[alsa-devel] [PATCH - alsa-lib 0/3] Fixes for snd_tlv_convert_from_dB

[Peter Ujfalusi]

Hello,

One cosmetic fix, and two real fixes for alsa-lib's tlv handling.

There were two separate issue with the snd_tlv_convert_from_dB function:
1. When user asked for out of range dB value, and the control had
   SND_CTL_TLVT_DB_RANGE, the control's full range was not checked against the
   requested value, which resulted failure.
2. When there are 'holes' in the SND_CTL_TLVT_DB_RANGE array,
   snd_tlv_convert_from_dB will fail to find the apropriate raw value.

For issue #2, I have sent patches for the drivers I maintain, but Mark Brown
suggested to fix the issue in alsa-lib instead of converting the driver's
non-overlapping to overlapping mapping:
http://mailman.alsa-project.org/pipermail/alsa-devel/2010-July/029483.html

So the following series for alsa-lib, will fix the SND_CTL_TLVT_DB_RANGE
handling.

---
Peter Ujfalusi (3):
  tlv: Check out of range dB with SND_CTL_TLVT_DB_RANGE
  tlv: Handle 'holes' in SND_CTL_TLVT_DB_RANGE array
  tlv: Remove tailing tab after snd_ctl_get_dB_range function

 src/control/tlv.c |   17 +++++++++++++++--
 1 files changed, 15 insertions(+), 2 deletions(-)