[alsa-devel] ASoC: Hooking a TI CODEC to a i.MX27 MCU

[Mark Brown]

On Fri, May 28, 2010 at 12:06:25PM +1000, Stuart Longland wrote:

> I have a userspace application that mmaps the registers for SSI2 and
> AUDMUX, and sets this up, so no big deal ... the clock it receives is
> about 12.1MHz (12.093MHz according to the frequency counter here).

In production this should be done in-kernel.

> When I try to play audio; the AUDMUX configuration is as follows:

> Port:   imx-ssi.0
> Raw:    cb205000
> TxFS output from SSI4, TxClk output from SSI4
> Port is symmetric
> Data received from SSI4

> Port:   SSI4
> Raw:    00001000
> TxFS input, TxClk input
> Port is symmetric
> Data received from imx-ssi.0

This appears reasonable at first glance.

> I'll have a look at the Eukrea CPUIMX27 and baseboard SoC support in a
> moment, since it looks very similar to what we're doing (in that it's a
> TI I²S CODEC hooked to an i.MX27 on SSI4) ... this might reveal clues
> as to what I'm doing wrong.

Have you also checked the pin mux configuration for the i.MX?