[alsa-devel] [PATCH 5/8] board-rx51-peripherals: split vaux3 and vmmc2 supplies

[Mark Brown]

On Thu, Oct 08, 2009 at 02:58:54PM +0300, Eduardo Valentin wrote:
> From: Eduardo Valentin <eduardo.valentin at nokia.com>

> Use separated supplies for vaux3 and vmmc2.

> Signed-off-by: Eduardo Valentin <eduardo.valentin at nokia.com>

> +static struct regulator_consumer_supply rx51_vaux3_supply = {
> +	.supply			= "vmmc",
> +};
> +

I'd expect all these supplies to have devices associated with them (see
below)...

>  static struct regulator_consumer_supply rx51_vmmc2_supply = {
>  	.supply			= "vmmc",
>  };
> @@ -184,7 +188,7 @@ static struct regulator_init_data rx51_vaux3_mmc = {
>  					| REGULATOR_CHANGE_STATUS,
>  	},
>  	.num_consumer_supplies	= 1,
> -	.consumer_supplies	= &rx51_vmmc2_supply,
> +	.consumer_supplies	= &rx51_vaux3_supply,
>  };

I may have missed it but I don't see rx51_vmmc2_supply added back
anywhere in the patch?

>  static struct regulator_init_data rx51_vaux4 = {
> @@ -266,7 +270,7 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
>  	/* set up MMC adapters, linking their regulators to them */
>  	twl4030_mmc_init(mmc);
>  	rx51_vmmc1_supply.dev = mmc[0].dev;
> -	rx51_vmmc2_supply.dev = mmc[1].dev;
> +	rx51_vaux3_supply.dev = mmc[1].dev;

...using dev_name rather than dev should avoid the need to do this at
runtime.
--
To unsubscribe from this list: send the line "unsubscribe alsa-devel" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html