[alsa-devel] [RFC PATCH v2 0/3] ep93xx i2s audio
Ryan Mallon
ryan at bluewatersys.com
Wed May 26 07:09:45 CEST 2010
The following patch series adds support for i2s audio on the ep93xx,
with the Snapper CL15 used as an example implementation.
I have created psuedo clocks for sclk and lrclk as suggested by
Hartley/Mark. This moves the sdiv/lrdiv calculation into
ep93xx_i2s_hw_parms. The ep93xx documentation implies that lrclk is
gated for unused bits (ie if lrdiv > word length). If this is true for
all ep93xx i2s setups then the lrclk/sclk's could be replaced by a
single audio rate clock.
I have fixed the enabling/disabling of the i2s peripheral, which
corrects the problem I was having with playback sometimes resulting in
noise.
I have also made a number of changes suggested from the first round of
patches.
Ryan Mallon (3):
ep93xx i2s audio driver
ep93xx i2s core support
ep93xx i2s audio snapper cl15 support
arch/arm/mach-ep93xx/clock.c | 69 ++++-
arch/arm/mach-ep93xx/core.c | 31 ++
arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 10 +
arch/arm/mach-ep93xx/include/mach/platform.h | 1 +
arch/arm/mach-ep93xx/snappercl15.c | 1 +
sound/soc/Kconfig | 1 +
sound/soc/Makefile | 1 +
sound/soc/ep93xx/Kconfig | 18 +
sound/soc/ep93xx/Makefile | 11 +
sound/soc/ep93xx/ep93xx-i2s.c | 489 +++++++++++++++++++++++
sound/soc/ep93xx/ep93xx-i2s.h | 25 ++
sound/soc/ep93xx/ep93xx-pcm.c | 323 +++++++++++++++
sound/soc/ep93xx/ep93xx-pcm.h | 22 +
sound/soc/ep93xx/snappercl15.c | 143 +++++++
14 files changed, 1144 insertions(+), 1 deletions(-)
create mode 100644 sound/soc/ep93xx/Kconfig
create mode 100644 sound/soc/ep93xx/Makefile
create mode 100644 sound/soc/ep93xx/ep93xx-i2s.c
create mode 100644 sound/soc/ep93xx/ep93xx-i2s.h
create mode 100644 sound/soc/ep93xx/ep93xx-pcm.c
create mode 100644 sound/soc/ep93xx/ep93xx-pcm.h
create mode 100644 sound/soc/ep93xx/snappercl15.c
More information about the Alsa-devel
mailing list