[alsa-devel] [PATCH v4 0/3] McPDM driver patch series

[Liam Girdwood]

On Mon, 2010-02-22 at 15:09 -0600, Candelaria Villareal, Jorge wrote:
> McPDM module is the interface between the OMAP and TWL6030 audio codec.
> 
> The interface supports the following:
> * Up to 5 downlink channels and 3 uplink channels
> * 88.2 and 96 KHz
> * 32 bit sample size
> 
> Currently, driver is set to support up to 4 downlink channels. If 2
> channels are selected, output will go to the headset, and if 4 channels
> are selected, output will go to the headset and speakers. Functionality
> to select the output at runtime will be added afterwards.
> 
> Command and status mode is not supported in current patches.
> 
> Changes from v3:
> - Implemented changes based on comments from Liam Girdwood.
> 
> --
> 
> Jorge Eduardo Candelaria (1):
>       ASoC: OMAP4: Add support for McPDM
> 
> Misael Lopez Cruz (2):
>       ASoC: OMAP: data_type and sync_mode configurable in audio dma
>       ASoC: OMAP4: Add McPDM platform driver
> 
>  sound/soc/omap/Kconfig      |    3 +
>  sound/soc/omap/Makefile     |    2 +
>  sound/soc/omap/mcpdm.c      |  486 +++++++++++++++++++++++++++++++++++++++++++
>  sound/soc/omap/mcpdm.h      |  151 +++++++++++++
>  sound/soc/omap/omap-mcbsp.c |    2 +
>  sound/soc/omap/omap-mcpdm.c |  251 ++++++++++++++++++++++
>  sound/soc/omap/omap-mcpdm.h |   29 +++
>  sound/soc/omap/omap-pcm.c   |   15 +-
>  sound/soc/omap/omap-pcm.h   |    4 +-
>  9 files changed, 935 insertions(+), 8 deletions(-)
>  create mode 100644 sound/soc/omap/mcpdm.c
>  create mode 100644 sound/soc/omap/mcpdm.h
>  create mode 100644 sound/soc/omap/omap-mcpdm.c
>  create mode 100644 sound/soc/omap/omap-mcpdm.h
> _______________________________________________

All Acked-by: Liam Girdwood <lrg at slimlogic.co.uk>

-- 
Freelance Developer, SlimLogic Ltd
ASoC and Voltage Regulator Maintainer.
http://www.slimlogic.co.uk