[alsa-devel] SB X-Fi driver fixes (Re: Testers wanted: New SB X-Fi driver)

[Bjoern Olausson]

On Mon, Jun 15, 2009 at 18:17, Gernot
Kohlhaas<gernot.kohlhaas at googlemail.com> wrote:
>
> No crashes. Everything's running fine now :)
> Thank you very much!
>

Just want to confirm that my card (listed below) works so far (with
2.6.31-rc1-git3)

On the first module load I got a mesage (I can't remember exactly)
something like that:
"XFI" "??" "  " ""
Unknown hardware... and something with initialization method, but I
could'nt reproduce this message.

But the first tests with aplay (using all sorts of samplerates) were promising!

01:00.0 Multimedia audio controller: Creative Labs SB X-Fi
        Subsystem: Creative Labs X-Fi Platinum
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (1000ns min, 1250ns max), Cache Line Size: 16
bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at 8c00 [size=32]
        Region 1: Memory at eb800000 (64-bit, non-prefetchable)
[size=2M]
        Region 3: Memory at e4000000 (64-bit, non-prefetchable)
[size=64M]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Count=1/1 Enable-
                Address: 0000000000000000  Data: 0000

01:00.0 0401: 1102:0005
        Subsystem: 1102:0021
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (1000ns min, 1250ns max), Cache Line Size: 16
bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at 8c00 [size=32]
        Region 1: Memory at eb800000 (64-bit, non-prefetchable)
[size=2M]
        Region 3: Memory at e4000000 (64-bit, non-prefetchable)
[size=64M]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Count=1/1 Enable-
                Address: 0000000000000000  Data: 0000

Thanks a lot

kind regrads
Bjoern