[alsa-devel] [PATCH v2 2/5] ASoC: DaVinci: Voice Codec Interface
Liam Girdwood
lrg at slimlogic.co.uk
Fri Mar 12 09:00:57 CET 2010
On Thu, 2010-03-11 at 09:32 -0600, miguel.aguilar at ridgerun.com wrote:
> From: Miguel Aguilar <miguel.aguilar at ridgerun.com>
>
> This patch adds the support for the interface needed by the DaVinci
> Voice Codec CQ93VC.
>
> Signed-off-by: Miguel Aguilar <miguel.aguilar at ridgerun.com>
> ---
snip
> +
> +static int davinci_vcif_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params,
> + struct snd_soc_dai *dai)
> +{
> + struct davinci_vcif_dev *davinci_vcif_dev = dai->private_data;
> + struct davinci_vc *davinci_vc = davinci_vcif_dev->davinci_vc;
> + struct davinci_pcm_dma_params *dma_params =
> + &davinci_vcif_dev->dma_params[substream->stream];
> + u32 w;
> +
> + /* Restart the codec before setup */
> + davinci_vcif_stop(substream);
> + davinci_vcif_start(substream);
> +
> + /* General line settings */
> + writel(DAVINCI_VC_CTRL_MASK, davinci_vc->base + DAVINCI_VC_CTRL);
> +
> + writel(DAVINCI_VC_INT_MASK, davinci_vc->base + DAVINCI_VC_INTCLR);
> +
> + writel(DAVINCI_VC_INT_MASK, davinci_vc->base + DAVINCI_VC_INTEN);
> +
> + w = readl(davinci_vc->base + DAVINCI_VC_CTRL);
> +
> + /* Determine xfer data type */
> + switch (params_format(params)) {
> + case SNDRV_PCM_FORMAT_U8:
> + dma_params->data_type = 0;
> +
> + MOD_REG_BIT(w, DAVINCI_VC_CTRL_RD_BITS_8 |
> + DAVINCI_VC_CTRL_RD_UNSIGNED |
> + DAVINCI_VC_CTRL_WD_BITS_8 |
> + DAVINCI_VC_CTRL_WD_UNSIGNED, 1);
> + break;
> + case SNDRV_PCM_FORMAT_S8:
> + dma_params->data_type = 1;
> +
> + MOD_REG_BIT(w, DAVINCI_VC_CTRL_RD_BITS_8 |
> + DAVINCI_VC_CTRL_WD_BITS_8, 1);
> +
> + MOD_REG_BIT(w, DAVINCI_VC_CTRL_RD_UNSIGNED |
> + DAVINCI_VC_CTRL_WD_UNSIGNED, 0);
> + break;
> + case SNDRV_PCM_FORMAT_S16_LE:
> + dma_params->data_type = 2;
> +
> + MOD_REG_BIT(w, DAVINCI_VC_CTRL_RD_BITS_8 |
> + DAVINCI_VC_CTRL_RD_UNSIGNED |
> + DAVINCI_VC_CTRL_WD_BITS_8 |
> + DAVINCI_VC_CTRL_WD_UNSIGNED, 0);
> + break;
> + default:
> + printk(KERN_WARNING "davinci-vcif: unsupported PCM format");
> + return -EINVAL;
> + }
> +
> + dma_params->acnt = dma_params->data_type;
> +
> + writel(w, davinci_vc->base + DAVINCI_VC_CTRL);
> +
> + return 0;
> +}
> +
> +static int davinci_vcif_trigger(struct snd_pcm_substream *substream, int cmd,
> + struct snd_soc_dai *dai)
> +{
> + int ret = 0;
> +
> + switch (cmd) {
> + case SNDRV_PCM_TRIGGER_START:
> + case SNDRV_PCM_TRIGGER_RESUME:
> + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
> + davinci_vcif_start(substream);
> + case SNDRV_PCM_TRIGGER_STOP:
> + case SNDRV_PCM_TRIGGER_SUSPEND:
> + case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> + davinci_vcif_stop(substream);
> + break;
> + default:
> + ret = -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +#define DAVINCI_VCIF_RATES SNDRV_PCM_RATE_8000_48000
> +
> +static struct snd_soc_dai_ops davinci_vcif_dai_ops = {
> + .trigger = davinci_vcif_trigger,
> + .hw_params = davinci_vcif_hw_params,
> +};
> +
> +struct snd_soc_dai davinci_vcif_dai = {
> + .name = "davinci-vcif",
> + .playback = {
> + .channels_min = 1,
> + .channels_max = 2,
> + .rates = DAVINCI_VCIF_RATES,
> + .formats = SNDRV_PCM_FMTBIT_S16_LE,},
> + .capture = {
> + .channels_min = 1,
> + .channels_max = 2,
> + .rates = DAVINCI_VCIF_RATES,
> + .formats = SNDRV_PCM_FMTBIT_S16_LE,},
Your hw_params() supports more formats than just this one.
Liam
--
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
http://www.slimlogic.co.uk
More information about the Alsa-devel
mailing list