[alsa-devel] [PATCH 29/31] HDA patch_via.c: Change PW4 connect select default to to MW0.

[Li Bo]

[ALSA] HDA VIA: Change PW4 connect select default to to MW0.

According to customer request, hp should be default to redirected mode,
i.e. PW4 connect select default to to MW0.

, i.e. PW4 should be default to MW0.

Signed-off-by: Lydia Wang <lydiawang at viatech.com.cn>

Index: sound-2.6/sound/pci/hda/patch_via.c
===================================================================
--- sound-2.6.orig/sound/pci/hda/patch_via.c	2009-10-05 15:14:10.000000000 +0800
+++ sound-2.6/sound/pci/hda/patch_via.c	2009-10-05 15:14:16.000000000 +0800
@@ -1505,8 +1505,8 @@
 	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
 	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
 	
-	/* Setup default input to PW4 */
-	{0x20, AC_VERB_SET_CONNECT_SEL, 0x1},
+	/* Setup default input MW0 to PW4 */
+	{0x20, AC_VERB_SET_CONNECT_SEL, 0},
 	/* PW9 Output enable */
 	{0x25, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
 	/* power down jack detect function */
@@ -2641,8 +2641,8 @@
 	{0x1f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
 	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},

-	/* Set input of PW4 as AOW4 */
-	{0x20, AC_VERB_SET_CONNECT_SEL, 0x1},
+	/* Set input of PW4 as MW0 */
+	{0x20, AC_VERB_SET_CONNECT_SEL, 0},
 	/* PW9 Output enable */
 	{0x24, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
 	{ }
@@ -3196,7 +3196,7 @@
 	{0x27, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},

 	/* Setup default input to PW4 */
-	{0x1d, AC_VERB_SET_CONNECT_SEL, 0x1},
+	{0x1d, AC_VERB_SET_CONNECT_SEL, 0},
 	/* PW9 Output enable */
 	{0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
 	/* PW10 Input enable */