[alsa-devel] Bugs on aspire one A150

Maxim Levitsky maximlevitsky at gmail.com
Tue Mar 17 12:30:12 CET 2009


On Tue, 2009-03-17 at 08:57 +0100, Takashi Iwai wrote:
> At Tue, 17 Mar 2009 02:52:19 +0200,
> Maxim Levitsky wrote:
> > 
> > On Mon, 2009-03-16 at 22:22 +0100, Andreas Mohr wrote:
> > > Hi,
> > > 
> > > On Mon, Mar 16, 2009 at 09:28:39PM +0100, Takashi Iwai wrote:
> > > > At Mon, 16 Mar 2009 19:06:38 +0100,
> > > > Andreas Mohr wrote:
> > > > > I just tried connecting a headset and switching to E-Mic.
> > > > > What I can say is:
> > > > > - opposite levels does NOT happen there (E-Mic is "analog micro"-based, right?)
> > > > > - leaving E-Mic unplugged will actually record from i-Mic (due to properly
> > > > >   working EAPD mechanism, right?)
> > > > 
> > > > The record from mic-jack is via analog path.  The phase-inversion
> > > > appears only for digital-mic, AFAIK.
> > > 
> > > Thought so.
> > > 
> > > > > One question still: is this a hardware defect (i.e. could this possibly
> > > > > be swapped cables of the microphone connector in this model or so?
> > > > > Not plausible but...), or is this an existing property
> > > > > of the HDA's dig-mic base? You indicated it's the latter I think...
> > > > 
> > > > My guess is that it's a hardware implementation.
> > > > Maybe for the noise suppression via mic array.
> > > 
> > > Not sure what this means.
> > > 
> > > > The question is whether the left / right channels recorded from
> > > > digital mic are really raw data, or they are for modified data
> > > > (for differential, etc)...  It's hard to guess without the actual
> > > > data.
> > > 
> > > I don't quite follow you here. Is there anything I could do about this?
> > > 
> > > Thanks,
> > > 
> > > Andreas
> > 
> > 
> > What about exposing the i-mic as a mono only device to userspace?
> > It is mono after all?
> 
> No, it's a mic-array.  And HD-audio cannot handle a mono stream.
No problem.
Lets just lie to usespace that it is mono, in kernel driver can pick one
of channels?

Maybe this is an array, but this doesn't explain the 'quality' of it.
It is so low (in windows too).

Best regards,
	Maxim Levitsky



More information about the Alsa-devel mailing list