[alsa-devel] [patch 3/5] cs42l51: add asoc driver
Mark Brown
broonie at opensource.wolfsonmicro.com
Wed May 26 00:51:52 CEST 2010
On Tue, May 25, 2010 at 02:22:39PM +0200, apatard at mandriva.com wrote:
> + /* route microphone */
> + ret = snd_soc_write(codec, CS42L51_ADC_INPUT, 0xF0);
> + if (ret < 0)
> + goto error_alloc;
As I said last time this really should be visible to userspace rather
than fixed function in the driver.
> +#define DAPM_EVENT_PRE_POST_PMD (SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD)
As I said last time this should be in soc-dapm.h rather than in the
driver.
> + SND_SOC_DAPM_DAC_E("Left DAC", "Left HiFi Playback",
> + CS42L51_POWER_CTL1, 5, 1,
> + cs42l51_pdn_event, DAPM_EVENT_PRE_POST_PMD),
> + SND_SOC_DAPM_DAC_E("Right DAC", "Right HiFi Playback",
> + CS42L51_POWER_CTL1, 6, 1,
> + cs42l51_pdn_event, DAPM_EVENT_PRE_POST_PMD),
Your event here uses snd_soc_write() so for a stereo enable/disable
you'll do extra writes. If you changed it to use snd_soc_update_bits()
then these would be suppressed.
> + switch (format & SND_SOC_DAIFMT_MASTER_MASK) {
> + case SND_SOC_DAIFMT_CBM_CFM:
> + cs42l51->func = MODE_MASTER;
> + break;
> + default:
> + case SND_SOC_DAIFMT_CBS_CFS:
> + cs42l51->func = MODE_SLAVE_AUTO;
> + break;
Is the device really capable of automatically coping with mixed master
buses automatically, or should the default be to return an error?
> + dev_info(&pdev->dev, "CS42L51 ALSA SoC Codec\n");
I really would prefer to remove this.
> +struct cs42l51_setup_data {
> + int i2c_bus;
> + unsigned short i2c_address;
> +};
This is unused and could be removed.
More information about the Alsa-devel
mailing list