[alsa-devel] [PATCH 2/2] [v2] powerpc/alsa: update MPC8610 HPCD audio drivers to support multiple components
Timur Tabi
timur at freescale.com
Tue May 4 01:01:19 CEST 2010
Update the Freescale MPC8610 HPCD audio drivers to support the new multiple-
component architecture in ASoC.
Signed-off-by: Timur Tabi <timur at freescale.com>
---
sound/soc/fsl/fsl_dma.c | 299 ++++++-----
sound/soc/fsl/fsl_dma.h | 19 +-
sound/soc/fsl/fsl_ssi.c | 211 +++++----
sound/soc/fsl/fsl_ssi.h | 25 -
sound/soc/fsl/mpc8610_hpcd.c | 1174 ++++++++++++++++++++----------------------
5 files changed, 844 insertions(+), 884 deletions(-)
rewrite sound/soc/fsl/mpc8610_hpcd.c (62%)
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
index 857e9f7..ff0064c 100644
--- a/sound/soc/fsl/fsl_dma.c
+++ b/sound/soc/fsl/fsl_dma.c
@@ -3,10 +3,11 @@
*
* Author: Timur Tabi <timur at freescale.com>
*
- * Copyright 2007-2008 Freescale Semiconductor, Inc. This file is licensed
- * under the terms of the GNU General Public License version 2. This
- * program is licensed "as is" without any warranty of any kind, whether
- * express or implied.
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
*
* This driver implements ASoC support for the Elo DMA controller, which is
* the DMA controller on Freescale 83xx, 85xx, and 86xx SOCs. In ALSA terms,
@@ -15,10 +16,11 @@
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/of_platform.h>
+#include <linux/list.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -51,26 +53,16 @@
#define FSLDMA_PCM_RATES (SNDRV_PCM_RATE_5512 | SNDRV_PCM_RATE_8000_192000 | \
SNDRV_PCM_RATE_CONTINUOUS)
-/* DMA global data. This structure is used by fsl_dma_open() to determine
- * which DMA channels to assign to a substream. Unfortunately, ASoC V1 does
- * not allow the machine driver to provide this information to the PCM
- * driver in advance, and there's no way to differentiate between the two
- * DMA controllers. So for now, this driver only supports one SSI device
- * using two DMA channels. We cannot support multiple DMA devices.
- *
- * ssi_stx_phys: bus address of SSI STX register
- * ssi_srx_phys: bus address of SSI SRX register
- * dma_channel: pointer to the DMA channel's registers
- * irq: IRQ for this DMA channel
- * assigned: set to 1 if that DMA channel is assigned to a substream
- */
-static struct {
+struct dma_object {
+ struct list_head list;
+ struct snd_soc_platform_driver dai;
dma_addr_t ssi_stx_phys;
dma_addr_t ssi_srx_phys;
- struct ccsr_dma_channel __iomem *dma_channel[2];
- unsigned int irq[2];
- unsigned int assigned[2];
-} dma_global_data;
+ struct ccsr_dma_channel __iomem *channel;
+ unsigned int irq;
+ bool assigned;
+ char path[1];
+};
/*
* The number of DMA links to use. Two is the bare minimum, but if you
@@ -87,8 +79,6 @@ static struct {
* structure.
*
* @link[]: array of link descriptors
- * @controller_id: which DMA controller (0, 1, ...)
- * @channel_id: which DMA channel on the controller (0, 1, 2, ...)
* @dma_channel: pointer to the DMA channel's registers
* @irq: IRQ for this DMA channel
* @substream: pointer to the substream object, needed by the ISR
@@ -103,8 +93,6 @@ static struct {
*/
struct fsl_dma_private {
struct fsl_dma_link_descriptor link[NUM_DMA_LINKS];
- unsigned int controller_id;
- unsigned int channel_id;
struct ccsr_dma_channel __iomem *dma_channel;
unsigned int irq;
struct snd_pcm_substream *substream;
@@ -211,6 +199,9 @@ static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private)
static irqreturn_t fsl_dma_isr(int irq, void *dev_id)
{
struct fsl_dma_private *dma_private = dev_id;
+ struct snd_pcm_substream *substream = dma_private->substream;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct device *dev = rtd->platform->dev;
struct ccsr_dma_channel __iomem *dma_channel = dma_private->dma_channel;
irqreturn_t ret = IRQ_NONE;
u32 sr, sr2 = 0;
@@ -221,11 +212,8 @@ static irqreturn_t fsl_dma_isr(int irq, void *dev_id)
sr = in_be32(&dma_channel->sr);
if (sr & CCSR_DMA_SR_TE) {
- dev_err(dma_private->substream->pcm->card->dev,
- "DMA transmit error (controller=%u channel=%u irq=%u\n",
- dma_private->controller_id,
- dma_private->channel_id, irq);
- fsl_dma_abort_stream(dma_private->substream);
+ dev_err(dev, "dma transmit error\n");
+ fsl_dma_abort_stream(substream);
sr2 |= CCSR_DMA_SR_TE;
ret = IRQ_HANDLED;
}
@@ -234,11 +222,8 @@ static irqreturn_t fsl_dma_isr(int irq, void *dev_id)
ret = IRQ_HANDLED;
if (sr & CCSR_DMA_SR_PE) {
- dev_err(dma_private->substream->pcm->card->dev,
- "DMA%u programming error (channel=%u irq=%u)\n",
- dma_private->controller_id,
- dma_private->channel_id, irq);
- fsl_dma_abort_stream(dma_private->substream);
+ dev_err(dev, "dma programming error\n");
+ fsl_dma_abort_stream(substream);
sr2 |= CCSR_DMA_SR_PE;
ret = IRQ_HANDLED;
}
@@ -252,8 +237,6 @@ static irqreturn_t fsl_dma_isr(int irq, void *dev_id)
ret = IRQ_HANDLED;
if (sr & CCSR_DMA_SR_EOSI) {
- struct snd_pcm_substream *substream = dma_private->substream;
-
/* Tell ALSA we completed a period. */
snd_pcm_period_elapsed(substream);
@@ -304,10 +287,8 @@ static int fsl_dma_new(struct snd_card *card, struct snd_soc_dai *dai,
fsl_dma_hardware.buffer_bytes_max,
&pcm->streams[0].substream->dma_buffer);
if (ret) {
- dev_err(card->dev,
- "Can't allocate playback DMA buffer (size=%u)\n",
- fsl_dma_hardware.buffer_bytes_max);
- return -ENOMEM;
+ dev_err(card->dev, "can't allocate playback dma buffer\n");
+ return ret;
}
ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, card->dev,
@@ -315,10 +296,8 @@ static int fsl_dma_new(struct snd_card *card, struct snd_soc_dai *dai,
&pcm->streams[1].substream->dma_buffer);
if (ret) {
snd_dma_free_pages(&pcm->streams[0].substream->dma_buffer);
- dev_err(card->dev,
- "Can't allocate capture DMA buffer (size=%u)\n",
- fsl_dma_hardware.buffer_bytes_max);
- return -ENOMEM;
+ dev_err(card->dev, "can't allocate capture dma buffer\n");
+ return ret;
}
return 0;
@@ -389,6 +368,10 @@ static int fsl_dma_new(struct snd_card *card, struct snd_soc_dai *dai,
static int fsl_dma_open(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct device *dev = rtd->platform->dev;
+ struct dma_object *dma =
+ container_of(rtd->platform->driver, struct dma_object, dai);
struct fsl_dma_private *dma_private;
struct ccsr_dma_channel __iomem *dma_channel;
dma_addr_t ld_buf_phys;
@@ -406,52 +389,44 @@ static int fsl_dma_open(struct snd_pcm_substream *substream)
ret = snd_pcm_hw_constraint_integer(runtime,
SNDRV_PCM_HW_PARAM_PERIODS);
if (ret < 0) {
- dev_err(substream->pcm->card->dev, "invalid buffer size\n");
+ dev_err(dev, "invalid buffer size\n");
return ret;
}
channel = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
- if (dma_global_data.assigned[channel]) {
- dev_err(substream->pcm->card->dev,
- "DMA channel already assigned\n");
+ if (dma->assigned) {
+ dev_err(dev, "dma channel already assigned\n");
return -EBUSY;
}
- dma_private = dma_alloc_coherent(substream->pcm->card->dev,
- sizeof(struct fsl_dma_private), &ld_buf_phys, GFP_KERNEL);
+ dma_private = dma_alloc_coherent(dev, sizeof(struct fsl_dma_private),
+ &ld_buf_phys, GFP_KERNEL);
if (!dma_private) {
- dev_err(substream->pcm->card->dev,
- "can't allocate DMA private data\n");
+ dev_err(dev, "can't allocate dma private data\n");
return -ENOMEM;
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- dma_private->ssi_sxx_phys = dma_global_data.ssi_stx_phys;
+ dma_private->ssi_sxx_phys = dma->ssi_stx_phys;
else
- dma_private->ssi_sxx_phys = dma_global_data.ssi_srx_phys;
+ dma_private->ssi_sxx_phys = dma->ssi_srx_phys;
- dma_private->dma_channel = dma_global_data.dma_channel[channel];
- dma_private->irq = dma_global_data.irq[channel];
+ dma_private->dma_channel = dma->channel;
+ dma_private->irq = dma->irq;
dma_private->substream = substream;
dma_private->ld_buf_phys = ld_buf_phys;
dma_private->dma_buf_phys = substream->dma_buffer.addr;
- /* We only support one DMA controller for now */
- dma_private->controller_id = 0;
- dma_private->channel_id = channel;
-
ret = request_irq(dma_private->irq, fsl_dma_isr, 0, "DMA", dma_private);
if (ret) {
- dev_err(substream->pcm->card->dev,
- "can't register ISR for IRQ %u (ret=%i)\n",
+ dev_err(dev, "can't register ISR for IRQ %u (ret=%i)\n",
dma_private->irq, ret);
- dma_free_coherent(substream->pcm->card->dev,
- sizeof(struct fsl_dma_private),
+ dma_free_coherent(dev, sizeof(struct fsl_dma_private),
dma_private, dma_private->ld_buf_phys);
return ret;
}
- dma_global_data.assigned[channel] = 1;
+ dma->assigned = 1;
snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
snd_soc_set_runtime_hwparams(substream, &fsl_dma_hardware);
@@ -545,6 +520,8 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream,
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct fsl_dma_private *dma_private = runtime->private_data;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct device *dev = rtd->platform->dev;
/* Number of bits per sample */
unsigned int sample_size =
@@ -605,8 +582,7 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream,
break;
default:
/* We should never get here */
- dev_err(substream->pcm->card->dev,
- "unsupported sample size %u\n", sample_size);
+ dev_err(dev, "unsupported sample size %u\n", sample_size);
return -EINVAL;
}
@@ -688,6 +664,8 @@ static snd_pcm_uframes_t fsl_dma_pointer(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct fsl_dma_private *dma_private = runtime->private_data;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct device *dev = rtd->platform->dev;
struct ccsr_dma_channel __iomem *dma_channel = dma_private->dma_channel;
dma_addr_t position;
snd_pcm_uframes_t frames;
@@ -709,8 +687,7 @@ static snd_pcm_uframes_t fsl_dma_pointer(struct snd_pcm_substream *substream)
if ((position < dma_private->dma_buf_phys) ||
(position > dma_private->dma_buf_end)) {
- dev_err(substream->pcm->card->dev,
- "dma pointer is out of range, halting stream\n");
+ dev_err(dev, "dma pointer is out of range, halting stream\n");
return SNDRV_PCM_POS_XRUN;
}
@@ -771,26 +748,28 @@ static int fsl_dma_close(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct fsl_dma_private *dma_private = runtime->private_data;
- int dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct device *dev = rtd->platform->dev;
+ struct dma_object *dma =
+ container_of(rtd->platform->driver, struct dma_object, dai);
if (dma_private) {
if (dma_private->irq)
free_irq(dma_private->irq, dma_private);
if (dma_private->ld_buf_phys) {
- dma_unmap_single(substream->pcm->card->dev,
- dma_private->ld_buf_phys,
- sizeof(dma_private->link), DMA_TO_DEVICE);
+ dma_unmap_single(dev, dma_private->ld_buf_phys,
+ sizeof(dma_private->link),
+ DMA_TO_DEVICE);
}
/* Deallocate the fsl_dma_private structure */
- dma_free_coherent(substream->pcm->card->dev,
- sizeof(struct fsl_dma_private),
- dma_private, dma_private->ld_buf_phys);
+ dma_free_coherent(dev, sizeof(struct fsl_dma_private),
+ dma_private, dma_private->ld_buf_phys);
substream->runtime->private_data = NULL;
}
- dma_global_data.assigned[dir] = 0;
+ dma->assigned = 0;
return 0;
}
@@ -813,6 +792,41 @@ static void fsl_dma_free_dma_buffers(struct snd_pcm *pcm)
}
}
+/* List of DMA nodes that we've probed */
+static LIST_HEAD(dma_list);
+
+/**
+ * fsl_soc_dma_to_dai - returning the DAI struct for a given DMA node
+ *
+ * When a machine driver registers itself with ASoC, it must provide the
+ * address of the DAI structures that it wants to connect. Most drivers simply
+ * reference global data structures in the various drivers, but we PowerPC
+ * developers are better than that. This driver keeps a list of every DMA
+ * node that it probes, and when the machine driver wants to reference a
+ * DMA DAI, this function provides that service.
+ *
+ * Hopefully one day, ASoC will just want the name of the DMA device, not
+ * some obscure pointer, and this function will go away.
+ */
+struct snd_soc_platform_driver *fsl_soc_dma_to_dai(const char *path,
+ dma_addr_t ssi_stx_phys, dma_addr_t ssi_srx_phys)
+{
+ struct list_head *ptr;
+ struct dma_object *dma;
+
+ list_for_each(ptr, &dma_list) {
+ dma = list_entry(ptr, struct dma_object, list);
+ if (strcmp(path, dma->path) == 0) {
+ dma->ssi_stx_phys = ssi_stx_phys;
+ dma->ssi_srx_phys = ssi_srx_phys;
+ return &dma->dai;
+ }
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL(fsl_soc_dma_to_dai);
+
static struct snd_pcm_ops fsl_dma_ops = {
.open = fsl_dma_open,
.close = fsl_dma_close,
@@ -822,80 +836,91 @@ static struct snd_pcm_ops fsl_dma_ops = {
.pointer = fsl_dma_pointer,
};
-struct snd_soc_platform_driver fsl_soc_platform = {
- .name = "fsl-dma",
- .ops = &fsl_dma_ops,
- .pcm_new = fsl_dma_new,
- .pcm_free = fsl_dma_free_dma_buffers,
-};
-EXPORT_SYMBOL_GPL(fsl_soc_platform);
-
-/**
- * fsl_dma_configure: store the DMA parameters from the fabric driver.
- *
- * This function is called by the ASoC fabric driver to give us the DMA and
- * SSI channel information.
- *
- * Unfortunately, ASoC V1 does make it possible to determine the DMA/SSI
- * data when a substream is created, so for now we need to store this data
- * into a global variable. This means that we can only support one DMA
- * controller, and hence only one SSI.
- */
-int fsl_dma_configure(struct fsl_dma_info *dma_info)
+static int __devinit fsl_soc_dma_probe(struct of_device *of_dev,
+ const struct of_device_id *match)
{
- static int initialized;
+ struct dma_object *dma;
+ struct device_node *np = of_dev->node;
+ int ret;
- /* We only support one DMA controller for now */
- if (initialized)
- return 0;
+ dma = kzalloc(sizeof(*dma) + strlen(np->full_name), GFP_KERNEL);
+ if (!dma) {
+ dev_err(&of_dev->dev, "could not allocate dma object\n");
+ return -ENOMEM;
+ }
- dma_global_data.ssi_stx_phys = dma_info->ssi_stx_phys;
- dma_global_data.ssi_srx_phys = dma_info->ssi_srx_phys;
- dma_global_data.dma_channel[0] = dma_info->dma_channel[0];
- dma_global_data.dma_channel[1] = dma_info->dma_channel[1];
- dma_global_data.irq[0] = dma_info->dma_irq[0];
- dma_global_data.irq[1] = dma_info->dma_irq[1];
- dma_global_data.assigned[0] = 0;
- dma_global_data.assigned[1] = 0;
-
- initialized = 1;
- return 1;
-}
-EXPORT_SYMBOL_GPL(fsl_dma_configure);
+ strcpy(dma->path, np->full_name);
+ dma->dai.name = dma->path;
+ dma->dai.ops = &fsl_dma_ops;
+ dma->dai.pcm_new = fsl_dma_new;
+ dma->dai.pcm_free = fsl_dma_free_dma_buffers;
-static int __devinit fsl_soc_platform_probe(struct platform_device *pdev)
-{
- return snd_soc_register_platform(&pdev->dev, -1, &fsl_soc_platform);
+ ret = snd_soc_register_platform(&of_dev->dev, 0, &dma->dai);
+ if (ret) {
+ dev_err(&of_dev->dev, "could not register platform\n");
+ kfree(dma);
+ return ret;
+ }
+
+ dma->channel = of_iomap(np, 0);
+ dma->irq = irq_of_parse_and_map(np, 0);
+ list_add(&dma->list, &dma_list);
+
+ return 0;
}
-static int __devexit fsl_soc_platform_remove(struct platform_device *pdev)
+static int __devexit fsl_soc_dma_remove(struct of_device *of_dev)
{
- snd_soc_unregister_platform(&pdev->dev, -1);
+ struct list_head *n, *ptr;
+ struct dma_object *dma;
+
+ list_for_each_safe(ptr, n, &dma_list) {
+ dma = list_entry(ptr, struct dma_object, list);
+ list_del_init(ptr);
+
+ snd_soc_unregister_platform(&of_dev->dev, 0);
+ iounmap(dma->channel);
+ irq_dispose_mapping(dma->irq);
+ kfree(dma);
+ }
+
return 0;
}
-static struct platform_driver fsl_pcm_driver = {
- .driver = {
- .name = "fsl-pcm-audio",
- .owner = THIS_MODULE,
- },
- .probe = fsl_soc_platform_probe,
- .remove = __devexit_p(fsl_soc_platform_remove),
+static const struct of_device_id fsl_soc_dma_ids[] = {
+ { .compatible = "fsl,ssi-dma-channel", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, fsl_soc_dma_ids);
+
+static struct of_platform_driver fsl_soc_dma_driver = {
+ .name = "fsl-soc-dma-dai",
+ .match_table = fsl_soc_dma_ids,
+ .probe = fsl_soc_dma_probe,
+ .remove = __devexit_p(fsl_soc_dma_remove),
};
-static int __init snd_fsl_pcm_init(void)
+static int __init fsl_soc_dma_init(void)
{
- return platform_driver_register(&fsl_pcm_driver);
+ pr_info("Freescale Elo DMA ASoC PCM Driver\n");
+
+ return of_register_platform_driver(&fsl_soc_dma_driver);
}
-module_init(snd_fsl_pcm_init);
-static void __exit snd_fsl_pcm_exit(void)
+static void __exit fsl_soc_dma_exit(void)
{
- platform_driver_unregister(&fsl_pcm_driver);
+ of_unregister_platform_driver(&fsl_soc_dma_driver);
}
-module_exit(snd_fsl_pcm_exit);
+
+/* We want the DMA driver to be initialized before the SSI driver, so that
+ * when the SSI driver calls fsl_soc_dma_dai_from_node(), the DMA driver
+ * will already have been probed. The easiest way to do that is to make the
+ * __init function called via arch_initcall().
+ */
+arch_initcall(fsl_soc_dma_init);
+module_exit(fsl_soc_dma_exit);
MODULE_AUTHOR("Timur Tabi <timur at freescale.com>");
-MODULE_DESCRIPTION("Freescale Elo DMA ASoC PCM module");
-MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Freescale Elo DMA ASoC PCM Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/fsl/fsl_dma.h b/sound/soc/fsl/fsl_dma.h
index 253bd3c..88c686d 100644
--- a/sound/soc/fsl/fsl_dma.h
+++ b/sound/soc/fsl/fsl_dma.h
@@ -126,24 +126,9 @@ struct fsl_dma_link_descriptor {
u8 res[4]; /* Reserved */
} __attribute__ ((aligned(32), packed));
-/* DMA information needed to create a snd_soc_dai object
- *
- * ssi_stx_phys: bus address of SSI STX register to use
- * ssi_srx_phys: bus address of SSI SRX register to use
- * dma[0]: points to the DMA channel to use for playback
- * dma[1]: points to the DMA channel to use for capture
- * dma_irq[0]: IRQ of the DMA channel to use for playback
- * dma_irq[1]: IRQ of the DMA channel to use for capture
- */
-struct fsl_dma_info {
- dma_addr_t ssi_stx_phys;
- dma_addr_t ssi_srx_phys;
- struct ccsr_dma_channel __iomem *dma_channel[2];
- unsigned int dma_irq[2];
-};
-
extern struct snd_soc_platform_driver fsl_soc_platform;
-int fsl_dma_configure(struct fsl_dma_info *dma_info);
+struct snd_soc_platform_driver *fsl_soc_dma_to_dai(const char *path,
+ dma_addr_t ssi_stx_phys, dma_addr_t ssi_srx_phys);
#endif
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 780e243..56e66c2 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -3,10 +3,11 @@
*
* Author: Timur Tabi <timur at freescale.com>
*
- * Copyright 2007-2008 Freescale Semiconductor, Inc. This file is licensed
- * under the terms of the GNU General Public License version 2. This
- * program is licensed "as is" without any warranty of any kind, whether
- * express or implied.
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
*/
#include <linux/init.h>
@@ -14,6 +15,7 @@
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/of_platform.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -70,33 +72,31 @@
/**
* fsl_ssi_private: per-SSI private data
*
- * @name: short name for this device ("SSI0", "SSI1", etc)
* @ssi: pointer to the SSI's registers
* @ssi_phys: physical address of the SSI registers
* @irq: IRQ of this SSI
* @first_stream: pointer to the stream that was opened first
* @second_stream: pointer to second stream
- * @dev: struct device pointer
* @playback: the number of playback streams opened
* @capture: the number of capture streams opened
* @asynchronous: 0=synchronous mode, 1=asynchronous mode
* @cpu_dai: the CPU DAI for this device
* @dev_attr: the sysfs device attribute structure
* @stats: SSI statistics
+ * @name: name for this device
*/
struct fsl_ssi_private {
- char name[8];
struct ccsr_ssi __iomem *ssi;
dma_addr_t ssi_phys;
unsigned int irq;
struct snd_pcm_substream *first_stream;
struct snd_pcm_substream *second_stream;
- struct device *dev;
unsigned int playback;
unsigned int capture;
int asynchronous;
struct snd_soc_dai_driver cpu_dai_drv;
struct device_attribute dev_attr;
+ struct platform_device *pdev;
struct {
unsigned int rfrc;
@@ -121,6 +121,8 @@ struct fsl_ssi_private {
unsigned int tfe1;
unsigned int tfe0;
} stats;
+
+ char name[1];
};
/**
@@ -289,8 +291,10 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream,
struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
int ret;
+ /* The 'name' should not have any slashes in it. */
ret = request_irq(ssi_private->irq, fsl_ssi_isr, 0,
- ssi_private->name, ssi_private);
+ strrchr(ssi_private->name, '/') + 1,
+ ssi_private);
if (ret < 0) {
dev_err(substream->pcm->card->dev,
"could not claim irq %u\n", ssi_private->irq);
@@ -522,56 +526,15 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream,
}
}
-/**
- * fsl_ssi_set_sysclk: set the clock frequency and direction
- *
- * This function is called by the machine driver to tell us what the clock
- * frequency and direction are.
- *
- * Currently, we only support operating as a clock slave (SND_SOC_CLOCK_IN),
- * and we don't care about the frequency. Return an error if the direction
- * is not SND_SOC_CLOCK_IN.
- *
- * @clk_id: reserved, should be zero
- * @freq: the frequency of the given clock ID, currently ignored
- * @dir: SND_SOC_CLOCK_IN (clock slave) or SND_SOC_CLOCK_OUT (clock master)
- */
-static int fsl_ssi_set_sysclk(struct snd_soc_dai *cpu_dai,
- int clk_id, unsigned int freq, int dir)
-{
-
- return (dir == SND_SOC_CLOCK_IN) ? 0 : -EINVAL;
-}
-
-/**
- * fsl_ssi_set_fmt: set the serial format.
- *
- * This function is called by the machine driver to tell us what serial
- * format to use.
- *
- * Currently, we only support I2S mode. Return an error if the format is
- * not SND_SOC_DAIFMT_I2S.
- *
- * @format: one of SND_SOC_DAIFMT_xxx
- */
-static int fsl_ssi_set_fmt(struct snd_soc_dai *cpu_dai, unsigned int format)
-{
- return (format == SND_SOC_DAIFMT_I2S) ? 0 : -EINVAL;
-}
-
-/**
- * fsl_ssi_dai_template: template CPU DAI for the SSI
- */
static struct snd_soc_dai_ops fsl_ssi_dai_ops = {
.startup = fsl_ssi_startup,
.hw_params = fsl_ssi_hw_params,
.shutdown = fsl_ssi_shutdown,
.trigger = fsl_ssi_trigger,
- .set_sysclk = fsl_ssi_set_sysclk,
- .set_fmt = fsl_ssi_set_fmt,
};
-struct snd_soc_dai_driver fsl_ssi_dai = {
+/* Template for the CPU dai driver structure */
+static struct snd_soc_dai_driver fsl_ssi_dai_template = {
.playback = {
/* The SSI does not support monaural audio. */
.channels_min = 2,
@@ -587,7 +550,6 @@ struct snd_soc_dai_driver fsl_ssi_dai = {
},
.ops = &fsl_ssi_dai_ops,
};
-EXPORT_SYMBOL_GPL(fsl_ssi_dai);
/* Show the statistics of a flag only if its interrupt is enabled. The
* compiler will optimze this code to a no-op if the interrupt is not
@@ -639,92 +601,163 @@ static ssize_t fsl_sysfs_ssi_show(struct device *dev,
return length;
}
-static int fsl_ssi_probe(struct platform_device *pdev)
+/**
+ * Make every character in a string lower-case
+ */
+static void make_lowercase(char *s)
+{
+ char *p = s;
+ char c;
+
+ while ((c = *p)) {
+ if ((c >= 'A') && (c <= 'Z'))
+ *p = c + ('a' - 'A');
+ p++;
+ }
+}
+
+static int __devinit fsl_ssi_probe(struct of_device *of_dev,
+ const struct of_device_id *match)
{
- struct fsl_ssi_info *ssi_info = dev_get_platdata(&pdev->dev);
struct fsl_ssi_private *ssi_private;
int ret = 0;
struct device_attribute *dev_attr;
+ struct device_node *np = of_dev->node;
+ const char *sprop;
+ struct resource res;
+ char name[64];
+ struct platform_device *pdev;
+ void *platform_data;
+
+ /* We are only interested in SSIs with a codec phandle in them, so let's
+ * make sure this SSI has one.
+ */
+ if (!of_get_property(np, "codec-handle", NULL))
+ return -ENODEV;
+
+ /* We only support the SSI in "I2S Slave" mode */
+ sprop = of_get_property(np, "fsl,mode", NULL);
+ if (!sprop || strcmp(sprop, "i2s-slave")) {
+ dev_notice(&of_dev->dev, "mode %s is unsupported\n", sprop);
+ return -ENODEV;
+ }
- ssi_private = kzalloc(sizeof(struct fsl_ssi_private), GFP_KERNEL);
+ ssi_private = kzalloc(sizeof(struct fsl_ssi_private) +
+ strlen(np->full_name), GFP_KERNEL);
if (!ssi_private) {
- dev_err(ssi_info->dev, "could not allocate DAI object\n");
+ dev_err(&of_dev->dev, "could not allocate DAI object\n");
return -ENOMEM;
}
- dev_attr = &ssi_private->dev_attr;
+ /* Initialize this copy of the CPU DAI driver structure */
+ memcpy(&ssi_private->cpu_dai_drv, &fsl_ssi_dai_template,
+ sizeof(fsl_ssi_dai_template));
+ ssi_private->cpu_dai_drv.name = ssi_private->name;
+
+ /* The name we register with ASoC is the full node name */
+ strlcpy(ssi_private->name, np->full_name, sizeof(ssi_private->name));
+
+ /* Get the addresses and IRQ */
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret) {
+ dev_err(&of_dev->dev, "could not determine device resources\n");
+ kfree(ssi_private);
+ return ret;
+ }
+ ssi_private->ssi = ioremap(res.start, 1 + res.end - res.start);
+ ssi_private->ssi_phys = res.start;
+ ssi_private->irq = irq_of_parse_and_map(np, 0);
- sprintf(ssi_private->name, "ssi%u", (u8) ssi_info->id);
- ssi_private->ssi = ssi_info->ssi;
- ssi_private->ssi_phys = ssi_info->ssi_phys;
- ssi_private->irq = ssi_info->irq;
- ssi_private->dev = ssi_info->dev;
- ssi_private->asynchronous = ssi_info->asynchronous;
+ /* Are the RX and the TX clocks locked? */
+ if (of_find_property(np, "fsl,ssi-asynchronous", NULL))
+ ssi_private->asynchronous = 1;
+ else
+ ssi_private->cpu_dai_drv.symmetric_rates = 1;
/* Initialize the the device_attribute structure */
- dev_attr->attr.name = "ssi-stats";
+ dev_attr = &ssi_private->dev_attr;
+ dev_attr->attr.name = "statistics";
dev_attr->attr.mode = S_IRUGO;
dev_attr->show = fsl_sysfs_ssi_show;
- ret = device_create_file(ssi_private->dev, dev_attr);
+ ret = device_create_file(&of_dev->dev, dev_attr);
if (ret) {
- dev_err(ssi_info->dev, "could not create sysfs %s file\n",
+ dev_err(&of_dev->dev, "could not create sysfs %s file\n",
ssi_private->dev_attr.attr.name);
kfree(ssi_private);
return ret;
}
- dev_set_drvdata(ssi_private->dev, ssi_private);
- fsl_ssi_dai.name = ssi_private->name;
- fsl_ssi_dai.symmetric_rates = 1;
+ /* Register with ASoC */
+ dev_set_drvdata(&of_dev->dev, ssi_private);
- ret = snd_soc_register_dai(ssi_private->dev, ssi_info->id, &fsl_ssi_dai);
+ ret = snd_soc_register_dai(&of_dev->dev, 0, &ssi_private->cpu_dai_drv);
if (ret != 0) {
- dev_err(ssi_info->dev, "failed to register DAI: %d\n", ret);
+ dev_err(&of_dev->dev, "failed to register DAI: %d\n", ret);
kfree(ssi_private);
return ret;
}
- return ret;
+ /* Trigger the machine driver's probe function. The platform driver
+ * name of the machine driver is taken from the /model node of the
+ * device tree. We also pass the address of the CPU DAI driver
+ * structure.
+ */
+ sprop = of_get_property(of_find_node_by_path("/"), "model", NULL);
+ snprintf(name, sizeof(name), "snd-soc-%s", sprop);
+ make_lowercase(name);
+
+ platform_data = &ssi_private->cpu_dai_drv;
+ pdev = platform_device_register_data(&of_dev->dev, name, -1,
+ &platform_data, sizeof(void *));
+
+ ssi_private->pdev = pdev;
+
+ return 0;
}
/**
* fsl_ssi_destroy_dai: destroy the snd_soc_dai object
*
- * This function undoes the operations of fsl_ssi_create_dai()
+ * This function undoes the operations of fsl_ssi_probe()
*/
-static int fsl_ssi_remove(struct platform_device *pdev)
+static int fsl_ssi_remove(struct of_device *of_dev)
{
- struct fsl_ssi_private *ssi_private = dev_get_drvdata(&pdev->dev);
- struct fsl_ssi_info *ssi_info = dev_get_platdata(&pdev->dev);
-
- device_remove_file(ssi_private->dev, &ssi_private->dev_attr);
+ struct fsl_ssi_private *ssi_private = dev_get_drvdata(&of_dev->dev);
- snd_soc_unregister_dai(&pdev->dev, ssi_info->id);
+ platform_device_unregister(ssi_private->pdev);
+ snd_soc_unregister_dai(&of_dev->dev, 0);
+ device_remove_file(&of_dev->dev, &ssi_private->dev_attr);
kfree(ssi_private);
+ dev_set_drvdata(&of_dev->dev, NULL);
+
return 0;
}
-static struct platform_driver fsl_ssi_driver = {
+static const struct of_device_id fsl_ssi_ids[] = {
+ { .compatible = "fsl,mpc8610-ssi", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, fsl_ssi_ids);
+
+static struct of_platform_driver fsl_ssi_driver = {
+ .name = "fsl-ssi-dai",
+ .match_table = fsl_ssi_ids,
.probe = fsl_ssi_probe,
- .remove = __devexit_p(fsl_ssi_remove),
- .driver = {
- .name = "fsl-ssi-dai",
- .owner = THIS_MODULE,
- },
+ .remove = fsl_ssi_remove,
};
static int __init fsl_ssi_init(void)
{
printk(KERN_INFO "Freescale Synchronous Serial Interface (SSI) ASoC Driver\n");
- return platform_driver_register(&fsl_ssi_driver);
+ return of_register_platform_driver(&fsl_ssi_driver);
}
static void __exit fsl_ssi_exit(void)
{
- platform_driver_unregister(&fsl_ssi_driver);
+ of_unregister_platform_driver(&fsl_ssi_driver);
}
module_init(fsl_ssi_init);
@@ -732,4 +765,4 @@ module_exit(fsl_ssi_exit);
MODULE_AUTHOR("Timur Tabi <timur at freescale.com>");
MODULE_DESCRIPTION("Freescale Synchronous Serial Interface (SSI) ASoC Driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/fsl/fsl_ssi.h b/sound/soc/fsl/fsl_ssi.h
index 965fd86..2173000 100644
--- a/sound/soc/fsl/fsl_ssi.h
+++ b/sound/soc/fsl/fsl_ssi.h
@@ -196,30 +196,5 @@ struct ccsr_ssi {
#define CCSR_SSI_SOR_WAIT(x) (((x) & 3) << CCSR_SSI_SOR_WAIT_SHIFT)
#define CCSR_SSI_SOR_SYNRST 0x00000001
-/* Instantiation data for an SSI interface
- *
- * This structure contains all the information that the the SSI driver needs
- * to instantiate an SSI interface with ALSA. The machine driver should
- * create this structure, fill it in, call fsl_ssi_create_dai(), and then
- * delete the structure.
- *
- * id: which SSI this is (0, 1, etc. )
- * ssi: pointer to the SSI's registers
- * ssi_phys: physical address of the SSI registers
- * irq: IRQ of this SSI
- * dev: struct device, used to create the sysfs statistics file
- * asynchronous: 0=synchronous mode, 1=asynchronous mode
-*/
-struct fsl_ssi_info {
- unsigned int id;
- struct ccsr_ssi __iomem *ssi;
- dma_addr_t ssi_phys;
- unsigned int irq;
- struct device *dev;
- int asynchronous;
-};
-
-extern struct snd_soc_dai_driver fsl_ssi_dai;
-
#endif
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
dissimilarity index 62%
index ad8d763..3e422f7 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -1,616 +1,558 @@
-/**
- * Freescale MPC8610HPCD ALSA SoC Fabric driver
- *
- * Author: Timur Tabi <timur at freescale.com>
- *
- * Copyright 2007-2008 Freescale Semiconductor, Inc. This file is licensed
- * under the terms of the GNU General Public License version 2. This
- * program is licensed "as is" without any warranty of any kind, whether
- * express or implied.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
-#include <sound/soc.h>
-#include <asm/immap_86xx.h>
-
-#include "../codecs/cs4270.h"
-#include "fsl_dma.h"
-#include "fsl_ssi.h"
-
-/**
- * mpc8610_hpcd_data: fabric-specific ASoC device data
- *
- * This structure contains data for a single sound platform device on an
- * MPC8610 HPCD. Some of the data is taken from the device tree.
- */
-struct mpc8610_hpcd_data {
- struct snd_soc_dai_link dai;
- struct snd_soc_card machine;
- unsigned int dai_format;
- unsigned int codec_clk_direction;
- unsigned int cpu_clk_direction;
- unsigned int clk_frequency;
- struct ccsr_guts __iomem *guts;
- struct ccsr_ssi __iomem *ssi;
- unsigned int ssi_id; /* 0 = SSI1, 1 = SSI2, etc */
- unsigned int ssi_irq;
- unsigned int dma_id; /* 0 = DMA1, 1 = DMA2, etc */
- unsigned int dma_irq[2];
- struct ccsr_dma_channel __iomem *dma[2];
- unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/
-};
-
-/**
- * mpc8610_hpcd_machine_probe: initalize the board
- *
- * This function is called when platform_device_add() is called. It is used
- * to initialize the board-specific hardware.
- *
- * Here we program the DMACR and PMUXCR registers.
- */
-static int mpc8610_hpcd_machine_probe(struct platform_device *sound_device)
-{
- struct mpc8610_hpcd_data *machine_data =
- sound_device->dev.platform_data;
-
- /* Program the signal routing between the SSI and the DMA */
- guts_set_dmacr(machine_data->guts, machine_data->dma_id,
- machine_data->dma_channel_id[0], CCSR_GUTS_DMACR_DEV_SSI);
- guts_set_dmacr(machine_data->guts, machine_data->dma_id,
- machine_data->dma_channel_id[1], CCSR_GUTS_DMACR_DEV_SSI);
-
- guts_set_pmuxcr_dma(machine_data->guts, machine_data->dma_id,
- machine_data->dma_channel_id[0], 0);
- guts_set_pmuxcr_dma(machine_data->guts, machine_data->dma_id,
- machine_data->dma_channel_id[1], 0);
-
- switch (machine_data->ssi_id) {
- case 0:
- clrsetbits_be32(&machine_data->guts->pmuxcr,
- CCSR_GUTS_PMUXCR_SSI1_MASK, CCSR_GUTS_PMUXCR_SSI1_SSI);
- break;
- case 1:
- clrsetbits_be32(&machine_data->guts->pmuxcr,
- CCSR_GUTS_PMUXCR_SSI2_MASK, CCSR_GUTS_PMUXCR_SSI2_SSI);
- break;
- }
-
- return 0;
-}
-
-/**
- * mpc8610_hpcd_startup: program the board with various hardware parameters
- *
- * This function takes board-specific information, like clock frequencies
- * and serial data formats, and passes that information to the codec and
- * transport drivers.
- */
-static int mpc8610_hpcd_startup(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- struct mpc8610_hpcd_data *machine_data =
- rtd->card->dev->platform_data;
- int ret = 0;
-
- /* Tell the CPU driver what the serial protocol is. */
- ret = snd_soc_dai_set_fmt(cpu_dai, machine_data->dai_format);
- if (ret < 0) {
- dev_err(substream->pcm->card->dev,
- "could not set CPU driver audio format\n");
- return ret;
- }
-
- /* Tell the codec driver what the serial protocol is. */
- ret = snd_soc_dai_set_fmt(codec_dai, machine_data->dai_format);
- if (ret < 0) {
- dev_err(substream->pcm->card->dev,
- "could not set codec driver audio format\n");
- return ret;
- }
-
- /*
- * Tell the CPU driver what the clock frequency is, and whether it's a
- * slave or master.
- */
- ret = snd_soc_dai_set_sysclk(cpu_dai, 0,
- machine_data->clk_frequency,
- machine_data->cpu_clk_direction);
- if (ret < 0) {
- dev_err(substream->pcm->card->dev,
- "could not set CPU driver clock parameters\n");
- return ret;
- }
-
- /*
- * Tell the codec driver what the MCLK frequency is, and whether it's
- * a slave or master.
- */
- ret = snd_soc_dai_set_sysclk(codec_dai, 0,
- machine_data->clk_frequency,
- machine_data->codec_clk_direction);
- if (ret < 0) {
- dev_err(substream->pcm->card->dev,
- "could not set codec driver clock params\n");
- return ret;
- }
-
- return 0;
-}
-
-/**
- * mpc8610_hpcd_machine_remove: Remove the sound device
- *
- * This function is called to remove the sound device for one SSI. We
- * de-program the DMACR and PMUXCR register.
- */
-int mpc8610_hpcd_machine_remove(struct platform_device *sound_device)
-{
- struct mpc8610_hpcd_data *machine_data =
- sound_device->dev.platform_data;
-
- /* Restore the signal routing */
-
- guts_set_dmacr(machine_data->guts, machine_data->dma_id,
- machine_data->dma_channel_id[0], 0);
- guts_set_dmacr(machine_data->guts, machine_data->dma_id,
- machine_data->dma_channel_id[1], 0);
-
- switch (machine_data->ssi_id) {
- case 0:
- clrsetbits_be32(&machine_data->guts->pmuxcr,
- CCSR_GUTS_PMUXCR_SSI1_MASK, CCSR_GUTS_PMUXCR_SSI1_LA);
- break;
- case 1:
- clrsetbits_be32(&machine_data->guts->pmuxcr,
- CCSR_GUTS_PMUXCR_SSI2_MASK, CCSR_GUTS_PMUXCR_SSI2_LA);
- break;
- }
-
- return 0;
-}
-
-/**
- * mpc8610_hpcd_ops: ASoC fabric driver operations
- */
-static struct snd_soc_ops mpc8610_hpcd_ops = {
- .startup = mpc8610_hpcd_startup,
-};
-
-/**
- * mpc8610_hpcd_probe: OF probe function for the fabric driver
- *
- * This function gets called when an SSI node is found in the device tree.
- *
- * Although this is a fabric driver, the SSI node is the "master" node with
- * respect to audio hardware connections. Therefore, we create a new ASoC
- * device for each new SSI node that has a codec attached.
- *
- * FIXME: Currently, we only support one DMA controller, so if there are
- * multiple SSI nodes with codecs, only the first will be supported.
- *
- * FIXME: Even if we did support multiple DMA controllers, we have no
- * mechanism for assigning DMA controllers and channels to the individual
- * SSI devices. We also probably aren't compatible with the generic Elo DMA
- * device driver.
- */
-static int mpc8610_hpcd_probe(struct of_device *ofdev,
- const struct of_device_id *match)
-{
- struct device_node *np = ofdev->node;
- struct device_node *codec_np = NULL;
- struct device_node *guts_np = NULL;
- struct device_node *dma_np = NULL;
- struct device_node *dma_channel_np = NULL;
- const phandle *codec_ph;
- const char *sprop;
- const u32 *iprop;
- struct resource res;
- struct platform_device *sound_device = NULL;
- struct mpc8610_hpcd_data *machine_data;
- struct fsl_ssi_info ssi_info;
- struct fsl_dma_info dma_info;
- int ret = -ENODEV;
- unsigned int playback_dma_channel;
- unsigned int capture_dma_channel;
-
- machine_data = kzalloc(sizeof(struct mpc8610_hpcd_data), GFP_KERNEL);
- if (!machine_data)
- return -ENOMEM;
-
- memset(&ssi_info, 0, sizeof(ssi_info));
- memset(&dma_info, 0, sizeof(dma_info));
-
- ssi_info.dev = &ofdev->dev;
-
- /*
- * We are only interested in SSIs with a codec phandle in them, so let's
- * make sure this SSI has one.
- */
- codec_ph = of_get_property(np, "codec-handle", NULL);
- if (!codec_ph)
- goto error;
-
- codec_np = of_find_node_by_phandle(*codec_ph);
- if (!codec_np)
- goto error;
-
- /* The MPC8610 HPCD only knows about the CS4270 codec, so reject
- anything else. */
- if (!of_device_is_compatible(codec_np, "cirrus,cs4270"))
- goto error;
-
- /* Get the device ID */
- iprop = of_get_property(np, "cell-index", NULL);
- if (!iprop) {
- dev_err(&ofdev->dev, "cell-index property not found\n");
- ret = -EINVAL;
- goto error;
- }
- machine_data->ssi_id = *iprop;
- ssi_info.id = *iprop;
-
- /* Get the serial format and clock direction. */
- sprop = of_get_property(np, "fsl,mode", NULL);
- if (!sprop) {
- dev_err(&ofdev->dev, "fsl,mode property not found\n");
- ret = -EINVAL;
- goto error;
- }
-
- if (strcasecmp(sprop, "i2s-slave") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_I2S;
- machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
- machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
-
- /*
- * In i2s-slave mode, the codec has its own clock source, so we
- * need to get the frequency from the device tree and pass it to
- * the codec driver.
- */
- iprop = of_get_property(codec_np, "clock-frequency", NULL);
- if (!iprop || !*iprop) {
- dev_err(&ofdev->dev, "codec bus-frequency property "
- "is missing or invalid\n");
- ret = -EINVAL;
- goto error;
- }
- machine_data->clk_frequency = *iprop;
- } else if (strcasecmp(sprop, "i2s-master") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_I2S;
- machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
- machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
- } else if (strcasecmp(sprop, "lj-slave") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J;
- machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
- machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
- } else if (strcasecmp(sprop, "lj-master") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J;
- machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
- machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
- } else if (strcasecmp(sprop, "rj-slave") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J;
- machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
- machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
- } else if (strcasecmp(sprop, "rj-master") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J;
- machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
- machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
- } else if (strcasecmp(sprop, "ac97-slave") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_AC97;
- machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
- machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
- } else if (strcasecmp(sprop, "ac97-master") == 0) {
- machine_data->dai_format = SND_SOC_DAIFMT_AC97;
- machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
- machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
- } else {
- dev_err(&ofdev->dev,
- "unrecognized fsl,mode property \"%s\"\n", sprop);
- ret = -EINVAL;
- goto error;
- }
-
- if (!machine_data->clk_frequency) {
- dev_err(&ofdev->dev, "unknown clock frequency\n");
- ret = -EINVAL;
- goto error;
- }
-
- /* Read the SSI information from the device tree */
- ret = of_address_to_resource(np, 0, &res);
- if (ret) {
- dev_err(&ofdev->dev, "could not obtain SSI address\n");
- goto error;
- }
- if (!res.start) {
- dev_err(&ofdev->dev, "invalid SSI address\n");
- goto error;
- }
- ssi_info.ssi_phys = res.start;
-
- machine_data->ssi = ioremap(ssi_info.ssi_phys, sizeof(struct ccsr_ssi));
- if (!machine_data->ssi) {
- dev_err(&ofdev->dev, "could not map SSI address %x\n",
- ssi_info.ssi_phys);
- ret = -EINVAL;
- goto error;
- }
- ssi_info.ssi = machine_data->ssi;
-
-
- /* Get the IRQ of the SSI */
- machine_data->ssi_irq = irq_of_parse_and_map(np, 0);
- if (!machine_data->ssi_irq) {
- dev_err(&ofdev->dev, "could not get SSI IRQ\n");
- ret = -EINVAL;
- goto error;
- }
- ssi_info.irq = machine_data->ssi_irq;
-
- /* Do we want to use asynchronous mode? */
- ssi_info.asynchronous =
- of_find_property(np, "fsl,ssi-asynchronous", NULL) ? 1 : 0;
- if (ssi_info.asynchronous)
- dev_info(&ofdev->dev, "using asynchronous mode\n");
-
- /* Map the global utilities registers. */
- guts_np = of_find_compatible_node(NULL, NULL, "fsl,mpc8610-guts");
- if (!guts_np) {
- dev_err(&ofdev->dev, "could not obtain address of GUTS\n");
- ret = -EINVAL;
- goto error;
- }
- machine_data->guts = of_iomap(guts_np, 0);
- of_node_put(guts_np);
- if (!machine_data->guts) {
- dev_err(&ofdev->dev, "could not map GUTS\n");
- ret = -EINVAL;
- goto error;
- }
-
- /* Find the DMA channels to use. Both SSIs need to use the same DMA
- * controller, so let's use DMA#1.
- */
- for_each_compatible_node(dma_np, NULL, "fsl,mpc8610-dma") {
- iprop = of_get_property(dma_np, "cell-index", NULL);
- if (iprop && (*iprop == 0)) {
- of_node_put(dma_np);
- break;
- }
- }
- if (!dma_np) {
- dev_err(&ofdev->dev, "could not find DMA node\n");
- ret = -EINVAL;
- goto error;
- }
- machine_data->dma_id = *iprop;
-
- /* SSI1 needs to use DMA Channels 0 and 1, and SSI2 needs to use DMA
- * channels 2 and 3. This is just how the MPC8610 is wired
- * internally.
- */
- playback_dma_channel = (machine_data->ssi_id == 0) ? 0 : 2;
- capture_dma_channel = (machine_data->ssi_id == 0) ? 1 : 3;
-
- /*
- * Find the DMA channels to use.
- */
- while ((dma_channel_np = of_get_next_child(dma_np, dma_channel_np))) {
- iprop = of_get_property(dma_channel_np, "cell-index", NULL);
- if (iprop && (*iprop == playback_dma_channel)) {
- /* dma_channel[0] and dma_irq[0] are for playback */
- dma_info.dma_channel[0] = of_iomap(dma_channel_np, 0);
- dma_info.dma_irq[0] =
- irq_of_parse_and_map(dma_channel_np, 0);
- machine_data->dma_channel_id[0] = *iprop;
- continue;
- }
- if (iprop && (*iprop == capture_dma_channel)) {
- /* dma_channel[1] and dma_irq[1] are for capture */
- dma_info.dma_channel[1] = of_iomap(dma_channel_np, 0);
- dma_info.dma_irq[1] =
- irq_of_parse_and_map(dma_channel_np, 0);
- machine_data->dma_channel_id[1] = *iprop;
- continue;
- }
- }
- if (!dma_info.dma_channel[0] || !dma_info.dma_channel[1] ||
- !dma_info.dma_irq[0] || !dma_info.dma_irq[1]) {
- dev_err(&ofdev->dev, "could not find DMA channels\n");
- ret = -EINVAL;
- goto error;
- }
-
- dma_info.ssi_stx_phys = ssi_info.ssi_phys +
- offsetof(struct ccsr_ssi, stx0);
- dma_info.ssi_srx_phys = ssi_info.ssi_phys +
- offsetof(struct ccsr_ssi, srx0);
-
- /* We have the DMA information, so tell the DMA driver what it is */
- if (!fsl_dma_configure(&dma_info)) {
- dev_err(&ofdev->dev, "could not instantiate DMA device\n");
- ret = -EBUSY;
- goto error;
- }
-
- /*
- * Initialize our DAI data structure. We should probably get this
- * information from the device tree.
- */
- machine_data->dai.name = "CS4270";
- machine_data->dai.stream_name = "CS4270";
-
- iprop = of_get_property(codec_np, "reg", NULL);
- if (!iprop) {
- dev_err(&ofdev->dev, "codec node is missing 'reg' property\n");
- goto error;
- }
- machine_data->dai.codec_id = *iprop;
-
- machine_data->dai.cpu_dai_drv = &fsl_ssi_dai;
- machine_data->dai.codec_dai_drv = &cs4270_dai; /* The codec_dai we want */
- machine_data->dai.codec_drv = &soc_codec_device_cs4270;
- machine_data->dai.ops = &mpc8610_hpcd_ops;
- machine_data->dai.platform_drv = &fsl_soc_platform;
-
- machine_data->machine.probe = mpc8610_hpcd_machine_probe;
- machine_data->machine.remove = mpc8610_hpcd_machine_remove;
- machine_data->machine.name = "MPC8610 HPCD";
- machine_data->machine.num_links = 1;
- machine_data->machine.dai_link = &machine_data->dai;
-
- /* Allocate a new audio platform device structure */
- sound_device = platform_device_alloc("soc-audio", -1);
- if (!sound_device) {
- dev_err(&ofdev->dev, "platform device allocation failed\n");
- ret = -ENOMEM;
- goto error;
- }
-
- /* Set the platform device and ASoC device to point to each other */
- platform_set_drvdata(sound_device, &machine_data->machine);
-
- /* Tell ASoC to probe us. This will call mpc8610_hpcd_machine.probe(),
- if it exists. */
- ret = platform_device_add(sound_device);
-
- if (ret) {
- dev_err(&ofdev->dev, "platform device add failed\n");
- goto error;
- }
-
- dev_set_drvdata(&ofdev->dev, sound_device);
-
- return 0;
-
-error:
- of_node_put(codec_np);
- of_node_put(guts_np);
- of_node_put(dma_np);
- of_node_put(dma_channel_np);
-
- if (sound_device)
- platform_device_unregister(sound_device);
-
- if (ssi_info.ssi)
- iounmap(ssi_info.ssi);
-
- if (ssi_info.irq)
- irq_dispose_mapping(ssi_info.irq);
-
- if (dma_info.dma_channel[0])
- iounmap(dma_info.dma_channel[0]);
-
- if (dma_info.dma_channel[1])
- iounmap(dma_info.dma_channel[1]);
-
- if (dma_info.dma_irq[0])
- irq_dispose_mapping(dma_info.dma_irq[0]);
-
- if (dma_info.dma_irq[1])
- irq_dispose_mapping(dma_info.dma_irq[1]);
-
- if (machine_data->guts)
- iounmap(machine_data->guts);
-
- kfree(machine_data);
-
- return ret;
-}
-
-/**
- * mpc8610_hpcd_remove: remove the OF device
- *
- * This function is called when the OF device is removed.
- */
-static int mpc8610_hpcd_remove(struct of_device *ofdev)
-{
- struct platform_device *sound_device = dev_get_drvdata(&ofdev->dev);
- struct mpc8610_hpcd_data *machine_data =
- sound_device->dev.platform_data;
-
- platform_device_unregister(sound_device);
-
- if (machine_data->ssi)
- iounmap(machine_data->ssi);
-
- if (machine_data->dma[0])
- iounmap(machine_data->dma[0]);
-
- if (machine_data->dma[1])
- iounmap(machine_data->dma[1]);
-
- if (machine_data->dma_irq[0])
- irq_dispose_mapping(machine_data->dma_irq[0]);
-
- if (machine_data->dma_irq[1])
- irq_dispose_mapping(machine_data->dma_irq[1]);
-
- if (machine_data->guts)
- iounmap(machine_data->guts);
-
- kfree(machine_data);
- sound_device->dev.platform_data = NULL;
-
- dev_set_drvdata(&ofdev->dev, NULL);
-
- return 0;
-}
-
-static struct of_device_id mpc8610_hpcd_match[] = {
- {
- .compatible = "fsl,mpc8610-ssi",
- },
- {}
-};
-MODULE_DEVICE_TABLE(of, mpc8610_hpcd_match);
-
-static struct of_platform_driver mpc8610_hpcd_of_driver = {
- .owner = THIS_MODULE,
- .name = "mpc8610_hpcd",
- .match_table = mpc8610_hpcd_match,
- .probe = mpc8610_hpcd_probe,
- .remove = mpc8610_hpcd_remove,
-};
-
-/**
- * mpc8610_hpcd_init: fabric driver initialization.
- *
- * This function is called when this module is loaded.
- */
-static int __init mpc8610_hpcd_init(void)
-{
- int ret;
-
- printk(KERN_INFO "Freescale MPC8610 HPCD ALSA SoC fabric driver\n");
-
- ret = of_register_platform_driver(&mpc8610_hpcd_of_driver);
-
- if (ret)
- printk(KERN_ERR
- "mpc8610-hpcd: failed to register platform driver\n");
-
- return ret;
-}
-
-/**
- * mpc8610_hpcd_exit: fabric driver exit
- *
- * This function is called when this driver is unloaded.
- */
-static void __exit mpc8610_hpcd_exit(void)
-{
- of_unregister_platform_driver(&mpc8610_hpcd_of_driver);
-}
-
-module_init(mpc8610_hpcd_init);
-module_exit(mpc8610_hpcd_exit);
-
-MODULE_AUTHOR("Timur Tabi <timur at freescale.com>");
-MODULE_DESCRIPTION("Freescale MPC8610 HPCD ALSA SoC fabric driver");
-MODULE_LICENSE("GPL");
+/**
+ * Freescale MPC8610HPCD ALSA SoC Machine driver
+ *
+ * Author: Timur Tabi <timur at freescale.com>
+ *
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/of_device.h>
+#include <sound/soc.h>
+#include <asm/immap_86xx.h>
+
+#include "../codecs/cs4270.h"
+#include "fsl_dma.h"
+#include "fsl_ssi.h"
+
+/* There's only one global utilities register */
+static phys_addr_t guts_phys;
+
+/**
+ * mpc8610_hpcd_data: machine-specific ASoC device data
+ *
+ * This structure contains data for a single sound platform device on an
+ * MPC8610 HPCD. Some of the data is taken from the device tree.
+ */
+struct mpc8610_hpcd_data {
+ struct snd_soc_dai_link dai[2];
+ struct snd_soc_card card;
+ unsigned int dai_format;
+ unsigned int codec_clk_direction;
+ unsigned int cpu_clk_direction;
+ unsigned int clk_frequency;
+ unsigned int ssi_id; /* 0 = SSI1, 1 = SSI2, etc */
+ unsigned int dma_id[0]; /* 0 = DMA1, 1 = DMA2, etc */
+ unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/
+ char dai_name[32];
+};
+
+/**
+ * mpc8610_hpcd_machine_probe: initialize the board
+ *
+ * This function is used to initialize the board-specific hardware.
+ *
+ * Here we program the DMACR and PMUXCR registers.
+ */
+static int mpc8610_hpcd_machine_probe(struct platform_device *sound_device)
+{
+ struct snd_soc_card *card = platform_get_drvdata(sound_device);
+ struct mpc8610_hpcd_data *machine_data =
+ container_of(card, struct mpc8610_hpcd_data, card);
+ struct ccsr_guts __iomem *guts;
+
+ guts = ioremap(guts_phys, sizeof(struct ccsr_guts));
+ if (!guts) {
+ dev_err(card->dev, "could not map global utilities\n");
+ return -ENOMEM;
+ }
+
+ /* Program the signal routing between the SSI and the DMA */
+ guts_set_dmacr(guts, machine_data->dma_id[0],
+ machine_data->dma_channel_id[0],
+ CCSR_GUTS_DMACR_DEV_SSI);
+ guts_set_dmacr(guts, machine_data->dma_id[1],
+ machine_data->dma_channel_id[1],
+ CCSR_GUTS_DMACR_DEV_SSI);
+
+ guts_set_pmuxcr_dma(guts, machine_data->dma_id[0],
+ machine_data->dma_channel_id[0], 0);
+ guts_set_pmuxcr_dma(guts, machine_data->dma_id[1],
+ machine_data->dma_channel_id[1], 0);
+
+ switch (machine_data->ssi_id) {
+ case 0:
+ clrsetbits_be32(&guts->pmuxcr,
+ CCSR_GUTS_PMUXCR_SSI1_MASK, CCSR_GUTS_PMUXCR_SSI1_SSI);
+ break;
+ case 1:
+ clrsetbits_be32(&guts->pmuxcr,
+ CCSR_GUTS_PMUXCR_SSI2_MASK, CCSR_GUTS_PMUXCR_SSI2_SSI);
+ break;
+ }
+
+ iounmap(guts);
+
+ return 0;
+}
+
+/**
+ * mpc8610_hpcd_startup: program the board with various hardware parameters
+ *
+ * This function takes board-specific information, like clock frequencies
+ * and serial data formats, and passes that information to the codec and
+ * transport drivers.
+ */
+static int mpc8610_hpcd_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct mpc8610_hpcd_data *machine_data =
+ container_of(rtd->card, struct mpc8610_hpcd_data, card);
+ struct device *dev = rtd->card->dev;
+ int ret = 0;
+
+ /* Tell the codec driver what the serial protocol is. */
+ ret = snd_soc_dai_set_fmt(rtd->codec_dai, machine_data->dai_format);
+ if (ret < 0) {
+ dev_err(dev, "could not set codec driver audio format\n");
+ return ret;
+ }
+
+ /*
+ * Tell the codec driver what the MCLK frequency is, and whether it's
+ * a slave or master.
+ */
+ ret = snd_soc_dai_set_sysclk(rtd->codec_dai, 0,
+ machine_data->clk_frequency,
+ machine_data->codec_clk_direction);
+ if (ret < 0) {
+ dev_err(dev, "could not set codec driver clock params\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * mpc8610_hpcd_machine_remove: Remove the sound device
+ *
+ * This function is called to remove the sound device for one SSI. We
+ * de-program the DMACR and PMUXCR register.
+ */
+static int mpc8610_hpcd_machine_remove(struct platform_device *sound_device)
+{
+ struct snd_soc_card *card = platform_get_drvdata(sound_device);
+ struct mpc8610_hpcd_data *machine_data =
+ container_of(card, struct mpc8610_hpcd_data, card);
+ struct ccsr_guts __iomem *guts;
+
+ guts = ioremap(guts_phys, sizeof(struct ccsr_guts));
+ if (!guts) {
+ dev_err(card->dev, "could not map global utilities\n");
+ return -ENOMEM;
+ }
+
+ /* Restore the signal routing */
+
+ guts_set_dmacr(guts, machine_data->dma_id[0],
+ machine_data->dma_channel_id[0], 0);
+ guts_set_dmacr(guts, machine_data->dma_id[1],
+ machine_data->dma_channel_id[1], 0);
+
+ switch (machine_data->ssi_id) {
+ case 0:
+ clrsetbits_be32(&guts->pmuxcr,
+ CCSR_GUTS_PMUXCR_SSI1_MASK, CCSR_GUTS_PMUXCR_SSI1_LA);
+ break;
+ case 1:
+ clrsetbits_be32(&guts->pmuxcr,
+ CCSR_GUTS_PMUXCR_SSI2_MASK, CCSR_GUTS_PMUXCR_SSI2_LA);
+ break;
+ }
+
+ iounmap(guts);
+
+ return 0;
+}
+
+/**
+ * mpc8610_hpcd_ops: ASoC machine driver operations
+ */
+static struct snd_soc_ops mpc8610_hpcd_ops = {
+ .startup = mpc8610_hpcd_startup,
+};
+
+/**
+ * get_node_by_phandle_name - get a node by its phandle name
+ *
+ * This function takes a node, the name of a property in that node, and a
+ * compatible string. Assuming the property is a phandle to another node,
+ * it returns that node, (optionally) if that node is compatible.
+ *
+ * If the property is not a phandle, or the node it points to is not compatible
+ * with the specific string, then NULL is returned.
+ */
+static struct device_node *get_node_by_phandle_name(struct device_node *np,
+ const char *name,
+ const char *compatible)
+{
+ const phandle *ph;
+ int len;
+
+ ph = of_get_property(np, name, &len);
+ if (!ph || (len != sizeof(phandle)))
+ return NULL;
+
+ np = of_find_node_by_phandle(*ph);
+ if (!np)
+ return NULL;
+
+ if (compatible && !of_device_is_compatible(np, compatible)) {
+ of_node_put(np);
+ return NULL;
+ }
+
+ return np;
+}
+
+/**
+ * get_parent_cell_index -- return the cell-index of the parent of a node
+ *
+ * Return the value of the cell-index property of the parent of the given
+ * node. This is used for DMA channel nodes that need to know the DMA ID
+ * of the controller they are on.
+ */
+static int get_parent_cell_index(struct device_node *np)
+{
+ struct device_node *parent = of_get_parent(np);
+ const u32 *iprop;
+
+ if (!parent)
+ return -1;
+
+ iprop = of_get_property(parent, "cell-index", NULL);
+ of_node_put(parent);
+
+ if (!iprop)
+ return -1;
+
+ return *iprop;
+}
+
+static int get_dma_channel(struct device_node *ssi_np,
+ const char *compatible,
+ dma_addr_t ssi_stx_phys,
+ dma_addr_t ssi_srx_phys,
+ struct snd_soc_dai_link *dai,
+ unsigned int *dma_channel_id,
+ unsigned int *dma_id)
+{
+ struct device_node *dma_channel_np;
+ const u32 *iprop;
+
+ dma_channel_np = get_node_by_phandle_name(ssi_np, compatible,
+ "fsl,ssi-dma-channel");
+ if (!dma_channel_np)
+ return -EINVAL;
+
+ dai->platform_drv = fsl_soc_dma_to_dai(dma_channel_np->full_name,
+ ssi_stx_phys, ssi_srx_phys);
+
+ iprop = of_get_property(dma_channel_np, "cell-index", NULL);
+ if (!iprop) {
+ of_node_put(dma_channel_np);
+ return -EINVAL;
+ }
+
+ *dma_channel_id = *iprop;
+ *dma_id = get_parent_cell_index(dma_channel_np);
+ of_node_put(dma_channel_np);
+
+ return 0;
+}
+/**
+ * mpc8610_hpcd_probe: platform probe function for the machine driver
+ *
+ * Although this is a machine driver, the SSI node is the "master" node with
+ * respect to audio hardware connections. Therefore, we create a new ASoC
+ * device for each new SSI node that has a codec attached.
+ */
+static int mpc8610_hpcd_probe(struct platform_device *pdev)
+{
+ struct snd_soc_dai_driver **platform_data = pdev->dev.platform_data;
+ struct snd_soc_dai_driver *cpu_dai_drv = *platform_data;
+ struct device *dev = pdev->dev.parent;
+ struct of_device *of_dev = container_of(dev, struct of_device, dev);
+ struct device_node *np = of_dev->node;
+ struct device_node *codec_np = NULL;
+ struct device_node *dma_np = NULL;
+ struct device_node *dma_channel_np = NULL;
+ struct platform_device *sound_device = NULL;
+ struct mpc8610_hpcd_data *machine_data;
+ int id;
+ dma_addr_t ssi_stx_phys;
+ dma_addr_t ssi_srx_phys;
+ int ret = -ENODEV;
+ const char *sprop;
+ const u32 *iprop;
+ struct resource res;
+
+ /* We are only interested in SSIs with a codec phandle in them,
+ * so let's make sure this SSI has one. The MPC8610 HPCD only
+ * knows about the CS4270 codec, so reject anything else.
+ */
+ codec_np = get_node_by_phandle_name(np, "codec-handle",
+ "cirrus,cs4270");
+ if (!codec_np) {
+ dev_err(dev, "invalid codec node\n");
+ return -EINVAL;
+ }
+
+ machine_data = kzalloc(sizeof(struct mpc8610_hpcd_data), GFP_KERNEL);
+ if (!machine_data)
+ return -ENOMEM;
+
+ machine_data->dai[0].cpu_dai_id = 0;
+ machine_data->dai[0].codec_dai_id = 0;
+ machine_data->dai[0].platform_id = 0;
+
+ machine_data->dai[0].name = machine_data->dai_name;
+
+ machine_data->dai[0].cpu_dai_drv = cpu_dai_drv;
+ machine_data->dai[0].codec_dai_drv = &cs4270_dai;
+ machine_data->dai[0].codec_drv = &soc_codec_device_cs4270;
+ machine_data->dai[0].ops = &mpc8610_hpcd_ops;
+
+ /* Store the codec name, it will be used as the codec DAI name */
+ of_modalias_node(codec_np, machine_data->dai_name,
+ sizeof(machine_data->dai_name));
+
+ memcpy(&machine_data->dai[1], &machine_data->dai[0],
+ sizeof(struct snd_soc_dai_link));
+
+ /* Get the device ID */
+ iprop = of_get_property(np, "cell-index", NULL);
+ if (!iprop) {
+ dev_err(&pdev->dev, "cell-index property not found\n");
+ ret = -EINVAL;
+ goto error;
+ }
+ machine_data->ssi_id = *iprop;
+ id = *iprop;
+
+ /* Get the serial format and clock direction. */
+ sprop = of_get_property(np, "fsl,mode", NULL);
+ if (!sprop) {
+ dev_err(&pdev->dev, "fsl,mode property not found\n");
+ ret = -EINVAL;
+ goto error;
+ }
+
+ if (strcasecmp(sprop, "i2s-slave") == 0) {
+ machine_data->dai_format = SND_SOC_DAIFMT_I2S;
+ machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
+ machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
+
+ /* In i2s-slave mode, the codec has its own clock source, so we
+ * need to get the frequency from the device tree and pass it to
+ * the codec driver.
+ */
+ iprop = of_get_property(codec_np, "clock-frequency", NULL);
+ if (!iprop || !*iprop) {
+ dev_err(&pdev->dev, "codec bus-frequency "
+ "property is missing or invalid\n");
+ ret = -EINVAL;
+ goto error;
+ }
+ machine_data->clk_frequency = *iprop;
+ } else if (strcasecmp(sprop, "i2s-master") == 0) {
+ machine_data->dai_format = SND_SOC_DAIFMT_I2S;
+ machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
+ machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
+ } else if (strcasecmp(sprop, "lj-slave") == 0) {
+ machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J;
+ machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
+ machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
+ } else if (strcasecmp(sprop, "lj-master") == 0) {
+ machine_data->dai_format = SND_SOC_DAIFMT_LEFT_J;
+ machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
+ machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
+ } else if (strcasecmp(sprop, "rj-slave") == 0) {
+ machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J;
+ machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
+ machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
+ } else if (strcasecmp(sprop, "rj-master") == 0) {
+ machine_data->dai_format = SND_SOC_DAIFMT_RIGHT_J;
+ machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
+ machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
+ } else if (strcasecmp(sprop, "ac97-slave") == 0) {
+ machine_data->dai_format = SND_SOC_DAIFMT_AC97;
+ machine_data->codec_clk_direction = SND_SOC_CLOCK_OUT;
+ machine_data->cpu_clk_direction = SND_SOC_CLOCK_IN;
+ } else if (strcasecmp(sprop, "ac97-master") == 0) {
+ machine_data->dai_format = SND_SOC_DAIFMT_AC97;
+ machine_data->codec_clk_direction = SND_SOC_CLOCK_IN;
+ machine_data->cpu_clk_direction = SND_SOC_CLOCK_OUT;
+ } else {
+ dev_err(&pdev->dev,
+ "unrecognized fsl,mode property '%s'\n", sprop);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ if (!machine_data->clk_frequency) {
+ dev_err(&pdev->dev, "unknown clock frequency\n");
+ ret = -EINVAL;
+ goto error;
+ }
+
+ /* Read the SSI information from the device tree */
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret || !res.start) {
+ dev_err(&pdev->dev, "could not obtain SSI address\n");
+ goto error;
+ }
+ ssi_stx_phys = res.start + offsetof(struct ccsr_ssi, stx0);
+ ssi_srx_phys = res.start + offsetof(struct ccsr_ssi, srx0);
+
+ /* Find the playback DMA channel to use. */
+ ret = get_dma_channel(np, "fsl,playback-dma", ssi_stx_phys,
+ ssi_srx_phys, &machine_data->dai[0],
+ &machine_data->dma_channel_id[0],
+ &machine_data->dma_id[0]);
+ if (ret) {
+ dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n");
+ goto error;
+ }
+
+ /* Find the capture DMA channel to use. */
+ ret = get_dma_channel(np, "fsl,capture-dma", ssi_stx_phys,
+ ssi_srx_phys, &machine_data->dai[1],
+ &machine_data->dma_channel_id[1],
+ &machine_data->dma_id[1]);
+ if (ret) {
+ dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n");
+ goto error;
+ }
+
+ /* Initialize our DAI data structure. */
+ iprop = of_get_property(codec_np, "reg", NULL);
+ if (!iprop) {
+ dev_err(&pdev->dev, "codec node is missing 'reg' property\n");
+ goto error;
+ }
+ machine_data->dai[0].codec_id = *iprop;
+ machine_data->dai[1].codec_id = *iprop;
+
+ machine_data->dai[0].stream_name = "playback";
+ machine_data->dai[1].stream_name = "capture";
+
+ machine_data->card.probe = mpc8610_hpcd_machine_probe;
+ machine_data->card.remove = mpc8610_hpcd_machine_remove;
+ machine_data->card.name = "MPC8610 HPCD";
+ machine_data->card.num_links = 2;
+ machine_data->card.dai_link = machine_data->dai;
+
+ /* Allocate a new audio platform device structure */
+ sound_device = platform_device_alloc("soc-audio", -1);
+ if (!sound_device) {
+ dev_err(&pdev->dev, "platform device alloc failed\n");
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ /* Associate the card data with the sound device */
+ platform_set_drvdata(sound_device, &machine_data->card);
+
+ /* Register with ASoC */
+ ret = platform_device_add(sound_device);
+ if (ret) {
+ dev_err(&pdev->dev, "platform device add failed\n");
+ goto error;
+ }
+
+ of_node_put(codec_np);
+
+ return 0;
+
+error:
+ of_node_put(codec_np);
+ of_node_put(dma_np);
+ of_node_put(dma_channel_np);
+
+ if (sound_device)
+ platform_device_unregister(sound_device);
+
+ kfree(machine_data);
+
+ return ret;
+}
+
+/**
+ * mpc8610_hpcd_remove: remove the platform device
+ *
+ * This function is called when the platform device is removed.
+ */
+static int __devexit mpc8610_hpcd_remove(struct platform_device *pdev)
+{
+ struct platform_device *sound_device = dev_get_drvdata(&pdev->dev);
+ struct snd_soc_card *card = platform_get_drvdata(sound_device);
+ struct mpc8610_hpcd_data *machine_data =
+ container_of(card, struct mpc8610_hpcd_data, card);
+
+ platform_device_unregister(sound_device);
+
+ kfree(machine_data);
+ sound_device->dev.platform_data = NULL;
+
+ dev_set_drvdata(&pdev->dev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver mpc8610_hpcd_driver = {
+ .probe = mpc8610_hpcd_probe,
+ .remove = __devexit_p(mpc8610_hpcd_remove),
+ .driver = {
+ /* The name must match the 'model' property in the device tree,
+ * in lowercase letters.
+ */
+ .name = "snd-soc-mpc8610hpcd",
+ .owner = THIS_MODULE,
+ },
+};
+
+/**
+ * mpc8610_hpcd_init: machine driver initialization.
+ *
+ * This function is called when this module is loaded.
+ */
+static int __init mpc8610_hpcd_init(void)
+{
+ struct device_node *guts_np;
+ struct resource res;
+
+ pr_info("Freescale MPC8610 HPCD ALSA SoC machine driver\n");
+
+ /* Get the physical address of the global utilities registers */
+ guts_np = of_find_compatible_node(NULL, NULL, "fsl,mpc8610-guts");
+ if (of_address_to_resource(guts_np, 0, &res)) {
+ pr_err("mpc8610-hpcd: missing/invalid global utilities node\n");
+ return -EINVAL;
+ }
+ guts_phys = res.start;
+
+ return platform_driver_register(&mpc8610_hpcd_driver);
+}
+
+/**
+ * mpc8610_hpcd_exit: machine driver exit
+ *
+ * This function is called when this driver is unloaded.
+ */
+static void __exit mpc8610_hpcd_exit(void)
+{
+ platform_driver_unregister(&mpc8610_hpcd_driver);
+}
+
+module_init(mpc8610_hpcd_init);
+module_exit(mpc8610_hpcd_exit);
+
+MODULE_AUTHOR("Timur Tabi <timur at freescale.com>");
+MODULE_DESCRIPTION("Freescale MPC8610 HPCD ALSA SoC machine driver");
+MODULE_LICENSE("GPL v2");
--
1.6.5
More information about the Alsa-devel
mailing list