[alsa-devel] alsactl adds volume controls?

[Colin Guthrie]

'Twas brillig, and Raymond Yau at 06/10/10 01:05 did gyre and gimble:
> 2010/10/4 Colin Guthrie <gmane at colin.guthr.ie>
>> Just for clarity, the 0 -> -51dB range is for the PCM control (i.e.
>> softvol) only. The Master control gives me -46.5dB in addtiion to that
>> giving a total of -97.5dB. This still isn't as high as the -120dB you
>> are mentioning, but it's a lot closer.
>>
>> Of course I am lucky in that my Master apparently works fine but for
>> those souls without any Master control, I presume the full range should
>> be offered by the PCM softvol?
>>
>> Col
>>
>>
> Did it happen on both channels or only left channel ?
> 
> The workaround mentioned in errata is to lock the sample rate

Did what happen? I was talking about dB ranges, not an event.

Col

-- 

Colin Guthrie
gmane(at)colin.guthr.ie
http://colin.guthr.ie/

Day Job:
  Tribalogic Limited [http://www.tribalogic.net/]
Open Source:
  Mageia Contributor [http://www.mageia.org/]
  PulseAudio Hacker [http://www.pulseaudio.org/]
  Trac Hacker [http://trac.edgewall.org/]