[alsa-devel] [PATCH 2/4] ALSA: usb-audio: fix control messages for USB_RECIP_INTERFACE
Daniel Mack
daniel at caiaq.de
Fri Jun 11 15:33:09 CEST 2010
Control messages directed to an interface must have the interface number
set in the lower 8 bits of wIndex. This wasn't done correctly for some
clock and mixer messages.
Signed-off-by: Daniel Mack <daniel at caiaq.de>
Reported-by: Alex Lee <alexlee188 at gmail.com>
---
sound/usb/clock.c | 12 ++++++++----
sound/usb/format.c | 6 ++++--
sound/usb/helper.h | 4 ++++
3 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index b7aadd6..b585511 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -103,7 +103,8 @@ static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_i
ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0),
UAC2_CS_CUR,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
- UAC2_CX_CLOCK_SELECTOR << 8, selector_id << 8,
+ UAC2_CX_CLOCK_SELECTOR << 8,
+ snd_usb_ctrl_intf(chip) | (selector_id << 8),
&buf, sizeof(buf), 1000);
if (ret < 0)
@@ -120,7 +121,8 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_CLOCK_VALID << 8, source_id << 8,
+ UAC2_CS_CONTROL_CLOCK_VALID << 8,
+ snd_usb_ctrl_intf(chip) | (source_id << 8),
&data, sizeof(data), 1000);
if (err < 0) {
@@ -269,7 +271,8 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
data[3] = rate >> 24;
if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC2_CS_CUR,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
- UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
data, sizeof(data), 1000)) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
dev->devnum, iface, fmt->altsetting, rate);
@@ -278,7 +281,8 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
data, sizeof(data), 1000)) < 0) {
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
dev->devnum, iface, fmt->altsetting);
diff --git a/sound/usb/format.c b/sound/usb/format.c
index df5b29f..8eccf17 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -227,7 +227,8 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
/* get the number of sample rates first by only fetching 2 bytes */
ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
tmp, sizeof(tmp), 1000);
if (ret < 0) {
@@ -247,7 +248,8 @@ static int parse_audio_format_rates_v2(struct snd_usb_audio *chip,
/* now get the full information */
ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8, clock << 8,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
data, data_size, 1000);
if (ret < 0) {
diff --git a/sound/usb/helper.h b/sound/usb/helper.h
index a6b0e51..09bd943 100644
--- a/sound/usb/helper.h
+++ b/sound/usb/helper.h
@@ -28,5 +28,9 @@ unsigned char snd_usb_parse_datainterval(struct snd_usb_audio *chip,
#define snd_usb_get_speed(dev) ((dev)->speed)
#endif
+static inline int snd_usb_ctrl_intf(struct snd_usb_audio *chip)
+{
+ return get_iface_desc(chip->ctrl_intf)->bInterfaceNumber;
+}
#endif /* __USBAUDIO_HELPER_H */
--
1.7.1
More information about the Alsa-devel
mailing list