[alsa-devel] [PATCH] ARM: S3C2412: DMA: Remove I2S FIFO address
Jassi Brar
jassi.brar at samsung.com
Fri May 7 03:21:39 CEST 2010
The S3C DMA API doesn't make use of hw_addr.to/from and also
the FIFO addresses are provided from the I2S drivers. So these
fields are redundant.
This patch removes the hw_addr.to/from fields for I2S and the
inclusion of header, paving way for the header to be moved closer
to the I2S controller drivers.
Signed-off-by: Jassi Brar <jassi.brar at samsung.com>
---
arch/arm/mach-s3c2412/dma.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index e880524..7abecfc 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -30,7 +30,6 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
-#include <plat/regs-s3c2412-iis.h>
#include <plat/regs-iis.h>
#include <plat/regs-spi.h>
@@ -119,13 +118,11 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
.name = "i2s-sdi",
.channels = MAP(S3C2412_DMAREQSEL_I2SRX),
.channels_rx = MAP(S3C2412_DMAREQSEL_I2SRX),
- .hw_addr.from = S3C2410_PA_IIS + S3C2412_IISRXD,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels = MAP(S3C2412_DMAREQSEL_I2STX),
.channels_rx = MAP(S3C2412_DMAREQSEL_I2STX),
- .hw_addr.to = S3C2410_PA_IIS + S3C2412_IISTXD,
},
[DMACH_USB_EP1] = {
.name = "usb-ep1",
--
1.6.2.5
More information about the Alsa-devel
mailing list