[alsa-devel] Regarding Sound on Acer Aspire 6935G
Takashi Iwai
tiwai at suse.de
Sat Jun 6 11:05:32 CEST 2009
At Sat, 6 Jun 2009 00:20:18 -0300,
Emilio López wrote:
>
> Takashi, were you able to have a look at it?
Sorry, no time.
> Any idea on what might be going
> on? I guess this is an easy to fix issue, as it worked with the old mode, the
> channel might just need registering or something.
You can try another one, the recently added model acer-aspire-8930g.
Takashi
>
> Thanks!
>
> 2009/5/29 Emilio López <buhitoescolar at gmail.com>
>
> 2009/5/27 Takashi Iwai <tiwai at suse.de>
>
> At Wed, 27 May 2009 22:54:09 +0200,
> I wrote:
> >
> > At Wed, 27 May 2009 16:27:00 -0300,
> > Emilio López wrote:
> > >
> > > Did my last email arrive? Any idea on what might be going on?
> >
> > Sorry, no time for this right now.
> > It's usually just a missing channel connection or the lack of
> > the corresponding amp control. In most cases, it's trivial if
> someone
> > with a knowledge of HD-audio spec sees it...
>
> Just took a quick look now, I found that you didn't unmute "Side
> Playback Switch" in the disabled case. Do you mean that as
> "disabled"?
>
> Disabled = Muted = Off, Enabled = Unmuted = On. So sound works on enabled,
> doesn't work on disabled.
>
> I assume that these files are from the "old" driver with the bass
> working as Side volume. Is it correct?
>
> Yes
>
> thanks,
>
> Takashi
>
> Thanks for having a look at it :)
>
> Emilio
>
>
>
> > Takashi
> >
> > >
> > > Emilio
> > >
> > > 2009/5/24 Emilio López <buhitoescolar at gmail.com>
> > >
> > > Well, it seems my last email was too heavy with the 4 files
> attached. I
> > > have uploaded them to drop.io, here is the link: http://
> drop.io/
> > > alsaonaceraspire6930
> > >
> > > Thanks!
> > >
> > > 2009/5/23 Emilio López <buhitoescolar at gmail.com>
> > >
> > > Here you are, I ran alsa-info.sh in the old alsa (with
> model=acer) and
> > > saved the output of the script when side was enabled and
> disabled,
> > > with volumes 0 and 100. Hope you can work out the problem
> with this,
> > > do not hesitate to ask for more debug info if you need.
> > >
> > > Thanks for all!
> > >
> > > Emilio
> > >
> > > PS: On my previous email (cited below) I wrote "Mic
> sensing"
> > > incorrectly, I wanted to write "headphones sensing".
> > >
> > > 2009/5/23 Takashi Iwai <tiwai at suse.de>
> > >
> > > At Sat, 23 May 2009 12:19:12 -0300,
> > > Emilio López wrote:
> > > >
> > > > I reinstalled 1.0.20 today and almost everything
> started working
> > > when I set
> > > > model=acer-aspire-4930g. Mic sensing works, my mic
> now records
> > > too. But my
> > > > bass does not, and I cannot control it with "Side"
> anymore.
> > > >
> > > > Any idea on how to fix it? The audio setup for this
> laptop will
> > > be fully
> > > > working when I get the bass to play once again.
> > >
> > > Could you check with the older version and what "Side"
> control
> > > changes
> > > in hd-audio codec registers? You can just get
> alsa-info.sh output
> > > before and after changing the "Side" control value.
> > >
> > > thanks,
> > >
> > > Takashi
> > >
> > >
>
>
More information about the Alsa-devel
mailing list