 2-0:1.0: standalone hub
[ 2.210018] hub 2-0:1.0: no power switching (usb 1.0)
[ 2.210020] hub 2-0:1.0: individual port over-current protection
[ 2.210022] hub 2-0:1.0: power on to power good time: 2ms
[ 2.210052] hub 2-0:1.0: local power source is good
[ 2.210055] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 2.210333] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 2.210389] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.210407] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.210411] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.210593] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.210604] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.210611] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.210613] uhci_hcd 0000:00:1d.1: Performing full reset
[ 2.210630] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 2.210663] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
[ 2.210739] usb usb3: default language 0x0409
[ 2.210758] usb usb3: udev 1, busnum 3, minor = 256
[ 2.210761] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.210764] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.210766] usb usb3: Product: UHCI Host Controller
[ 2.210768] usb usb3: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty uhci_hcd
[ 2.210771] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.210974] usb usb3: usb_probe_device
[ 2.210977] usb usb3: configuration #1 chosen from 1 choice
[ 2.210994] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 2.211132] hub 3-0:1.0: usb_probe_interface
[ 2.211135] hub 3-0:1.0: usb_probe_interface - got id
[ 2.211140] hub 3-0:1.0: USB hub found
[ 2.211158] hub 3-0:1.0: 2 ports detected
[ 2.211161] hub 3-0:1.0: standalone hub
[ 2.211163] hub 3-0:1.0: no power switching (usb 1.0)
[ 2.211165] hub 3-0:1.0: individual port over-current protection
[ 2.211167] hub 3-0:1.0: power on to power good time: 2ms
[ 2.211183] hub 3-0:1.0: local power source is good
[ 2.211185] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 2.211453] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 2.211597] hub 1-0:1.0: state 7 ports 8 chg 0184 evt 0000
[ 2.211652] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 2.211753] ehci_hcd 0000:00:1d.7: port 2 low speed --> companion
[ 2.211886] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 2.212079] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 2.212091] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.212102] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.212106] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.212284] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.212298] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.212305] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.212307] uhci_hcd 0000:00:1d.2: Performing full reset
[ 2.212325] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 2.212359] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 2.212434] usb usb4: default language 0x0409
[ 2.212454] usb usb4: udev 1, busnum 4, minor = 384
[ 2.212457] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.212460] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.212462] usb usb4: Product: UHCI Host Controller
[ 2.212464] usb usb4: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty uhci_hcd
[ 2.212467] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.212680] usb usb4: usb_probe_device
[ 2.212684] usb usb4: configuration #1 chosen from 1 choice
[ 2.212701] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 2.212845] hub 4-0:1.0: usb_probe_interface
[ 2.212847] hub 4-0:1.0: usb_probe_interface - got id
[ 2.212852] hub 4-0:1.0: USB hub found
[ 2.212864] hub 4-0:1.0: 2 ports detected
[ 2.212866] hub 4-0:1.0: standalone hub
[ 2.212868] hub 4-0:1.0: no power switching (usb 1.0)
[ 2.212870] hub 4-0:1.0: individual port over-current protection
[ 2.212872] hub 4-0:1.0: power on to power good time: 2ms
[ 2.212887] hub 4-0:1.0: local power source is good
[ 2.212890] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 2.213166] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 2.213216] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.213227] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.213231] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.213419] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.213433] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 2.213440] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.213442] uhci_hcd 0000:00:1d.3: Performing full reset
[ 2.213467] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
[ 2.213544] usb usb5: default language 0x0409
[ 2.213564] usb usb5: udev 1, busnum 5, minor = 512
[ 2.213567] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.213569] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.213572] usb usb5: Product: UHCI Host Controller
[ 2.213574] usb usb5: Manufacturer: Linux 2.6.36-rc6-00084-gc6ea21e-dirty uhci_hcd
[ 2.213576] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.213791] usb usb5: usb_probe_device
[ 2.213794] usb usb5: configuration #1 chosen from 1 choice
[ 2.213811] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 2.213950] hub 5-0:1.0: usb_probe_interface
[ 2.213953] hub 5-0:1.0: usb_probe_interface - got id
[ 2.213958] hub 5-0:1.0: USB hub found
[ 2.213969] hub 5-0:1.0: 2 ports detected
[ 2.213972] hub 5-0:1.0: standalone hub
[ 2.213973] hub 5-0:1.0: no power switching (usb 1.0)
[ 2.213975] hub 5-0:1.0: individual port over-current protection
[ 2.213978] hub 5-0:1.0: power on to power good time: 2ms
[ 2.213992] hub 5-0:1.0: local power source is good
[ 2.213995] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 2.214276] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3
[ 2.214644] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 2.222775] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.223011] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.223411] mice: PS/2 mouse device common for all mice
[ 2.225003] coretemp coretemp.0: TjMax is assumed as 100 C!
[ 2.771584] coretemp coretemp.1: TjMax is assumed as 100 C!
[ 2.771855] cpuidle: using governor ladder
[ 2.771858] cpuidle: using governor menu
[ 2.772246] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 2.772348] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
[ 2.772392] uhci_hcd 0000:00:1d.0: port 2 portsc 01ab,00
[ 2.772399] hub 2-0:1.0: port 2: status 0301 change 0003
[ 2.772482] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00
[ 2.772509] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
[ 2.775109] input: AT Translated Set 2 keyboard as /class/input/input4
[ 2.776017] usbcore: registered new interface driver usbhid
[ 2.776019] usbhid: USB HID core driver
[ 2.776551] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.776558] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[ 2.776647] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 2.776710] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 2.776767] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.777270] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.777274] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.777278] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.777510] ata1.00: configured for UDMA/133
[ 2.788627] ata1.00: configured for UDMA/133
[ 2.788632] ata1: EH complete
[ 2.789162] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 2.790257] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.790392] sd 0:0:0:0: [sda] Write Protect is off
[ 2.790395] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.790451] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.791974] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.792071] sda: sda1 sda2 sda3 < sda5 >
[ 2.923690] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.924317] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
[ 2.924324] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003801 0 ACK POWER OWNER sig=j CONNECT
[ 2.924332] hub 1-0:1.0: port 7 not reset yet, waiting 50ms
[ 3.024146] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 3.024195] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
[ 3.041754] ALSA device list:
[ 3.053626] #0: HDA Intel at 0xee400000 irq 46
[ 3.065542] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.076189] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
[ 3.076195] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0 ACK POWER OWNER sig=j CONNECT
[ 3.076202] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
[ 3.079218] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.091458] TCP cubic registered
[ 3.103388] NET: Registered protocol family 17
[ 3.132035] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 3.132079] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
[ 3.132127] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.132140] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.132151] hub 2-0:1.0: state 7 ports 2 chg 0004 evt 0000
[ 3.132172] hub 2-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[ 3.244029] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 3.376023] usb usb3: suspend_rh (auto-stop)
[ 3.376050] usb usb4: suspend_rh (auto-stop)
[ 3.410352] usb 2-2: skipped 1 descriptor after interface
[ 3.415344] usb 2-2: default language 0x0409
[ 3.432348] usb 2-2: udev 2, busnum 2, minor = 129
[ 3.432351] usb 2-2: New USB device found, idVendor=045e, idProduct=0084
[ 3.444420] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.456484] usb 2-2: Product: Basic Optical Mouse
[ 3.468498] usb 2-2: Manufacturer: Microsoft
[ 3.480835] usb 2-2: usb_probe_device
[ 3.480840] usb 2-2: configuration #1 chosen from 1 choice
[ 3.483359] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[ 3.483512] usbhid 2-2:1.0: usb_probe_interface
[ 3.483516] usbhid 2-2:1.0: usb_probe_interface - got id
[ 3.496818] input: Microsoft Basic Optical Mouse as /class/input/input5
[ 3.509928] generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 3.523142] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0006
[ 3.523156] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00
[ 3.523171] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 3.632729] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0
[ 3.645810] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.658990] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[ 3.700760] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[ 3.718334] EXT3-fs (sda5): error: couldn't mount because of unsupported optional features (240)
[ 3.735286] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 3.749065] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[ 3.763242] Freeing unused kernel memory: 416k freed
[ 3.768038] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 3.790652] Write protecting the kernel read-only data: 10240k
[ 3.805307] Freeing unused kernel memory: 1708k freed
[ 3.820378] Freeing unused kernel memory: 1944k freed
[ 3.943551] usb 5-1: skipped 1 descriptor after interface
[ 3.948534] usb 5-1: default language 0x0409
[ 3.958546] usb 5-1: udev 2, busnum 5, minor = 513
[ 3.958550] usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
[ 3.972456] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.986517] usb 5-1: Product: BCM2045B
[ 4.000587] usb 5-1: Manufacturer: Broadcom Corp
[ 4.015103] usb 5-1: usb_probe_device
[ 4.015109] usb 5-1: configuration #1 chosen from 1 choice
[ 4.017566] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
[ 4.017909] usb 5-1: adding 5-1:1.1 (config #1, interface 1)
[ 4.018153] usb 5-1: adding 5-1:1.2 (config #1, interface 2)
[ 4.018363] usb 5-1: adding 5-1:1.3 (config #1, interface 3)
[ 4.018755] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
[ 4.018771] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
[ 4.144046] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
[ 4.256042] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 4.388040] usb 5-2: ep0 maxpacket = 8
[ 4.411530] usb 5-2: default language 0x0409
[ 4.430536] usb 5-2: udev 3, busnum 5, minor = 514
[ 4.430540] usb 5-2: New USB device found, idVendor=0483, idProduct=2016
[ 4.445937] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.460979] usb 5-2: Product: Biometric Coprocessor
[ 4.476073] usb 5-2: Manufacturer: STMicroelectronics
[ 4.491456] usb 5-2: usb_probe_device
[ 4.491460] usb 5-2: configuration #1 chosen from 1 choice
[ 4.493540] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
[ 4.494230] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 5.808208] hub 1-0:1.0: hub_suspend
[ 5.808297] usb usb1: bus auto-suspend
[ 5.808301] ehci_hcd 0000:00:1d.7: suspend root hub
[ 5.808417] hub 3-0:1.0: hub_suspend
[ 5.808425] usb usb3: bus auto-suspend
[ 5.808437] usb usb3: suspend_rh
[ 5.808461] hub 4-0:1.0: hub_suspend
[ 5.808469] usb usb4: bus auto-suspend
[ 5.808472] usb usb4: suspend_rh
[ 9.426310] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 9.679115] input: TPPS/2 IBM TrackPoint as /class/input/input7
[ 20.584555] udev: starting version 146
[ 20.584557] <3>udev: missing sysfs features; please update the kernel or disable the kernel's CONFIG_SYSFS_DEPRECATED option; udev may fail to work correctly
[ 20.616606] udevd (1267): /proc/1267/oom_adj is deprecated, please use /proc/1267/oom_score_adj instead.
[ 21.179313] ACPI: acpi_idle registered with cpuidle
[ 21.252765] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
[ 21.277359] ACPI: AC Adapter [AC] (on-line)
[ 21.277756] e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
[ 21.277816] e1000e 0000:02:00.0: Disabling ASPM L1
[ 21.277844] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.277862] e1000e 0000:02:00.0: setting latency timer to 64
[ 21.278131] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X
[ 21.278523] e1000e 0000:02:00.0: Disabling ASPM L0s
[ 21.368477] Monitor-Mwait will be used to enter C-1 state
[ 21.372121] Monitor-Mwait will be used to enter C-2 state
[ 21.376132] Monitor-Mwait will be used to enter C-3 state
[ 21.392885] ACPI: Battery Slot [BAT0] (battery present)
[ 21.394781] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:41:e3:2c:76
[ 21.394785] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 21.394924] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
[ 21.463448] thermal LNXTHERM:01: registered as thermal_zone0
[ 21.481781] cfg80211: Calling CRDA to update world regulatory domain
[ 21.505004] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 21.506107] ACPI: Thermal Zone [THM0] (59 C)
[ 21.507768] thermal LNXTHERM:02: registered as thermal_zone1
[ 21.507792] ACPI: Thermal Zone [THM1] (66 C)
[ 21.511001] irda_init()
[ 21.511111] NET: Registered protocol family 23
[ 21.593724] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 21.613694] thinkpad_acpi: ThinkPad BIOS 79ETD9WW (2.19 ), EC 79HT50WW-1.07
[ 21.634604] Bluetooth: Core ver 2.15
[ 21.635518] thinkpad_acpi: Lenovo ThinkPad T60, model 2007FUG
[ 21.635521] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
[ 21.635523] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
[ 21.638617] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 21.638845] thinkpad_acpi: radio switch found; radios are enabled
[ 21.646954] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it
[ 21.646957] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
[ 21.657172] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 21.659680] Registered led device: tpacpi::thinklight
[ 21.660203] Registered led device: tpacpi::power
[ 21.660883] Registered led device: tpacpi::standby
[ 21.661265] Registered led device: tpacpi::thinkvantage
[ 21.664102] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 21.665786] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 21.672486] input: ThinkPad Extra Buttons as /class/input/input8
[ 21.772560] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 21.772563] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 21.772782] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 21.772799] iwl3945 0000:03:00.0: setting latency timer to 64
[ 21.826605] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 21.826609] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 21.826804] iwl3945 0000:03:00.0: irq 48 for MSI/MSI-X
[ 21.833238] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 21.847961] nsc-ircc 00:0a: activated
[ 21.847966] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 21.848339] nsc-ircc, chip->init
[ 21.848354] nsc-ircc, Found chip at base=0x164e
[ 21.848396] nsc-ircc, driver loaded (Dag Brattli)
[ 21.850065] IrDA: Registered device irda0
[ 21.850069] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 22.065402] NET: Registered protocol family 31
[ 22.065405] Bluetooth: HCI device and connection manager initialized
[ 22.065487] Bluetooth: HCI socket layer initialized
[ 22.141593] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 22.141636] btusb 5-1:1.0: usb_probe_interface
[ 22.141639] btusb 5-1:1.0: usb_probe_interface - got id
[ 22.142165] btusb 5-1:1.2: usb_probe_interface
[ 22.142168] btusb 5-1:1.2: usb_probe_interface - got id
[ 22.142230] btusb 5-1:1.3: usb_probe_interface
[ 22.142232] btusb 5-1:1.3: usb_probe_interface - got id
[ 22.142276] usbcore: registered new interface driver btusb
[ 22.338837] Adding 1542200k swap on /dev/sda1. Priority:-1 extents:1 across:1542200k SS
[ 22.397499] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
[ 22.497332] EXT4-fs (sda5): re-mounted. Opts: acl,user_xattr
[ 23.289790] EXT3-fs: barriers not enabled
[ 23.304152] kjournald starting. Commit interval 5 seconds
[ 23.318151] EXT3-fs (sda2): using internal journal
[ 23.332248] EXT3-fs (sda2): mounted filesystem with writeback data mode
[ 23.523596] fuse init (API version 7.15)
[ 25.220782] [drm] Setting GART location based on new memory map
[ 25.221561] [drm] Loading R500 Microcode
[ 25.222163] [drm] Num pipes: 1
[ 25.222179] [drm] writeback test succeeded in 2 usecs
[ 25.604249] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
[ 26.094649] Bluetooth: L2CAP ver 2.15
[ 26.094655] Bluetooth: L2CAP socket layer initialized
[ 26.147809] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.147814] Bluetooth: BNEP filters: protocol multicast
[ 26.181860] Bluetooth: SCO (Voice Link) ver 0.6
[ 26.181864] Bluetooth: SCO socket layer initialized
[ 26.190291] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
[ 26.348060] Bluetooth: RFCOMM TTY layer initialized
[ 26.348074] Bluetooth: RFCOMM socket layer initialized
[ 26.348077] Bluetooth: RFCOMM ver 1.11
[ 30.080907] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X
[ 30.136263] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X
[ 30.153545] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 32.298941] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 32.298949] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[ 33.628610] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 35.234095] RPC: Registered udp transport module.
[ 35.234101] RPC: Registered tcp transport module.
[ 35.234104] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 41.384898] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 51.614500] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 61.226257] wlan0: deauthenticating from 00:27:19:16:04:fa by local choice (reason=3)
[ 61.229462] wlan0: authenticate with 00:27:19:16:04:fa (try 1)
[ 61.232450] wlan0: authenticated
[ 61.234072] wlan0: associate with 00:27:19:16:04:fa (try 1)
[ 61.236955] wlan0: RX AssocResp from 00:27:19:16:04:fa (capab=0x431 status=0 aid=3)
[ 61.236962] wlan0: associated
[ 61.244315] wlan0: deauthenticated from 00:27:19:16:04:fa (Reason: 7)
[ 61.256989] cfg80211: Calling CRDA to update world regulatory domain
[ 61.761554] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 63.946342] wlan0: authenticate with 00:27:19:16:04:fa (try 1)
[ 63.948231] wlan0: authenticated
[ 63.948391] wlan0: associate with 00:27:19:16:04:fa (try 1)
[ 63.950846] wlan0: RX AssocResp from 00:27:19:16:04:fa (capab=0x431 status=0 aid=5)
[ 63.950853] wlan0: associated
[ 71.774631] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 81.854673] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 91.917681] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 101.997769] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 112.027842] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 122.257803] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 132.287885] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 142.400870] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 152.480920] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 173.023815] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 193.566699] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 214.093578] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 234.369630] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 254.713618] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 274.972647] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 294.183288] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 304.096138] EXT4-fs (sda5): error count: 239
[ 304.096151] EXT4-fs (sda5): initial error at 1282834433: ext4_readdir:157: inode 212849
[ 304.096161] EXT4-fs (sda5): last error at 1282835128: ext4_readdir:157: inode 212907
[ 314.443344] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 334.769353] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 355.162305] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 375.280446] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 395.615428] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 415.825477] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 435.202031] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 455.678940] SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:16:41:e3:2c:76:00:27:19:16:04:fa:08:00 SRC=213.151.88.130 DST=192.168.28.100 LEN=81 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=UDP SPT=1194 DPT=52372 LEN=61
[ 1651.552107] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=66.220.147.26 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=29298 DF PROTO=TCP SPT=56001 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A000527E077965DC1)
[ 1657.568086] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=80.249.165.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=62180 DF PROTO=TCP SPT=40163 DPT=80 WINDOW=91 RES=0x00 ACK FIN URGP=0 OPT (0101080A00052DC0D809F3AE)
[ 1657.696093] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=69.63.181.49 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=39253 DF PROTO=TCP SPT=37212 DPT=80 WINDOW=137 RES=0x00 ACK FIN URGP=0 OPT (0101080A00052DE0778F2045)
[ 1666.912123] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.123.68.89 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=53492 DF PROTO=TCP SPT=36635 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A000536E010646B5B)
[ 1666.913253] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.123.68.89 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=16011 DF PROTO=TCP SPT=36638 DPT=80 WINDOW=272 RES=0x00 ACK FIN URGP=0 OPT (0101080A000536E010646BAC)
[ 1674.976060] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.122.217.40 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=22867 DF PROTO=TCP SPT=56201 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A00053EC0163B52F3)
[ 1702.240076] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=80.249.165.33 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=30937 DF PROTO=TCP SPT=40186 DPT=80 WINDOW=137 RES=0x00 ACK FIN URGP=0 OPT (0101080A00055960D80A20BA)
[ 1716.448080] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.123.68.89 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=20694 DF PROTO=TCP SPT=36664 DPT=80 WINDOW=137 RES=0x00 ACK FIN URGP=0 OPT (0101080A00056740106489F9)
[ 2471.392095] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=78.46.16.178 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=16717 DF PROTO=TCP SPT=35311 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A00084880210467DF)
[ 2531.424110] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=78.46.16.178 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=58622 DF PROTO=TCP SPT=55494 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A0008832021047F4F)
[ 4187.104136] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=78.46.16.178 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=20383 DF PROTO=TCP SPT=44196 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A000ED4002106FDD7)
[ 5321.184104] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=78.46.16.178 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=37211 DF PROTO=TCP SPT=43457 DPT=80 WINDOW=182 RES=0x00 ACK FIN URGP=0 OPT (0101080A001327802108B309)
[ 9325.664086] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=91.189.94.12 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=31410 DF PROTO=TCP SPT=44621 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A00226E20145E8A5A)
[ 9325.664153] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=91.189.94.12 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=42686 DF PROTO=TCP SPT=44619 DPT=80 WINDOW=63 RES=0x00 ACK FIN URGP=0 OPT (0101080A00226E20145E8A5A)
[ 9325.664199] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=91.189.94.12 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=51599 DF PROTO=TCP SPT=44620 DPT=80 WINDOW=145 RES=0x00 ACK FIN URGP=0 OPT (0101080A00226E20145E8A5A)
[ 9782.752110] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=19184 DF PROTO=TCP SPT=42559 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0
[ 9786.848144] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=23185 DF PROTO=TCP SPT=42560 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0
[ 9796.064101] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.78 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=62371 DF PROTO=TCP SPT=45784 DPT=80 WINDOW=525 RES=0x00 ACK FIN URGP=0
[ 9805.280113] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.77 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=28595 DF PROTO=TCP SPT=47167 DPT=80 WINDOW=206 RES=0x00 ACK FIN URGP=0
[ 9816.800073] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12081 DF PROTO=TCP SPT=42581 DPT=80 WINDOW=434 RES=0x00 ACK FIN URGP=0
[ 9865.568103] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=66.196.65.174 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=44200 DF PROTO=TCP SPT=59036 DPT=80 WINDOW=101 RES=0x00 ACK FIN URGP=0 OPT (0101080A00247D608DB3593F)
[ 9874.656107] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=66.196.65.174 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=21578 DF PROTO=TCP SPT=59035 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0 OPT (0101080A00248640724BF549)
[ 9891.168152] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=12598 DF PROTO=TCP SPT=42630 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0
[ 9902.816121] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=69.147.123.63 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=44708 DF PROTO=TCP SPT=53299 DPT=80 WINDOW=365 RES=0x00 ACK FIN URGP=0
[ 9904.864101] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.77 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=51208 DF PROTO=TCP SPT=47246 DPT=80 WINDOW=183 RES=0x00 ACK FIN URGP=0
[ 9905.888098] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=76.13.18.79 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=48629 DF PROTO=TCP SPT=42658 DPT=80 WINDOW=565 RES=0x00 ACK FIN URGP=0
[ 9944.544109] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=69.147.123.63 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=32562 DF PROTO=TCP SPT=53355 DPT=80 WINDOW=160 RES=0x00 ACK FIN URGP=0
[ 9944.544201] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=69.147.123.63 LEN=40 TOS=0x00 PREC=0x00 TTL=64 ID=31064 DF PROTO=TCP SPT=53357 DPT=80 WINDOW=137 RES=0x00 ACK FIN URGP=0
[14076.512085] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=195.111.192.12 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=37133 DF PROTO=TCP SPT=43055 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A00348DA01B812E86)
[24556.438376]
[24556.438378] =======================================================
[24556.438384] [ INFO: possible circular locking dependency detected ]
[24556.438387] 2.6.36-rc6-00084-gc6ea21e-dirty #99
[24556.438390] -------------------------------------------------------
[24556.438393] sh/19063 is trying to acquire lock:
[24556.438395] (s_active#121){++++.+}, at: [<ffffffff8111f29a>] sysfs_addrm_finish+0x31/0x5a
[24556.438407]
[24556.438408] but task is already holding lock:
[24556.438410] (dbs_mutex){+.+.+.}, at: [<ffffffff8138642d>] cpufreq_governor_dbs+0x37c/0x427
[24556.438420]
[24556.438421] which lock already depends on the new lock.
[24556.438422]
[24556.438424]
[24556.438425] the existing dependency chain (in reverse order) is:
[24556.438427]
[24556.438428] -> #2 (dbs_mutex){+.+.+.}:
[24556.438433] [<ffffffff81068d6b>] __lock_acquire+0x889/0x8fa
[24556.438440] [<ffffffff81068ecb>] lock_acquire+0xef/0x115
[24556.438445] [<ffffffff8144a677>] mutex_lock_nested+0x4b/0x2e6
[24556.438451] [<ffffffff81386127>] cpufreq_governor_dbs+0x76/0x427
[24556.438456] [<ffffffff81382e16>] __cpufreq_governor+0x10b/0x14c
[24556.438461] [<ffffffff81382f5b>] __cpufreq_set_policy+0x104/0x142
[24556.438465] [<ffffffff81384a51>] store_scaling_governor+0x190/0x1ca
[24556.438470] [<ffffffff81383f4f>] store+0x56/0x79
[24556.438474] [<ffffffff8111dc22>] sysfs_write_file+0x103/0x13f
[24556.438480] [<ffffffff810ccfe6>] vfs_write+0xae/0x136
[24556.438487] [<ffffffff810cd127>] sys_write+0x45/0x6c
[24556.438491] [<ffffffff8100202b>] system_call_fastpath+0x16/0x1b
[24556.438497]
[24556.438498] -> #1 (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}:
[24556.438503] [<ffffffff81068d6b>] __lock_acquire+0x889/0x8fa
[24556.438508] [<ffffffff81068ecb>] lock_acquire+0xef/0x115
[24556.438512] [<ffffffff8144ab7f>] down_write+0x2c/0x4f
[24556.438517] [<ffffffff81382c80>] lock_policy_rwsem_write+0x4a/0x7a
[24556.438522] [<ffffffff81383f32>] store+0x39/0x79
[24556.438526] [<ffffffff8111dc22>] sysfs_write_file+0x103/0x13f
[24556.438531] [<ffffffff810ccfe6>] vfs_write+0xae/0x136
[24556.438536] [<ffffffff810cd127>] sys_write+0x45/0x6c
[24556.438540] [<ffffffff8100202b>] system_call_fastpath+0x16/0x1b
[24556.438545]
[24556.438546] -> #0 (s_active#121){++++.+}:
[24556.438552] [<ffffffff81067ee6>] validate_chain+0x727/0xd23
[24556.438557] [<ffffffff81068d6b>] __lock_acquire+0x889/0x8fa
[24556.438561] [<ffffffff81068ecb>] lock_acquire+0xef/0x115
[24556.438566] [<ffffffff8111e87e>] sysfs_deactivate+0x8e/0xcb
[24556.438571] [<ffffffff8111f29a>] sysfs_addrm_finish+0x31/0x5a
[24556.438575] [<ffffffff8111d236>] sysfs_hash_and_remove+0x54/0x78
[24556.438580] [<ffffffff8112074c>] sysfs_remove_group+0x90/0xc9
[24556.438584] [<ffffffff81386441>] cpufreq_governor_dbs+0x390/0x427
[24556.438589] [<ffffffff81382e16>] __cpufreq_governor+0x10b/0x14c
[24556.438594] [<ffffffff81382f45>] __cpufreq_set_policy+0xee/0x142
[24556.438599] [<ffffffff81384a51>] store_scaling_governor+0x190/0x1ca
[24556.438604] [<ffffffff81383f4f>] store+0x56/0x79
[24556.438608] [<ffffffff8111dc22>] sysfs_write_file+0x103/0x13f
[24556.438613] [<ffffffff810ccfe6>] vfs_write+0xae/0x136
[24556.438617] [<ffffffff810cd127>] sys_write+0x45/0x6c
[24556.438622] [<ffffffff8100202b>] system_call_fastpath+0x16/0x1b
[24556.438627]
[24556.438628] other info that might help us debug this:
[24556.438629]
[24556.438632] 4 locks held by sh/19063:
[24556.438634] #0: (&buffer->mutex){+.+.+.}, at: [<ffffffff8111db56>] sysfs_write_file+0x37/0x13f
[24556.438642] #1: (s_active#120){.+.+.+}, at: [<ffffffff8111dc01>] sysfs_write_file+0xe2/0x13f
[24556.438651] #2: (&per_cpu(cpu_policy_rwsem, cpu)){+++++.}, at: [<ffffffff81382c80>] lock_policy_rwsem_write+0x4a/0x7a
[24556.438659] #3: (dbs_mutex){+.+.+.}, at: [<ffffffff8138642d>] cpufreq_governor_dbs+0x37c/0x427
[24556.438667]
[24556.438667] stack backtrace:
[24556.438671] Pid: 19063, comm: sh Not tainted 2.6.36-rc6-00084-gc6ea21e-dirty #99
[24556.438674] Call Trace:
[24556.438679] [<ffffffff810670c3>] print_circular_bug+0xae/0xbd
[24556.438684] [<ffffffff81067ee6>] validate_chain+0x727/0xd23
[24556.438689] [<ffffffff81068d6b>] __lock_acquire+0x889/0x8fa
[24556.438694] [<ffffffff81066798>] ? mark_held_locks+0x52/0x70
[24556.438699] [<ffffffff81065450>] ? lockdep_init_map+0x9b/0x4fb
[24556.438703] [<ffffffff8111f29a>] ? sysfs_addrm_finish+0x31/0x5a
[24556.438707] [<ffffffff81068ecb>] lock_acquire+0xef/0x115
[24556.438711] [<ffffffff8111f29a>] ? sysfs_addrm_finish+0x31/0x5a
[24556.438716] [<ffffffff8111e87e>] sysfs_deactivate+0x8e/0xcb
[24556.438720] [<ffffffff8111f29a>] ? sysfs_addrm_finish+0x31/0x5a
[24556.438725] [<ffffffff8111f29a>] sysfs_addrm_finish+0x31/0x5a
[24556.438730] [<ffffffff8111d236>] sysfs_hash_and_remove+0x54/0x78
[24556.438734] [<ffffffff8112074c>] sysfs_remove_group+0x90/0xc9
[24556.438739] [<ffffffff81386441>] cpufreq_governor_dbs+0x390/0x427
[24556.438744] [<ffffffff81382e16>] __cpufreq_governor+0x10b/0x14c
[24556.438749] [<ffffffff81382f45>] __cpufreq_set_policy+0xee/0x142
[24556.438754] [<ffffffff81384a51>] store_scaling_governor+0x190/0x1ca
[24556.438758] [<ffffffff81384874>] ? handle_update+0x0/0xe
[24556.438763] [<ffffffff81383f4f>] store+0x56/0x79
[24556.438768] [<ffffffff8111dc22>] sysfs_write_file+0x103/0x13f
[24556.438773] [<ffffffff810ccfe6>] vfs_write+0xae/0x136
[24556.438777] [<ffffffff810cd127>] sys_write+0x45/0x6c
[24556.438782] [<ffffffff8100202b>] system_call_fastpath+0x16/0x1b
[24556.659027] [drm] Num pipes: 1
[24556.699853] wlan0: deauthenticating from 00:27:19:16:04:fa by local choice (reason=3)
[24556.712097] cfg80211: Calling CRDA to update world regulatory domain
[24556.749422] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 93 us
[24556.803392] PM: Syncing filesystems ... done.
[24556.858170] Freezing user space processes ... (elapsed 0.01 seconds) done.
[24556.872115] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[24556.888111] Suspending console(s) (use no_console_suspend to debug)
[24556.928402] usb 5-2: usb suspend
[24556.929620] btusb_intr_complete: hci0 urb ffff8800b8f0ce00 failed to resubmit (1)
[24556.929626] uhci_hcd 0000:00:1d.3: release dev 2 ep81-INT, period 1, phase 0, 23 us
[24556.930622] btusb_bulk_complete: hci0 urb ffff8800b8f0ca40 failed to resubmit (1)
[24556.931621] btusb_bulk_complete: hci0 urb ffff8800b8f0c980 failed to resubmit (1)
[24556.931641] usb 5-1: usb suspend
[24557.083914] usb 2-2: usb suspend
[24557.083954] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[24557.084103] sd 0:0:0:0: [sda] Stopping disk
[24557.130236] hub 5-0:1.0: hub_suspend
[24557.130242] usb usb5: bus suspend
[24557.130245] usb usb5: suspend_rh
[24557.130289] hub 2-0:1.0: hub_suspend
[24557.130294] usb usb2: bus suspend
[24557.130296] usb usb2: suspend_rh
[24557.131578] nsc-ircc 00:0a: disabled
[24557.132114] pci 0000:01:00.0: PCI INT A disabled
[24557.132208] PIIX_IDE 0000:00:1f.1: PCI INT C disabled
[24557.132277] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[24557.132283] uhci_hcd 0000:00:1d.3: uhci_pci_suspend
[24557.132297] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[24557.132303] uhci_hcd 0000:00:1d.2: uhci_pci_suspend
[24557.132319] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[24557.132326] uhci_hcd 0000:00:1d.1: uhci_pci_suspend
[24557.132341] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[24557.132346] uhci_hcd 0000:00:1d.0: uhci_pci_suspend
[24557.132363] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[24557.132374] e1000e 0000:02:00.0: PCI INT A disabled
[24557.132386] e1000e 0000:02:00.0: PME# enabled
[24557.132398] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[24557.236106] HDA Intel 0000:00:1b.0: PCI INT B disabled
[24557.392044] PM: suspend of devices complete after 502.423 msecs
[24557.392520] ehci_hcd 0000:00:1d.7: wakeup: 0
[24557.436028] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[24557.436033] ehci_hcd 0000:00:1d.7: --> PCI D3hot
[24557.436065] uhci_hcd 0000:00:1d.3: wakeup: 0
[24557.436069] uhci_hcd 0000:00:1d.3: --> PCI D0
[24557.436101] uhci_hcd 0000:00:1d.2: wakeup: 0
[24557.460040] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D3
[24557.460042] uhci_hcd 0000:00:1d.2: --> PCI D3hot
[24557.460074] uhci_hcd 0000:00:1d.1: wakeup: 0
[24557.460078] uhci_hcd 0000:00:1d.1: --> PCI D0
[24557.460109] uhci_hcd 0000:00:1d.0: wakeup: 0
[24557.484039] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[24557.484042] uhci_hcd 0000:00:1d.0: --> PCI D3hot
[24557.484070] PM: late suspend of devices complete after 92.021 msecs
[24557.484321] ACPI: Preparing to enter system sleep state S3
[24557.644056] PM: Saving platform NVS memory
[24557.644059] Disabling non-boot CPUs ...
[24557.796032] CPU 1 is now offline
[24557.796034] lockdep: fixing up alternatives.
[24557.796038] SMP alternatives: switching to UP code
[24557.802701] Extended CMOS year: 2000
[24557.802701] Back to C!
[24557.802701] PM: Restoring platform NVS memory
[24557.802701] Extended CMOS year: 2000
[24557.802701] Enabling non-boot CPUs ...
[24557.804046] lockdep: fixing up alternatives.
[24557.804049] SMP alternatives: switching to SMP code
[24557.809957] Booting Node 0 Processor 1 APIC 0x1
[24557.972035] CPU1 is up
[24557.972393] ACPI: Waking up from system sleep state S3
[24558.324115] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[24558.324183] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[24558.324232] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xc011c001)
[24558.324251] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[24558.324331] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[24558.324402] pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20007060, writing 0x7060)
[24558.324417] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[24558.324473] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b)
[24558.324489] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421)
[24558.324495] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00)
[24558.324502] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x9080)
[24558.324513] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[24558.324522] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[24558.368027] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[24558.376039] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[24558.376071] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[24558.384038] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[24558.392038] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[24558.392071] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[24558.400038] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[24558.408038] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[24558.408069] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[24558.416038] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[24558.424038] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[24558.424072] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[24558.424120] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[24558.432038] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[24558.440038] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[24558.440079] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007)
[24558.440218] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[24558.440832] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[24558.440963] pci 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x3c0010b)
[24558.440971] pci 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0xa4fc)
[24558.440978] pci 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0xa400)
[24558.440986] pci 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0xa0fc)
[24558.440993] pci 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0xa000)
[24558.441001] pci 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0xc7fff000)
[24558.441009] pci 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0xc4000000)
[24558.441016] pci 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000)
[24558.441024] pci 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000)
[24558.441031] pci 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615)
[24558.441041] pci 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000)
[24558.441049] pci 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a808)
[24558.441059] pci 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
[24558.441170] PM: early resume of devices complete after 117.123 msecs
[24558.441273] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[24558.441286] HDA Intel 0000:00:1b.0: setting latency timer to 64
[24558.441357] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[24558.441458] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[24558.441466] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[24558.441471] uhci_hcd 0000:00:1d.1: uhci_pci_resume
[24558.441476] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2f00
[24558.441479] uhci_hcd 0000:00:1d.1: Performing full reset
[24558.441485] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[24558.441504] usb usb3: root hub lost power or was reset
[24558.441534] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[24558.441548] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[24558.441554] uhci_hcd 0000:00:1d.3: uhci_pci_resume
[24558.441559] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000
[24558.441562] uhci_hcd 0000:00:1d.3: Performing full reset
[24558.441597] usb usb5: root hub lost power or was reset
[24558.441634] pci 0000:00:1e.0: setting latency timer to 64
[24558.441651] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[24558.441657] PIIX_IDE 0000:00:1f.1: setting latency timer to 64
[24558.441696] ahci 0000:00:1f.2: setting latency timer to 64
[24558.441733] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[24558.441739] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[24558.441751] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[24558.441755] uhci_hcd 0000:00:1d.0: uhci_pci_resume
[24558.441760] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000
[24558.441762] uhci_hcd 0000:00:1d.0: Performing full reset
[24558.441778] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[24558.441791] e1000e 0000:02:00.0: PME# disabled
[24558.441792] usb usb2: root hub lost power or was reset
[24558.442002] e1000e 0000:02:00.0: Disabling ASPM L1
[24558.442004] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[24558.442067] pci 0000:01:00.0: power state changed by ACPI to D0
[24558.442085] pci 0000:01:00.0: power state changed by ACPI to D0
[24558.442092] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X
[24558.442111] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[24558.442132] pci 0000:01:00.0: setting latency timer to 64
[24558.442215] usb usb2: usb resume
[24558.442218] usb usb2: wakeup_rh
[24558.442234] usb usb3: usb resume
[24558.442236] usb usb3: wakeup_rh
[24558.442310] usb usb5: usb resume
[24558.442312] usb usb5: wakeup_rh
[24558.442375] sd 0:0:0:0: [sda] Starting disk
[24558.443020] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[24558.443184] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[24558.443191] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[24558.443199] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[24558.443204] uhci_hcd 0000:00:1d.2: uhci_pci_resume
[24558.443208] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
[24558.443211] uhci_hcd 0000:00:1d.2: Performing full reset
[24558.443248] usb usb4: root hub lost power or was reset
[24558.443264] usb usb4: usb resume
[24558.443266] usb usb4: wakeup_rh
[24558.445408] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[24558.445674] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[24558.445688] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[24558.445745] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[24558.445836] usb usb1: usb resume
[24558.445847] ehci_hcd 0000:00:1d.7: resume root hub
[24558.456076] hub 2-0:1.0: hub_reset_resume
[24558.456082] hub 2-0:1.0: trying to enable port power on non-switchable hub
[24558.456105] hub 3-0:1.0: hub_reset_resume
[24558.456110] hub 3-0:1.0: trying to enable port power on non-switchable hub
[24558.456126] hub 5-0:1.0: hub_reset_resume
[24558.456131] hub 5-0:1.0: trying to enable port power on non-switchable hub
[24558.456148] hub 4-0:1.0: hub_reset_resume
[24558.456152] hub 4-0:1.0: trying to enable port power on non-switchable hub
[24558.463541] nsc-ircc 00:0a: activated
[24558.467693] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[24558.467943] hda: UDMA/33 mode selected
[24558.480120] ehci_hcd 0000:00:1d.7: port 2 low speed --> companion
[24558.560113] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00
[24558.560119] hub 5-0:1.0: port 1: status 0100 change 0003
[24558.560137] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
[24558.560142] hub 5-0:1.0: port 2: status 0100 change 0003
[24558.560174] uhci_hcd 0000:00:1d.0: port 2 portsc 01ab,00
[24558.560179] hub 2-0:1.0: port 2: status 0301 change 0003
[24558.576255] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
[24558.576261] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0 ACK POWER OWNER sig=j CONNECT
[24558.576504] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
[24558.576508] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003801 0 ACK POWER OWNER sig=j CONNECT
[24558.576517] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC
[24558.592081] hub 1-0:1.0: hub_resume
[24558.592114] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0 ACK POWER OWNER sig=se0 CSC
[24558.592128] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0 ACK POWER OWNER sig=se0 CSC
[24558.696101] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00
[24558.696111] usb 2-2: finish reset-resume
[24558.696115] usb 5-1: finish reset-resume
[24558.696128] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
[24558.696137] usb 5-2: finish reset-resume
[24558.760086] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[24558.760599] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[24558.760603] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[24558.760607] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[24558.762131] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[24558.762135] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[24558.762139] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[24558.762498] ata1.00: configured for UDMA/133
[24558.776974] ata1.00: configured for UDMA/133
[24558.776978] ata1: EH complete
[24558.956062] usb 2-2: reset low speed USB device using uhci_hcd and address 2
[24559.356087] usb 5-1: reset full speed USB device using uhci_hcd and address 2
[24559.502349] btusb 5-1:1.0: no reset_resume for driver btusb?
[24559.502353] btusb 5-1:1.1: no reset_resume for driver btusb?
[24559.502356] btusb 5-1:1.0: forced unbind
[24559.592086] usb usb3: suspend_rh (auto-stop)
[24559.592111] usb usb4: suspend_rh (auto-stop)
[24559.600086] usb 5-2: reset full speed USB device using uhci_hcd and address 3
[24559.732050] usb 5-2: ep0 maxpacket = 8
[24559.754571] PM: resume of devices complete after 1313.353 msecs
[24559.754659] btusb 5-1:1.0: usb_probe_interface
[24559.754662] btusb 5-1:1.0: usb_probe_interface - got id
[24559.757895] Restarting tasks ...
[24559.757938] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[24559.757956] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[24559.757969] hub 2-0:1.0: state 7 ports 2 chg 0004 evt 0000
[24559.757990] hub 2-0:1.0: port 2, status 0303, change 0000, 1.5 Mb/s
[24559.758001] hub 5-0:1.0: state 7 ports 2 chg 0006 evt 0006
[24559.758017] hub 5-0:1.0: port 1, status 0103, change 0000, 12 Mb/s
[24559.758033] hub 5-0:1.0: port 2, status 0103, change 0000, 12 Mb/s
[24559.758043] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
[24559.784334] uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
[24559.787809] done.
[24559.787823] video LNXVIDEO:01: Restoring backlight state
[24559.862350] [drm] Num pipes: 1
[24560.085624] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
[24560.496478] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X
[24560.552211] e1000e 0000:02:00.0: irq 47 for MSI/MSI-X
[24561.824104] hub 4-0:1.0: hub_suspend
[24561.824121] usb usb4: bus auto-suspend
[24561.824127] usb usb4: suspend_rh
[24561.824155] hub 3-0:1.0: hub_suspend
[24561.824165] usb usb3: bus auto-suspend
[24561.824170] usb usb3: suspend_rh
[24561.824194] hub 1-0:1.0: hub_suspend
[24561.824204] usb usb1: bus auto-suspend
[24561.824209] ehci_hcd 0000:00:1d.7: suspend root hub
[24562.158720] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[24562.158732] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[24570.870068] wlan0: deauthenticating from 00:27:19:16:04:fa by local choice (reason=3)
[24570.883288] wlan0: authenticate with 00:27:19:16:04:fa (try 1)
[24570.885197] wlan0: authenticated
[24570.885266] wlan0: associate with 00:27:19:16:04:fa (try 1)
[24570.887675] wlan0: RX AssocResp from 00:27:19:16:04:fa (capab=0x431 status=0 aid=4)
[24570.887682] wlan0: associated
[24633.952084] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=88.209.222.127 LEN=196 TOS=0x10 PREC=0x00 TTL=64 ID=23342 DF PROTO=TCP SPT=52499 DPT=22 WINDOW=501 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD3A0017F775F)
[24636.640084] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=74.125.43.105 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=64533 DF PROTO=TCP SPT=54502 DPT=80 WINDOW=203 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD640A326EB96)
[24636.768080] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=195.135.221.39 LEN=89 TOS=0x00 PREC=0x00 TTL=64 ID=20778 DF PROTO=TCP SPT=36890 DPT=993 WINDOW=4560 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD66012B71780)
[24637.856087] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=74.125.43.138 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=60716 DF PROTO=TCP SPT=58428 DPT=80 WINDOW=54 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD770F2904CF1)
[24637.856175] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=92.122.212.24 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=49726 DF PROTO=TCP SPT=46810 DPT=80 WINDOW=54 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CD7701CC60B9A)
[24671.584087] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=216.34.181.45 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=47646 DF PROTO=TCP SPT=41016 DPT=80 WINDOW=524 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A005CF86078EF0CB3)
[30470.008057] CE: hpet increased min_delta_ns to 7500 nsec
[31534.592070] CE: hpet increased min_delta_ns to 11250 nsec
[32085.088181] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=199.6.1.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=17838 DF PROTO=TCP SPT=49116 DPT=80 WINDOW=54 RES=0x00 ACK FIN URGP=0 OPT (0101080A00794020AAD173F9)
[32086.112141] SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.28.100 DST=199.6.1.166 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=41980 DF PROTO=TCP SPT=49115 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 OPT (0101080A00794120AAD173F1)
More information about the Alsa-devel
mailing list