[alsa-devel] Exposure of the input devices of Conexant CX20561 amplifier
Takashi Iwai
tiwai at suse.de
Thu Sep 24 10:09:01 CEST 2009
At Sun, 20 Sep 2009 20:50:38 +0200,
Matthias Bläsing wrote:
>
> Hello,
>
> it would be nice if I could control the input channels of my lenovo
> laptop (Lenovo R500). These are configured for microphone input, but the
> amplifier can be deactivated, so that it can work with the higher
> line-in level.
>
> The resulting quality is not good, but at least usable.
>
> The volume control is joint, but the amplifier control are seperated.
> With the HDAAnalyser I could find the Nodes (0x17 (rear) and 0x18
> (front)) can be used to control the amplification. The setting can be
> changed between 0 and 4, where 0 makes it possible to use the input for
> line-in, while 4 is better suited for microphone input.
>
> I'm not sure whether it would be better to expose this as a stepped
> control or just a switch (amplifier on/off).
>
> These are the loaded modules (from kernel 2.6.31):
>
> snd_usb_audio 74152 3
> snd_usb_lib 13904 1 snd_usb_audio
> snd_hda_codec_conexant 17684 1
> snd_seq_dummy 2748 0
> snd_seq_oss 24620 0
> snd_hda_intel 24064 9
> snd_hda_codec 65724 2 snd_hda_codec_conexant,snd_hda_intel
> snd_seq_midi 6232 0
> snd_hwdep 6772 3 snd_usb_audio,snd_hda_codec
> snd_rawmidi 19600 2 snd_usb_lib,snd_seq_midi
> snd_seq_midi_event 6580 2 snd_seq_oss,snd_seq_midi
> snd_pcm_oss 33516 0
> snd_mixer_oss 13416 1 snd_pcm_oss
> snd_seq 44744 7
> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
> snd_pcm 64872 6
> snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm_oss
> snd_timer 18448 2 snd_seq,snd_pcm
> snd_seq_device 6424 5
> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
> snd_page_alloc 8556 2 snd_hda_intel,snd_pcm
> snd 52452 35
> snd_usb_audio,snd_hda_codec_conexant,snd_seq_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_pcm,snd_timer,snd_seq_device
> soundcore 6876 1 snd
>
> I attached the /proc/asound/card0/codec#0 info to this email. If you
> need further information - please ask.
Could you give alsa-info.sh output (run with --no-upload option)?
This would be more comprehensive information.
thanks,
Takashi
More information about the Alsa-devel
mailing list