[alsa-devel] RFC: ASoC driver for S3C24XX Simtec boards

[Mark Brown]

On Fri, Jun 26, 2009 at 09:46:26AM +0100, Ben Dooks wrote:
> On Thu, Jun 25, 2009 at 12:26:59PM +0100, Mark Brown wrote:

> > If you need to give manual control of this to user space use a
> > DAPM_SOC_PIN_SWITCH widget.  Normally there's no need to do this since

...

> > This looks like a SND_SOC_DAPM_SPK(); using that will help with
> > sequencing.

> thanks, changed. still no output in the alsactl control dump though.

Like I say, you need to use a pin switch if you want to add manual
control.

> I'll have to add it in the resume path as well.

So on probe and resume, then?