[alsa-devel] snd-hdsp driver error?
Lars Zobbe
fedesensfar at gmail.com
Sun Nov 8 19:30:36 CET 2009
Thanks a lot Takashi and Raymond.
I guess that means the fix from tom-ipp, that Raymond referred to, won't
work. So what can I do to help you fix this. Do you want me to try and run
something? I would be pleased to help out.
When you say "the problem is somewhere else". Do you have an idea about
where that could be?
Greetings
Lars.
On Sun, Nov 8, 2009 at 11:34 AM, Takashi Iwai <tiwai at suse.de> wrote:
> At Sat, 7 Nov 2009 07:12:21 +0800,
> Raymond Yau wrote:
> >
> > AFAIK , alsa-lib use the driver name to find the name of corresponding
> > conf file from /usr/share/alsa/cards/aliases.conf
> > In your case , H-DSP.conf does not exist and there is no aliases in
> > /usr/share/alsa/cards/aliases.conf
> >
> > You have to ask Takashi or Jaroslav to fix this issue for your card
> >
> > open("/usr/share/alsa/cards/aliases.conf", O_RDONLY) = 3
> >
> >
> > access("/usr/share/alsa/cards/H-DSP.conf", R_OK) = -1 ENOENT (No such
> > file or directory)
> > open("/dev/snd/controlC1", O_RDONLY) = 3
> > close(3) = 0
> >
> >
> > write(2, "ALSA lib confmisc.c:1286:(snd_fu"..., 42ALSA lib
> > confmisc.c:1286:(snd_func_refer) ) = 42
> > write(2, "Unable to find definition 'cards"..., 58Unable to find
> > definition 'cards.H-DSP.pcm.front.0:CARD=0') = 58
> > write(2, "\n", 1
>
> Finally I can catch up pending posts...
>
> For hdsp, there is no clear definition for "front" or any surround
> outputs due to the nature of the hardware. So, getting an error isn't
> a bug in this case.
>
> PA should fall back into "hw" if all such pre-defined PCMs are not
> available. So, this is no critical situation for PA.
> The problem is somewhere else.
>
>
> Takashi
>
> >
> > 2009/11/7 Lars Zobbe <fedesensfar at gmail.com>
> >
> > > It is a clean install.
> > > lars at lars-desktop:~$ lsb_release -a && uname -a
> > > No LSB modules are available.
> > > Distributor ID: Ubuntu
> > > Description: Ubuntu 9.10
> > > Release: 9.10
> > > Codename: karmic
> > > Linux lars-desktop 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:05:01
> UTC
> > > 2009 x86_64 GNU/Linux
> > >
> > > It didn't work with pulseaudio in any previos version (of ubuntu or any
> > > other distro I've tried) either.
> > > And the standard answer from people "out there" is "forget about pulse
> it
> > > doesn't work with the HDSP" f.x. this guy
> > > http://ubuntuforums.org/showpost.php?p=7578331&postcount=10
> > > And that's why I contacted pulseaudio developers first when I found out
> the
> > > it was because snd_hdsp didn't load with the preferred udev but only
> with
> > > module-detect (se my first post). They said that I should inform Alsa
> > > developers as there seems to be a problem with the alsa driver.
> > >
> > > I've attached the strace output.
> > >
> > > Thanks.
> > > Lars.
> > >
> > >
> > >
> > >
> > > On Fri, Nov 6, 2009 at 2:53 AM, Raymond Yau <
> superquad.vortex2 at gmail.com>wrote:
> > >
> > >> Is it a clean install of Ubuntu 9.10 or upgrade from previous Ubuntu ?
> > >>
> > >> you may need to find out why aplay -v -Dfront 32bit.wav fail ?
> > >>
> > >> strace aplay -v -Dfront 32bit.wav
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> !!Linux Distribution
> > >>
> > >> !!------------------
> > >>
> > >> Ubuntu 9.10 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 9.10"
> > >>
> > >> !!Sound Servers on this system
> > >> !!----------------------------
> > >>
> > >> Pulseaudio:
> > >> Installed - Yes (/usr/bin/pulseaudio)
> > >>
> > >>
> > >> Running - Yes
> > >>
> > >> ESound Daemon:
> > >> Installed - Yes (/usr/bin/esd)
> > >> Running - No
> > >>
> > >> Jack:
> > >> Installed - Yes (/usr/bin/jackd)
> > >> Running - No
> > >>
> > >>
> > >> !!ALSA configuration files
> > >>
> > >>
> > >> !!------------------------
> > >>
> > >> !!User specific config file (~/.asoundrc)
> > >>
> > >> pcm.!default {
> > >> type plug
> > >> slave { pcm "jack" }
> > >> }
> > >>
> > >> pcm.jack {
> > >> type jack
> > >> playback_ports {
> > >>
> > >> 0 alsa_pcm:playback_1
> > >>
> > >> 1 alsa_pcm:playback_2
> > >> }
> > >> capture_ports {
> > >> 0 alsa_pcm:capture_1
> > >> 1 alsa_pcm:capture_2
> > >> }
> > >> }
> > >>
> > >> ctl.mixer0 {
> > >> type hw
> > >> card 0
> > >> }
> > >>
> > >>
> > >> lars at lars-desktop:~$ aplay -v -Dfront:0 32bit.wav
> > >> ALSA lib confmisc.c:1286:(snd_func_refer) Unable to find definition
> > >> 'cards.H-DSP.pcm.front.0:CARD=0'
> > >> ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_refer
> > >> returned error: No such file or directory
> > >> ALSA lib conf.c:3985:(snd_config_expand) Evaluate error: No such file
> or
> > >> directory
> > >> ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM front:0
> > >> aplay: main:608: audio open error: No such file or directory
> > >>
> > >>
> > >> Did PA developer tell you not to load oss module ?
> > >>
> > >>
> > >>
> > >> D: alsa-util.c: Checking for subset analog-mono (hw:%f)
> > >> D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> > >> D: alsa-util.c: Managed to open hw:0
> > >> D: alsa-util.c: snd_pcm_hw_params_set_access() failed: Invalid
> argument
> > >> D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> > >> D: alsa-util.c: Managed to open hw:0
> > >> D: alsa-util.c: snd_pcm_hw_params_set_access() failed: Invalid
> argument
> > >> D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> > >> D: alsa-util.c: Managed to open plug:hw:0
> > >> D: alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Little
> Endian)
> > >> failed: Invalid argument
> > >> D: alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Big Endian)
> > >> failed: Invalid argument
> > >> D: alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Little
> Endian)
> > >> failed: Invalid argument
> > >> D: alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Big Endian)
> > >> failed: Invalid argument
> > >> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid
> argument
> > >> D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> > >> D: alsa-util.c: Managed to open plug:hw:0
> > >> D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid
> argument
> > >> I: alsa-util.c: Failed to set hardware parameters on plug:hw:0:
> Invalid
> > >> argument
> > >> D: alsa-util.c: Trying hw:0 as last resort...
> > >> D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> > >> D: alsa-util.c: Managed to open hw:0
> > >> D: alsa-util.c: snd_pcm_hw_params_set_access() failed: Invalid
> argument
> > >> D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> > >> D: alsa-util.c: Managed to open hw:0
> > >> D: alsa-util.c: snd_pcm_hw_params_set_access() failed: Invalid
> argument
> > >> D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
> > >> D: alsa-util.c: Managed to open plug:hw:0
> > >> D: alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Little
> Endian)
> > >> failed: Invalid argument
> > >> D: alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Big Endian)
> > >> failed: Invalid argument
> > >> D: alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Little
> Endian)
> > >> failed: Invalid argument
> > >> D: alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Big Endian)
> > >> failed: Invalid argument
> > >> D: alsa-util.c: Maximum hw buffer size is 371 ms
> > >> I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_HW_PARAMS failed
> > >> I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_HW_PARAMS failed
> > >> I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_HW_PARAMS failed
> > >> I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_HW_PARAMS failed
> > >> D: alsa-util.c: Set neither period nor buffer size.
> > >> I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_HW_PARAMS failed
> > >> I: alsa-util.c: snd_pcm_hw_params failed: Device or resource busy
> > >> D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
> > >> D: alsa-util.c: Managed to open plug:hw:0
> > >> D: alsa-util.c: Maximum hw buffer size is 371 ms
> > >> I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_HW_PARAMS failed
> > >> I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_HW_PARAMS failed
> > >> I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_HW_PARAMS failed
> > >> I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_HW_PARAMS failed
> > >> D: alsa-util.c: Set neither period nor buffer size.
> > >> I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_HW_PARAMS failed
> > >> I: alsa-util.c: snd_pcm_hw_params failed: Device or resource busy
> > >> I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Device
> or
> > >> resource busy
> > >> E: module.c: Failed to load module "module-alsa-source" (argument:
> > >> "device_id=0"): initialization failed.
> > >> W: module.c: module-oss is deprecated: Please use module-alsa-card
> instead
> > >> of module-oss!
> > >> D: oss-util.c: capabilities: MMAP REALTIME TRIGGER
> > >> I: module-oss.c: Device opened in O_RDONLY mode.
> > >> D: oss-util.c: Asking for 4 fragments of size 512 (requested 880)
> > >> E: oss-util.c: SNDCTL_DSP_SETFMT: Device or resource busy
> > >> E: module.c: Failed to load module "module-oss" (argument:
> > >> "device=/dev/dsp"): initialization failed.
> > >> W: module-detect.c: failed to detect any sound hardware.
> > >>
> > >>
> > >> 2009/11/6 Lars Zobbe <fedesensfar at gmail.com>
> > >>
> > >> Sorry. I didn't realise that it was a bash script. Here is the link to
> my
> > >>> alsa-info
> > >>>
> > >>>
> http://www.alsa-project.org/db/?f=d3728557be71067e2ed0920747118ae7efff2829
> > >>>
> > >>> Thanks again.
> > >>> Lars.
> > >>>
> > >>>
> > >>> On Thu, Nov 5, 2009 at 5:29 AM, Raymond Yau <
> superquad.vortex2 at gmail.com
> > >>> > wrote:
> > >>>
> > >>>> Please provide the full pulseaudio log and output of alsa-info.sh
> > >>>>
> > >>>> http://www.pulseaudio.org/wiki/Troubleshooting
> > >>>>
> > >>>> pulseaudio -k; pulseaudio -vvv
> > >>>>
> > >>>> and
> > >>>>
> > >>>> aplay -v -Dfront:0 32bit.wav
> > >>>>
> > >>>> aplay -v -M -Dfront:0 32bit.wav
> > >>>>
> > >>>> aplay -v -Dplughw:0 any.wav
> > >>>>
> > >>>> aplay -v -M -Dplughw:0 any.wav
> > >>>>
> > >>>>
> > >>>> 2009/11/4 Lars Zobbe <fedesensfar at gmail.com>
> > >>>>
> > >>>> > Hi Raymond.
> > >>>> >
> > >>>> > I so sorry Raymond. But I'm not sure what to do with this info. Is
> > >>>> there
> > >>>> > something more I have to tell you? Is there anything I can do to
> make
> > >>>> > pulseaudio able to detect via udev? Can I copy-paste that bit of
> code
> > >>>> you
> > >>>> > sent me somewhere?
> > >>>> > Please tell me if there's more you need to know.
> > >>>> > Greetings.
> > >>>> > Lars.
> > >>>> >
> > >>>> >
> > >>>> >
> > >>>> >
> > >>>> > On Tue, Nov 3, 2009 at 7:48 AM, Raymond Yau <
> > >>>> superquad.vortex2 at gmail.com>wrote:
> > >>>> >
> > >>>> >> I guess route plugin used by RME96*.conf does not support mmap
> when
> > >>>> there
> > >>>> >> is
> > >>>> >> channel conversion since minimum channels supported by hdsp is 14
> > >>>> >>
> > >>>> >>
> > >>>> >> static struct snd_pcm_hardware snd_hdsp_playback_subinfo =
> > >>>> >> {
> > >>>> >> .info = (SNDRV_PCM_INFO_MMAP |
> > >>>> >> SNDRV_PCM_INFO_MMAP_VALID |
> > >>>> >> SNDRV_PCM_INFO_NONINTERLEAVED |
> > >>>> >> SNDRV_PCM_INFO_SYNC_START |
> > >>>> >> SNDRV_PCM_INFO_DOUBLE),
> > >>>> >> #ifdef SNDRV_BIG_ENDIAN
> > >>>> >> .formats = SNDRV_PCM_FMTBIT_S32_BE,
> > >>>> >> #else
> > >>>> >> .formats = SNDRV_PCM_FMTBIT_S32_LE,
> > >>>> >> #endif
> > >>>> >> .rates = (SNDRV_PCM_RATE_32000 |
> > >>>> >> SNDRV_PCM_RATE_44100 |
> > >>>> >> SNDRV_PCM_RATE_48000 |
> > >>>> >> SNDRV_PCM_RATE_64000 |
> > >>>> >> SNDRV_PCM_RATE_88200 |
> > >>>> >> SNDRV_PCM_RATE_96000),
> > >>>> >> .rate_min = 32000,
> > >>>> >> .rate_max = 96000,
> > >>>> >> .channels_min = 14,
> > >>>> >> .channels_max = HDSP_MAX_CHANNELS,
> > >>>> >> .buffer_bytes_max = HDSP_CHANNEL_BUFFER_BYTES *
> HDSP_MAX_CHANNELS,
> > >>>> >> .period_bytes_min = (64 * 4) * 10,
> > >>>> >> .period_bytes_max = (8192 * 4) * HDSP_MAX_CHANNELS,
> > >>>> >> .periods_min = 2,
> > >>>> >> .periods_max = 2,
> > >>>> >> .fifo_size = 0
> > >>>> >> };
> > >>>> >>
> > >>>> >> 2009/11/2 Lars Zobbe <fedesensfar at gmail.com>
> > >>>> >>
> > >>>> >> > Hi.
> > >>>> >> >
> > >>>> >> > Talking to one of the pulseaudio developers (*Colin Guthrie*)
> about
> > >>>> a
> > >>>> >> > problem with pulseaudio loading modules and my sound card (RME
> HDSP
> > >>>> >> 9632),
> > >>>> >> > I
> > >>>> >> > was adviced to inform you about the problem.
> > >>>> >> >
> > >>>> >> > I'm on ubuntu 9.10, 64bit, kernel 2.6.31 with an amd64 x2 3800+
> > >>>> >> processor.
> > >>>> >> >
> > >>>> >> >
> > >>>> >> > Symptoms are:
> > >>>> >> > Can only make pulseaudio load modules with the deprecated
> > >>>> load-module
> > >>>> >> > module-detect command, module-udev-detect doesn't detect
> anything
> > >>>> (no
> > >>>> >> sound
> > >>>> >> > - only null sink output in padevchooser).
> > >>>> >> > I get terrible stuttering.
> > >>>> >> > I can remove pulseaudio and make things work, more or less.
> > >>>> However,
> > >>>> >> that
> > >>>> >> > leaves me without software mixing and apps fighting for the
> rights
> > >>>> to
> > >>>> >> make
> > >>>> >> > sound. And more inconveniences (fx. no volume-control).
> > >>>> >> > I can play sound from audacity without stuttering by choosing
> the
> > >>>> >> cardname
> > >>>> >> > directly in output HDSP, not ALSA, not pulseaudio.
> > >>>> >> >
> > >>>> >> >
> > >>>> >> > When trying to run alsa-info.sh I get a lot of "not found"
> errors.
> > >>>> So
> > >>>> >> > you'll
> > >>>> >> > get some manual info (they might have moved som files around in
> > >>>> ubuntu
> > >>>> >> > 9.10).
> > >>>> >> >
> > >>>> >> > This is part of my syslog during a boot. (I did the formatting
> to
> > >>>> bold).
> > >>>> >> >
> > >>>> >> > Nov 2 10:57:32 lars-desktop pulseaudio[1524]: module.c:
> > >>>> module-detect
> > >>>> >> is
> > >>>> >> > deprecated: Please use module-udev-detect instead of
> module-detect!
> > >>>> >> > Nov 2 10:57:37 lars-desktop pulseaudio[1524]: ratelimit.c: 27
> > >>>> events
> > >>>> >> > suppressed
> > >>>> >> > Nov 2 10:57:39 lars-desktop pulseaudio[1612]: module.c:
> > >>>> module-detect
> > >>>> >> is
> > >>>> >> > deprecated: Please use module-udev-detect instead of
> module-detect!
> > >>>> >> > Nov 2 10:57:44 lars-desktop pulseaudio[1612]: ratelimit.c: 23
> > >>>> events
> > >>>> >> > suppressed
> > >>>> >> > Nov 2 10:57:44 lars-desktop pulseaudio[1612]: alsa-sink.c:
> ALSA
> > >>>> woke us
> > >>>> >> up
> > >>>> >> > to write new data to the device, but there was actually nothing
> to
> > >>>> >> write!
> > >>>> >> > Nov 2 10:57:44 lars-desktop pulseaudio[1612]: alsa-sink.c:
> *Most
> > >>>> likely
> > >>>> >> > this is a bug in the ALSA driver 'snd_hdsp'. Please report this
> > >>>> issue to
> > >>>> >> > the
> > >>>> >> > ALSA developers.*
> > >>>> >> > Nov 2 10:57:44 lars-desktop pulseaudio[1612]: alsa-sink.c: We
> were
> > >>>> >> woken
> > >>>> >> > up
> > >>>> >> > with POLLOUT set -- however a subsequent snd_pcm_avail()
> returned 0
> > >>>> or
> > >>>> >> > another value < min_avail.
> > >>>> >> > Nov 2 10:57:49 lars-desktop pulseaudio[1612]: ratelimit.c: 99
> > >>>> events
> > >>>> >> > suppressed
> > >>>> >> >
> > >>>> >> > Later if I try to play audio I get terrible skipping or
> stuttering
> > >>>> and
> > >>>> >> my
> > >>>> >> > syslog (in less than a minute) writes:
> > >>>> >> > Nov 2 11:55:16 lars-desktop pulseaudio[1612]: ratelimit.c: 16
> > >>>> events
> > >>>> >> > suppressed
> > >>>> >> > Nov 2 11:55:21 lars-desktop pulseaudio[1612]: ratelimit.c: 34
> > >>>> events
> > >>>> >> > suppressed
> > >>>> >> > Nov 2 11:55:26 lars-desktop pulseaudio[1612]: ratelimit.c: 70
> > >>>> events
> > >>>> >> > suppressed
> > >>>> >> > Nov 2 11:55:31 lars-desktop pulseaudio[1612]: ratelimit.c: 29
> > >>>> events
> > >>>> >> > suppressed
> > >>>> >> > Nov 2 11:55:36 lars-desktop pulseaudio[1612]: ratelimit.c: 43
> > >>>> events
> > >>>> >> > suppressed
> > >>>> >> > Nov 2 11:55:41 lars-desktop pulseaudio[1612]: ratelimit.c: 161
> > >>>> events
> > >>>> >> > suppressed
> > >>>> >> > Nov 2 11:55:46 lars-desktop pulseaudio[1612]: ratelimit.c: 28
> > >>>> events
> > >>>> >> > suppressed
> > >>>> >> > Nov 2 11:55:51 lars-desktop pulseaudio[1612]: ratelimit.c: 18
> > >>>> events
> > >>>> >> > suppressed
> > >>>> >> > Nov 2 11:55:56 lars-desktop pulseaudio[1612]: ratelimit.c: 16
> > >>>> events
> > >>>> >> > suppressed
> > >>>> >> >
> > >>>> >> > Here's the relevant part (concerning my sound card) of lspci
> -vvv
> > >>>> >> >
> > >>>> >> > 02:09.0 Multimedia audio controller: Xilinx Corporation RME
> > >>>> Hammerfall
> > >>>> >> DSP
> > >>>> >> > (rev 9a)
> > >>>> >> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> > >>>> ParErr-
> > >>>> >> > Stepping- SERR- FastB2B- DisINTx-
> > >>>> >> > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort-
> > >>>> >> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > >>>> >> > Latency: 255
> > >>>> >> > Interrupt: pin A routed to IRQ 19
> > >>>> >> > Region 0: Memory at fdff0000 (32-bit, non-prefetchable)
> > >>>> [size=64K]
> > >>>> >> > Kernel driver in use: RME Hammerfall DSP
> > >>>> >> > Kernel modules: snd-hdsp
> > >>>> >> >
> > >>>> >> > And:
> > >>>> >> > lars at lars-desktop:~$ aplay -l
> > >>>> >> > **** List of PLAYBACK Hardware Devices ****
> > >>>> >> > card 0: DSP [Hammerfall DSP], device 0: RME Hammerfall HDSP
> 9632
> > >>>> [RME
> > >>>> >> > Hammerfall HDSP 9632]
> > >>>> >> > Subdevices: 1/1
> > >>>> >> > Subdevice #0: subdevice #0
> > >>>> >> >
> > >>>> >> >
> > >>>> >> > lars at lars-desktop:~$ cat /proc/asound/version
> > >>>> >> > Advanced Linux Sound Architecture Driver Version 1.0.21.
> > >>>> >> > Compiled on Oct 15 2009 for kernel 2.6.31-14-generic (SMP).
> > >>>> >> >
> > >>>> >> > lars at lars-desktop:~$ cat /proc/asound/cards
> > >>>> >> > 0 [DSP ]: H-DSP - Hammerfall DSP
> > >>>> >> > RME Hammerfall HDSP 9632 at 0xfdff0000,
> irq 19
> > >>>> >> >
> > >>>> >> >
> > >>>> >> > lars at lars-desktop:~$ cat /proc/asound/modules
> > >>>> >> > 0 snd_hdsp
> > >>>> >> >
> > >>>> >> > I don't have .asound.conf files.
> > >>>> >> >
> > >>>> >> > lars at lars-desktop:~$ hdsploader
> > >>>> >> > hdsploader - firmware loader for RME Hammerfall DSP cards
> > >>>> >> > Looking for HDSP + Multiface or Digiface cards :
> > >>>> >> > Card 0 : RME Hammerfall HDSP 9632 at 0xfdff0000, irq 19
> > >>>> >> >
> > >>>> >> > And of course. My computer makes no sound if I don't load the
> > >>>> hdspmixer
> > >>>> >> at
> > >>>> >> > startup. I guess that's just normal for this card though.
> > >>>> >> >
> > >>>> >> > Please let me know, if you need more info. I really hope you
> can
> > >>>> help
> > >>>> >> out
> > >>>> >> > here. And that this might help you to.
> > >>>> >> >
> > >>>> >> > Thanks for the great work you do. Greetings.
> > >>>> >> > Lars Zobbe.
> > >>>> >> > _______________________________________________
> > >>>> >> > Alsa-devel mailing list
> > >>>> >> > Alsa-devel at alsa-project.org
> > >>>> >> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > >>>> >> >
> > >>>> >> _______________________________________________
> > >>>> >> Alsa-devel mailing list
> > >>>> >> Alsa-devel at alsa-project.org
> > >>>> >> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > >>>> >>
> > >>>> >
> > >>>> >
> > >>>> _______________________________________________
> > >>>> Alsa-devel mailing list
> > >>>> Alsa-devel at alsa-project.org
> > >>>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > >>>>
> > >>>
> > >>>
> > >>
> > >
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel at alsa-project.org
> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> >
>
More information about the Alsa-devel
mailing list