[alsa-devel] [Fwd: Re: [pulseaudio-discuss] pulseaudio debug mode]
Colin Guthrie
gmane at colin.guthr.ie
Mon Jul 26 11:29:02 CEST 2010
'Twas brillig, and Raymond Yau at 26/07/10 05:21 did gyre and gimble:
> 2010/7/26 Raymond Yau <superquad.vortex2 at gmail.com>
>
>>
>>
>> 2010/7/26 Chris <cpollock at embarqmail.com>
>>
>>> On Mon, 2010-07-26 at 09:45 +0800, Raymond Yau wrote:
>>>> 2010/7/26 Chris <cpollock at embarqmail.com>
>>>>
>>>>> On Mon, 2010-07-26 at 07:31 +0800, Raymond Yau wrote:
>>>>>> 2010/7/26 Chris <cpollock at embarqmail.com>
>>>>>>
>>>>>>> Raymond, attached is a post I made today to the pulseaudio list.
>>>>>>>
>>>>>>> From: Chris <cpollock at embarqmail.com>
>>>>>>> To: pulseaudio-discuss at mail.0pointer.de
>>>>>>> Date: Sun, 25 Jul 2010 12:15:02 -0500
>>>>>>> Subject: Re: [pulseaudio-discuss] pulseaudio debug mode
>>>>>>> On Fri, 2010-07-23 at 08:58 +0100, Colin Guthrie wrote:
>>>>>>>> 'Twas brillig, and Chris at 23/07/10 02:04 did gyre and gimble:
>>>>>>>>> What is the best way to start PA for debugging and still have
>>> all
>>>>> the
>>>>>>>>> usual clients running?
>>>>>>>>
>>>>>>>> If you mean having all the clients connect (e.g. applications
>>> with
>>>>>>>> libcanberra support or similar for sound events), then there are
>>>>>>>> basically two ways.
>>>>>>>>
>>>>>>>> The first is as Luke suggests. These clients will automatically
>>>>>>>> reconnect to PA if they need to (provided you have a vaguely
>>> recent
>>>>>>>> libcanberra), after it is restarted and run in debug mode.
>>>>>>>>
>>>>>>>> Alternatively you can simply set debug-level to "debug" in
>>>>> daemon.conf
>>>>>>>> (in /etc/pulse or ~/.pulse), and then "grep pulseaudio
>>>>> /var/log/messages"
>>>>>>>>
>>>>>>>> Col
>>>>>>>>
>>>>>>>
>>>>>>> Colin, link below is for debug output also some other output.
>>> Anything
>>>>>>> look out of place that would cause the overruns?
>>>>>>>
>>>>>>> http://pastebin.com/ZWSWmXZt
>>>>>>> --
>>>>>>>
>>>>>>
>>>>>> Most likely you will need to set debug-level to "debug" in
>>> daemon.conf
>>>>>> logout and login , and check the /var/log/messages
>>>>>>
>>>>>> I suspect it occur after PA server abort and auto spawn , so please
>>> don't
>>>>>> just post the PA log starting from "asyncq overrun" , you need to
>>> post
>>>>> from
>>>>>> the last two PA startup sequence before the error occur since we
>>> need to
>>>>>> know why PA auto spawn
>>>>>
>>>>> Is this what you mean Raymond:
>>>>> http://pastebin.com/4RT7YaG6
>>>>>
>>>>>
>>>> No, you don't have "asyncq overrun" error in these log
>>>>
>>>> if you had change the "debug-level", the log still keep in
>>> /var/log/messages
>>>>
>>>> The PA client which can connected to PA server before the PA server
>>> start
>>>> the playing thread is the PA client which autospawn the PA server
>>>
>>> The log level has been set to debug all day
>>>
>>> ### Read from configuration file: /home/chris/.pulse//daemon.conf ###
>>> daemonize = no
>>> fail = yes
>>> high-priority = yes
>>> nice-level = -11
>>> realtime-scheduling = yes
>>> realtime-priority = 5
>>> allow-module-loading = yes
>>> allow-exit = yes
>>> use-pid-file = yes
>>> system-instance = no
>>> cpu-limit = no
>>> enable-shm = yes
>>> flat-volumes = yes
>>> lock-memory = no
>>> exit-idle-time = 20
>>> scache-idle-time = 20
>>> dl-search-path = /usr/lib/pulse-0.9.21/modules
>>> default-script-file = /etc/pulse/default.pa
>>> load-default-script-file = yes
>>> log-target = auto
>>> log-level = debug
>>> resample-method = speex-float-0
>>> enable-remixing = yes
>>> enable-lfe-remixing = no
>>> default-sample-format = s16le
>>> default-sample-rate = 44100
>>> default-sample-channels = 2
>>> default-channel-map = front-left,front-right
>>> default-fragments = 4
>>> default-fragment-size-msec = 25
>>> shm-size-bytes = 0
>>> log-meta = no
>>> log-time = yes
>>> log-backtrace = 0
>>> rlimit-fsize = -1
>>> rlimit-data = -1
>>> rlimit-stack = -1
>>> rlimit-core = -1
>>> rlimit-rss = -1
>>> rlimit-as = -1
>>> rlimit-nproc = -1
>>> rlimit-nofile = 256
>>> rlimit-memlock = -1
>>> rlimit-locks = -1
>>> rlimit-sigpending = -1
>>> rlimit-msgqueue = -1
>>> rlimit-nice = 31
>>> rlimit-rtprio = 9
>>> rlimit-rttime = 1000000
>>>
>>>
>>> The is what happens after a fresh log-in and Mandrive update is running
>>> and I also start Firefox:
>>>
>>> Jul 25 21:48:22 localhost mdkapplet[16332]: Computing new updates...
>>> Jul 25 21:48:23 localhost mdkapplet[16332]: running: urpmi.update
>>> --update
>>> Jul 25 21:48:39 localhost mdkapplet[16332]: updating inactive backport
>>> media Main Backports (Official2010.1-4), Contrib Backports
>>> (Official2010.1-12), Non-free Backports (Official2010.1-20), PLF Free
>>> backports, PLF Non-free backports
>>> Jul 25 21:48:39 localhost mdkapplet[16332]: running: urpmi.update Main
>>> Backports (Official2010.1-4)
>>> Jul 25 21:48:46 localhost mdkapplet[16332]: running: urpmi.update
>>> Contrib Backports (Official2010.1-12)
>>> Jul 25 21:48:48 localhost mdkapplet[16332]: running: urpmi.update
>>> Non-free Backports (Official2010.1-20)
>>> Jul 25 21:48:51 localhost mdkapplet[16332]: running: urpmi.update PLF
>>> Free backports
>>> Jul 25 21:48:55 localhost mdkapplet[16332]: running: urpmi.update PLF
>>> Non-free backports
>>> Jul 25 21:48:57 localhost pulseaudio[26721]: (7440.932| 71.318)
>>> client.c: Created 44 "Native client (UNIX socket client)"
>>> Jul 25 21:48:57 localhost pulseaudio[26721]: (7440.932| 0.000)
>>> protocol-native.c: Protocol version: remote 16, local 16
>>> Jul 25 21:48:57 localhost pulseaudio[26721]: (7440.932| 0.000)
>>> protocol-native.c: Got credentials: uid=500 gid=500 success=1
>>> Jul 25 21:48:57 localhost pulseaudio[26721]: (7440.932| 0.000)
>>> protocol-native.c: SHM possible: yes
>>> Jul 25 21:48:57 localhost pulseaudio[26721]: (7440.932| 0.000)
>>> protocol-native.c: Negotiated SHM: yes
>>> Jul 25 21:48:57 localhost pulseaudio[26721]: (7440.934| 0.001)
>>> module-augment-properties.c: Looking for .desktop file for firefox
>>> Jul 25 21:49:19 localhost pulseaudio[26721]: (7462.497| 21.563)
>>> asyncq.c: q overrun, queuing locally
>>> Jul 25 21:49:19 localhost pulseaudio[26721]: (7462.577| 0.080)
>>> asyncq.c: q overrun, queuing locally
>>> Jul 25 21:49:19 localhost pulseaudio[26721]: (7462.577| 0.000)
>>> asyncq.c: q overrun, queuing locally
>>> Jul 25 21:49:19 localhost pulseaudio[26721]: (7462.657| 0.079)
>>> asyncq.c: q overrun, queuing locally
>>> Jul 25 21:49:19 localhost pulseaudio[26721]: (7462.737| 0.080)
>>> asyncq.c: q overrun, queuing locally
>>> Jul 25 21:49:19 localhost pulseaudio[26721]: (7462.737| 0.000)
>>> asyncq.c: q overrun, queuing locally
>>> Jul 25 21:49:19 localhost pulseaudio[26721]: (7462.737| 0.000)
>>> asyncq.c: q overrun, queuing locally
>>> Jul 25 21:49:19 localhost pulseaudio[26721]: (7462.737| 0.000)
>>> asyncq.c: q overrun, queuing locally
>>> Jul 25 21:49:19 localhost pulseaudio[26721]: (7462.817| 0.079)
>>> asyncq.c: q overrun, queuing locally
>>> Jul 25 21:49:19 localhost pulseaudio[26721]: (7462.817| 0.000)
>>> asyncq.c: q overrun, queuing locally
>>> Jul 25 21:49:19 localhost pulseaudio[26721]: (7462.897| 0.079)
>>> asyncq.c: q overrun, queuing locally
>>> Jul 25 21:49:51 localhost mdkapplet[16332]: Packages are up to date
>>>
>>>
>> you should ask PA developer to add code to debug since this is a queue used
>> by PA and has no relationship with alsa ,
>>
>> alsa-sink and alsa-source can only post PA_CORE_MESSAGE_UNLOAD_MODULE
>>
>> modules/alsa/alsa-sink.c: pa_asyncmsgq_post(u->thread_mq.outq,
>> PA_MSGOBJECT(u->core), PA_CORE_MESSAGE_UNLOAD_MODULE, u->module, 0, NULL,
>> NULL);
>> modules/alsa/alsa-source.c: pa_asyncmsgq_post(u->thread_mq.outq,
>> PA_MSGOBJECT(u->core), PA_CORE_MESSAGE_UNLOAD_MODULE, u->module, 0, NULL,
>> NULL);
>>
>>
>> and you have to copy definition of struct asyncmsgq_item from asyncmsgq.c
>>
>>
>> void pa_asyncq_post(pa_asyncq*l, void *p) {
>> struct localq *q;
>> + struct asyncmsgq_item *i;
>>
>> pa_assert(l);
>> pa_assert(p);
>>
>> + i=( struct asyncmsgq_item *)p;
>>
>> if (flush_postq(l, FALSE))
>> if (pa_asyncq_push(l, p, FALSE) >= 0)
>> return;
>>
>> /* OK, we couldn't push anything in the queue. So let's queue it
>> * locally and push it later */
>>
>> if (pa_log_ratelimit())
>> - pa_log_warn("q overrun, queuing locally");
>> + pa_log_warn("q overrun, queuing locally code %d",i->code);
>>
>
>
> you have to find out why this fail to return
>
> flush_postq() return false or pa_asyncq_push() return negative number
>
> if (flush_postq(l, FALSE))
> if (pa_asyncq_push(l, p, FALSE) >= 0)
> return;
I can add this kind of debug to a package for you Chris if you like. I'm
not 100% sure what info it will find out though....
What arch are you using i586 or x86_64?
Col
--
Colin Guthrie
gmane(at)colin.guthr.ie
http://colin.guthr.ie/
Day Job:
Tribalogic Limited [http://www.tribalogic.net/]
Open Source:
Mandriva Linux Contributor [http://www.mandriva.com/]
PulseAudio Hacker [http://www.pulseaudio.org/]
Trac Hacker [http://trac.edgewall.org/]
More information about the Alsa-devel
mailing list