[alsa-devel] HP dv series mute LED problems?
Takashi Iwai
tiwai at suse.de
Thu May 13 10:01:53 CEST 2010
At Thu, 13 May 2010 00:35:43 +0200,
Thoralf Freitag wrote:
>
> Takashi Iwai schrieb:
> > At Wed, 12 May 2010 21:55:50 +0200,
> > Thoralf Freitag wrote:
> >
> >> Takashi Iwai schrieb:
> >>
> >>> At Wed, 12 May 2010 11:33:06 +0530,
> >>> Kunal Gangakhedkar wrote:
> >>>
> >>>
> >>>> On Wednesday 12 May 2010 2:11:13 am Takashi Iwai wrote:
> >>>>
> >>>>
> >>>>> At Tue, 11 May 2010 22:23:42 +0200,
> >>>>> I wrote:
> >>>>>
> >>>>>
> >>>>>> At Wed, 12 May 2010 00:25:07 +0530,
> >>>>>> Kunal Gangakhedkar wrote:
> >>>>>>
> >>>>>>
> >>>>>>> Hi Takashi,
> >>>>>>>
> >>>>>>> The commit 26ebe0a28986f4845b2c5bea43ac5cc0b9f27f0a seems to undo the mute LED
> >>>>>>> gpio fixes - at least on my dv6 series laptop.
> >>>>>>>
> >>>>>>> Maybe, we need to come up with a better solution to accommodate the problem
> >>>>>>> reported in this thread:
> >>>>>>> http://mailman.alsa-project.org/pipermail/alsa-devel/2010-May/027352.html
> >>>>>>> I believe, that's the reason for the commit, right?
> >>>>>>>
> >>>>>>>
> >>>>>> Yes. And as I checked the previous code, actually dv4 took GPIO 0.
> >>>>>> That's why I added it there back.
> >>>>>>
> >>>>>> But, hmm, then it's really depending on the dv model number.
> >>>>>> Which PCI / codec SSID does your device have?
> >>>>>>
> >>>>>>
> >>>>> As a compromise, how about the additional patch below?
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>> Yes, this patch fixes the problems on my dv6 machine and
> >>>> looks reasonable to me.
> >>>>
> >>>> However, we need confirmation from Thoralf - whether it works for him too.
> >>>> I don't know if STAC_HP_DV4 can be reused for dv7 series machines - since I
> >>>> don't have access to verify it.
> >>>>
> >>>>
> >>> The PCI SSID was already given from his alsa-info.sh output.
> >>> Actually, dv4 and dv7 seem to have very similar implementations and
> >>> almost same SSIDs.
> >>>
> >>>
> >>>
> >>>> Tested-by: Kunal Gangakhedkar <kunal.gangakhedkar at gmail.com> (for dv6-1110ax)
> >>>> Acked-by: Kunal Gangakhedkar <kunal.gangakhedkar at gmail.com>
> >>>>
> >>>>
> >>> thanks,
> >>>
> >>>
> >>> Takashi
> >>> _______________________________________________
> >>> Alsa-devel mailing list
> >>> Alsa-devel at alsa-project.org
> >>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >>>
> >>>
> >> Hi Takashi,
> >>
> >>
> >> sorry for my delay. I've a heavy workload with my job.
> >>
> >>
> >>
> >> Try applying the patch, there is one error. IMHO it isn't a problem because my alsa-driver-1.0.23 patch_sigmatel.c file doesn't contain the line
> >>
> >> - spec->gpio_led = 0x01;
> >>
> >> at this place.
> >>
> >>
> >>
> >>
> >> Hunk #2 succeeded at 1690 (offset -2 lines).
> >> Hunk #3 succeeded at 1703 (offset -2 lines).
> >> Hunk #4 succeeded at 1722 (offset -2 lines).
> >> Hunk #5 succeeded at 5676 (offset -5 lines).
> >> Hunk #6 FAILED at 5687.
> >> Hunk #7 succeeded at 5747 (offset -7 lines).
> >>
> >> 1 out of 7 hunks FAILED -- saving rejects to file
> >> sound/pci/hda/patch_sigmatel.c.rej
> >>
> >>
> >> Here the content of patch_sigmatel.c.rej
> >>
> >>
> >> *************** again:
> >> *** 5681,5687 ****
> >> * detection.
> >> */
> >> spec->hp_detect = 1;
> >> - spec->gpio_led = 0x01;
> >> break;
> >> case STAC_HP_HDX:
> >> spec->num_dmics = 1;
> >> --- 5687,5692 ----
> >> * detection.
> >> */
> >> spec->hp_detect = 1;
> >> break;
> >> case STAC_HP_HDX:
> >> spec->num_dmics = 1;
> >>
> >>
> >> But the patch doesn't solve the problem. Like before, the mute led isn't switched on/off (whithe/orange). Maybe set_hp_led_gpio overwrites the value for gpio_led, which is set static before ?
> >>
> >
> > Try alsa-driver snapshot tarball below.
> > ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
> >
> > The fixed patch is already included there.
> >
> >
> > Takashi
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel at alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >
> Hi Takashi,
>
> I can confirm you that the snaphot above is working with my HP DV 7-1160eg.
OK, thanks for confirmation.
Takashi
More information about the Alsa-devel
mailing list