[alsa-devel] [[ALSA] Patch for HP dv4-1222nr laptop 1/1] Addition for HP dv4-1222nr laptop.
Takashi Iwai
tiwai at suse.de
Mon May 4 09:07:45 CEST 2009
At Sun, 3 May 2009 04:00:44 -0400,
renidragsemaj at yahoo.com wrote:
>
> From: James Gardiner <renidragsemaj at yahoo.com>
>
>
> Signed-off-by: James Gardiner <renidragsemaj at yahoo.com>
Applied now. Thanks.
Takashi
> diff --git a/pci/hda/patch_sigmatel.c b/pci/hda/patch_sigmatel.c
> index 917bc5d..27bc568 100644
> --- a/pci/hda/patch_sigmatel.c
> +++ b/pci/hda/patch_sigmatel.c
> @@ -100,6 +100,7 @@ enum {
> STAC_HP_M4,
> STAC_HP_DV5,
> STAC_HP_HDX,
> + STAC_HP_DV4_1222NR,
> STAC_92HD71BXX_MODELS
> };
>
> @@ -1836,6 +1837,7 @@ static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = {
> [STAC_HP_M4] = NULL,
> [STAC_HP_DV5] = NULL,
> [STAC_HP_HDX] = NULL,
> + [STAC_HP_DV4_1222NR] = NULL,
> };
>
> static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = {
> @@ -1847,6 +1849,7 @@ static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = {
> [STAC_HP_M4] = "hp-m4",
> [STAC_HP_DV5] = "hp-dv5",
> [STAC_HP_HDX] = "hp-hdx",
> + [STAC_HP_DV4_1222NR] = "hp-dv4-1222nr",
> };
>
> static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
> @@ -1855,6 +1858,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
> "DFI LanParty", STAC_92HD71BXX_REF),
> SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101,
> "DFI LanParty", STAC_92HD71BXX_REF),
> + SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb,
> + "HP dv4-1222nr", STAC_HP_DV4_1222NR),
> SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3080,
> "HP", STAC_HP_DV5),
> SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0,
> @@ -4520,27 +4525,38 @@ static int stac92xx_resume(struct hda_codec *codec)
> return 0;
> }
>
> -
> /*
> - * using power check for controlling mute led of HP HDX notebooks
> + * using power check for controlling mute led of HP notebooks
> * check for mute state only on Speakers (nid = 0x10)
> *
> * For this feature CONFIG_SND_HDA_POWER_SAVE is needed, otherwise
> * the LED is NOT working properly !
> + *
> + * Changed name to reflect that it now works for any designated
> + * model, not just HP HDX.
> */
>
> #ifdef CONFIG_SND_HDA_POWER_SAVE
> -static int stac92xx_hp_hdx_check_power_status(struct hda_codec *codec,
> +static int stac92xx_hp_check_power_status(struct hda_codec *codec,
> hda_nid_t nid)
> {
> struct sigmatel_spec *spec = codec->spec;
> + unsigned int gpio_bit = 0; /* gets rid of compiler warning */
> +
> + switch (spec->board_config) {
> + case STAC_HP_DV4_1222NR:
> + gpio_bit = 0x01;
> + break;
> + case STAC_HP_HDX:
> + gpio_bit = 0x08;
> + }
>
> if (nid == 0x10) {
> if (snd_hda_codec_amp_read(codec, nid, 0, HDA_OUTPUT, 0) &
> HDA_AMP_MUTE)
> - spec->gpio_data &= ~0x08; /* orange */
> + spec->gpio_data &= ~gpio_bit; /* orange */
> else
> - spec->gpio_data |= 0x08; /* white */
> + spec->gpio_data |= gpio_bit; /* white */
>
> stac_gpio_set(codec, spec->gpio_mask,
> spec->gpio_dir,
> @@ -5219,6 +5235,22 @@ again:
> spec->num_smuxes = 0;
> spec->num_dmuxes = 1;
> break;
> + case STAC_HP_DV4_1222NR:
> + spec->num_dmics = 1;
> + /* I don't know if it needs 1 or 2 smuxes - will wait for
> + * bug reports to fix if needed
> + */
> + spec->num_smuxes = 1;
> + spec->num_dmuxes = 1;
> +#ifdef CONFIG_SND_HDA_POWER_SAVE
> + /* This controls MUTE LED */
> + spec->gpio_mask |= 0x01;
> + spec->gpio_dir |= 0x01;
> + spec->gpio_data |= 0x01;
> + codec->patch_ops.check_power_status =
> + stac92xx_hp_check_power_status;
> +#endif
> + /* fallthrough */
> case STAC_HP_DV5:
> snd_hda_codec_set_pincfg(codec, 0x0d, 0x90170010);
> stac92xx_auto_set_pinctl(codec, 0x0d, AC_PINCTL_OUT_EN);
> @@ -5239,7 +5271,7 @@ again:
>
> /* register check_power_status callback. */
> codec->patch_ops.check_power_status =
> - stac92xx_hp_hdx_check_power_status;
> + stac92xx_hp_check_power_status;
> #endif
> break;
> };
> --
> 1.5.6.3
>
More information about the Alsa-devel
mailing list