[alsa-devel] [PATCH] ad193x: add set_sysclk entry to support different clock input
Barry Song
21cnbao at gmail.com
Fri May 21 05:57:01 CEST 2010
Signed-off-by: Barry Song <21cnbao at gmail.com>
---
sound/soc/codecs/ad193x.c | 41 ++++++++++++++++++++++++++++++++++++++++-
sound/soc/codecs/ad193x.h | 5 +++++
2 files changed, 45 insertions(+), 1 deletions(-)
diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c
index c8ca114..1def75e 100644
--- a/sound/soc/codecs/ad193x.c
+++ b/sound/soc/codecs/ad193x.c
@@ -24,6 +24,7 @@
/* codec private data */
struct ad193x_priv {
+ unsigned int sysclk;
struct snd_soc_codec codec;
u8 reg_cache[AD193X_NUM_REGS];
};
@@ -251,15 +252,32 @@ static int ad193x_set_dai_fmt(struct snd_soc_dai *codec_dai,
return 0;
}
+static int ad193x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct ad193x_priv *ad193x = snd_soc_codec_get_drvdata(codec);
+ switch (freq) {
+ case 12288000:
+ case 18432000:
+ case 24576000:
+ case 36864000:
+ ad193x->sysclk = freq;
+ return 0;
+ }
+ return -EINVAL;
+}
+
static int ad193x_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
- int word_len = 0, reg = 0;
+ int word_len = 0, reg = 0, master_rate = 0;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->card->codec;
+ struct ad193x_priv *ad193x = snd_soc_codec_get_drvdata(codec);
/* bit size */
switch (params_format(params)) {
@@ -275,6 +293,25 @@ static int ad193x_hw_params(struct snd_pcm_substream *substream,
break;
}
+ switch (ad193x->sysclk) {
+ case 12288000:
+ master_rate = AD193X_PLL_INPUT_256;
+ break;
+ case 18432000:
+ master_rate = AD193X_PLL_INPUT_384;
+ break;
+ case 24576000:
+ master_rate = AD193X_PLL_INPUT_512;
+ break;
+ case 36864000:
+ master_rate = AD193X_PLL_INPUT_768;
+ break;
+ }
+
+ reg = snd_soc_read(codec, AD193X_PLL_CLK_CTRL0);
+ reg = (reg & AD193X_PLL_INPUT_MASK) | master_rate;
+ snd_soc_write(codec, AD193X_PLL_CLK_CTRL0, reg);
+
reg = snd_soc_read(codec, AD193X_DAC_CTRL2);
reg = (reg & (~AD193X_DAC_WORD_LEN_MASK)) | word_len;
snd_soc_write(codec, AD193X_DAC_CTRL2, reg);
@@ -348,6 +385,7 @@ static int ad193x_bus_probe(struct device *dev, void *ctrl_data, int bus_type)
/* pll input: mclki/xi */
snd_soc_write(codec, AD193X_PLL_CLK_CTRL0, 0x99); /* mclk=24.576Mhz: 0x9D; mclk=12.288Mhz: 0x99 */
snd_soc_write(codec, AD193X_PLL_CLK_CTRL1, 0x04);
+ ad193x->sysclk = 12288000;
ret = snd_soc_register_codec(codec);
if (ret != 0) {
@@ -383,6 +421,7 @@ static struct snd_soc_dai_ops ad193x_dai_ops = {
.hw_params = ad193x_hw_params,
.digital_mute = ad193x_mute,
.set_tdm_slot = ad193x_set_tdm_slot,
+ .set_sysclk = ad193x_set_dai_sysclk,
.set_fmt = ad193x_set_dai_fmt,
};
diff --git a/sound/soc/codecs/ad193x.h b/sound/soc/codecs/ad193x.h
index a03c880..654ba64 100644
--- a/sound/soc/codecs/ad193x.h
+++ b/sound/soc/codecs/ad193x.h
@@ -11,6 +11,11 @@
#define AD193X_PLL_CLK_CTRL0 0x800
#define AD193X_PLL_POWERDOWN 0x01
+#define AD193X_PLL_INPUT_MASK (~0x6)
+#define AD193X_PLL_INPUT_256 (0 << 1)
+#define AD193X_PLL_INPUT_384 (1 << 1)
+#define AD193X_PLL_INPUT_512 (2 << 1)
+#define AD193X_PLL_INPUT_768 (3 << 1)
#define AD193X_PLL_CLK_CTRL1 0x801
#define AD193X_DAC_CTRL0 0x802
#define AD193X_DAC_POWERDOWN 0x01
--
1.5.6.3
More information about the Alsa-devel
mailing list