No subject

Fri Jul 31 19:24:53 CEST 2009

Pin Name   #  Pin Description
--------  --  ----------------------------------------------------------
AD0/nCS   13  Address Bit 0 (I2S)/Control Port Chip Select (SPI) (Input)
              - AD0 is a chip address pin in I2C mode; nCS is the chip
              signal select for SPI format.

The other pin in question:

Pin Name   #  Pin Description
--------  --  ----------------------------------------------------------
nRST      14  Reset (Input) - The device enters a low power mode when
              this pin is driven low.

Regards,
Hartley=