[alsa-devel] [PATCHES] Integrate minimal systemd support in alsa-utils

[Takashi Iwai]

At Tue, 23 Nov 2010 03:16:58 +0100,
Lennart Poettering wrote:
> 
> >From c5b414489626fcd46d792ab96db06e254dfeff90 Mon Sep 17 00:00:00 2001
> From: David B. Harris <david at eelf.ddts.net>
> Date: Tue, 23 Nov 2010 02:59:18 +0100
> Subject: [PATCH 1/2] Move asound.state location to /var/lib/alsa/
> 
> /etc might be on a read-only partition which is not suitable for dynamic
> data such as the mixer settings. Hence move the location of asound.state
> to /var/lib.

Could you add configure option to specify the path instead of
replacing the fixed path?
I don't mind to change the default path, but dropping the old path is
no good approach, since alsa-utils is still used by many old distros.


thanks,

Takashi


> ---
>  alsaconf/alsaconf.in |    4 ++--
>  alsactl/alsactl.1    |    4 ++--
>  alsactl/alsactl.c    |    2 +-
>  3 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/alsaconf/alsaconf.in b/alsaconf/alsaconf.in
> index ccc1b37..b9815d1 100644
> --- a/alsaconf/alsaconf.in
> +++ b/alsaconf/alsaconf.in
> @@ -956,8 +956,8 @@ If you have a big amplifier, lower your volumes or say no.
>  	  aplay -N $TESTSOUND
>        fi
>      fi
> -    if [ ! -r /etc/asound.state ]; then
> -	xecho "Saving the mixer setup used for this in /etc/asound.state."
> +    if [ ! -r /var/lib/alsa/asound.state ]; then
> +	xecho "Saving the mixer setup used for this in /var/lib/alsa/asound.state."
>  	$sbindir/alsactl store
>      fi
>      clear
> diff --git a/alsactl/alsactl.1 b/alsactl/alsactl.1
> index eb3cbd1..eb5968c 100644
> --- a/alsactl/alsactl.1
> +++ b/alsactl/alsactl.1
> @@ -43,7 +43,7 @@ Print alsactl version number.
>  
>  .TP
>  \fI\-f, \-\-file\fP
> -Select the configuration file to use. The default is /etc/asound.state.
> +Select the configuration file to use. The default is /var/lib/alsa/asound.state.
>  
>  .TP
>  \fI\-F, \-\-force\fP
> @@ -90,7 +90,7 @@ The configuration file for init. By default, PREFIX/share/alsa/init/00main
>  is used.
>  
>  .SH FILES
> -\fI/etc/asound.state\fP (or whatever file you specify with the
> +\fI/var/lib/alsa/asound.state\fP (or whatever file you specify with the
>  \fB\-f\fP flag) is used to store current settings for your
>  soundcards. The settings include all the usual soundcard mixer
>  settings.  More importantly, alsactl is
> diff --git a/alsactl/alsactl.c b/alsactl/alsactl.c
> index 3b5dfda..59f0738 100644
> --- a/alsactl/alsactl.c
> +++ b/alsactl/alsactl.c
> @@ -30,7 +30,7 @@
>  #include <alsa/asoundlib.h>
>  #include "alsactl.h"
>  
> -#define SYS_ASOUNDRC "/etc/asound.state"
> +#define SYS_ASOUNDRC "/var/lib/alsa/asound.state"
>  
>  int debugflag = 0;
>  int force_restore = 1;
> -- 
> 1.7.3.2
>