No subject
Fri Jul 31 19:24:53 CEST 2009
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x90100141: [Fixed] Speaker at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x4, Sequence = 0x1
Misc = NO_PRESENCE
Pin-ctls: 0x41: OUT VREF_50
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
seems this Node is listed as: [Fixed] Speaker while 0x15
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x018b3020: [Jack] Line In at Ext Rear
Conn = Comb, Color = Blue
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x01: VREF_50
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c 0x0d* 0x0e 0x0f 0x26
is [Jack] Line In at Ext Rear.
(looking at the other apple products as examples
I came up with the fix below).
Second issue:
alc885_mbp_4ch_modes
The original patch does a good job with the
HP pin automute function, but from what I noticed is I would have to manually
change the channel form 2 to 4 after plugging the headphones in.
And not to mention having odd moments to where I was jamming out
with the headphones on, then later realized I had sound blasting out
of the speakers as well. My findings revealed that changing
alc885_mbp_4ch_modes to alc885_mba21_ch_modes and setting
- spec->autocfg.speaker_pins[0] = 0x15;
+ spec->autocfg.speaker_pins[0] = 0x18;
gets the automute function when the headphones plugged in working
flawlessly(and the no need to manually change the channel number
afterwards).
Third issue:
alc885_imac91_mixer
There probably doesnt need to be anything changed with this
(esspecially if your one to like lots of sliders),but my findings
revealed that mac osx only has a master on the top right,
another switch on itunes, and then a slider for the mic.
So the changes I did below try and mimic osx as much as possible
(only thing I had an issue with is just having one mute switch
on the master, instead of having two(still investigating)).
fourth issue:
alc882_capture_source
I endeded up creating alc889A_imac91_capture_source()
only because looking at alc882_capture_source I see
that the mic is set to 0x1 while this works, I also noticed
that adding 0x1 and 0x01 and testing that 0x1 somehow
stops working, and 0x01 works(so I figured 0x01 was more
of the alpha of the numbers(still need to figure out
where that valuse is)). In any case the microphone
does work with the original, and with the below patch, but both
still record not as clean(lots of "Noise", which I would like to
look into too).
Note: using alsamixer -Va reveals the capture switches.
Overall the original patch is good, the below patch does
(hopefully)address some issues, if it's too much of a change
I can go back, and just adjust the verb pins on the original
and just call it that..(main thing over here is I don't have
the "Noise" coming out of the speakers(and music sounds good)...
cheers..
Signed-off-by: Justin P. Mattock <justinmattock at gmail.com>
---
sound/pci/hda/patch_realtek.c | 84 +++++++++++++++++++---------------------
1 files changed, 40 insertions(+), 44 deletions(-)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 886d8e4..d8adea3 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6937,6 +6937,14 @@ static struct hda_input_mux alc889A_mb31_capture_source = {
},
};
+static struct hda_input_mux alc889A_imac91_capture_source = {
+ .num_items = 2,
+ .items = {
+ { "Mic", 0x01 },
+ { "Line", 0x2 }, /* Not sure! */
+ },
+};
+
/*
* 2ch mode
*/
@@ -7398,15 +7406,8 @@ static struct snd_kcontrol_new alc885_macmini3_mixer[] = {
};
static struct snd_kcontrol_new alc885_imac91_mixer[] = {
- HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
- HDA_BIND_MUTE ("Line-Out Playback Switch", 0x0c, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE ("Speaker Playback Switch", 0x14, 0x00, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
- HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
- HDA_CODEC_MUTE ("Mic Playback Switch", 0x0b, 0x00, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x00, HDA_INPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE("Speaker Playback Switch", 0x0c, 0x02, HDA_INPUT),
{ } /* end */
};
@@ -7907,61 +7908,56 @@ static struct hda_verb alc885_mbp3_init_verbs[] = {
/* iMac 9,1 */
static struct hda_verb alc885_imac91_init_verbs[] = {
- /* Line-Out mixer: unmute input/output amp left and right (volume = 0) */
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* Rear mixer */
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
- {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
- /* HP Pin: output 0 (0x0c) */
+ /* Internal Speaker Pin (0x0c) */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, (PIN_OUT | AC_PINCTL_VREF_50) },
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x18, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, (PIN_OUT | AC_PINCTL_VREF_50) },
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x1a, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* HP Pin: Rear */
{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
- /* Internal Speakers: output 0 (0x0d) */
- {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, (ALC880_HP_EVENT | AC_USRSP_EN)},
+ /* Line in Rear */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_VREF_50},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* Mic (rear) pin: input vref at 80% */
- {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
- {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
/* Front Mic pin: input vref at 80% */
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- /* Line In pin: use output 1 when in LineOut mode */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
- {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
- {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
-
- /* FIXME: use matrix-type input source selection */
- /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
- /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ /* Rear mixer */
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Line-Out mixer: unmute input/output amp left and right (volume = 0) */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In */
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* Input mixer2 */
+ /* 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In */
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* Input mixer3 */
+ /* 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In */
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
- /* ADC1: mute amp left and right */
+ /* 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In */
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* ADC2: mute amp left and right */
+ /* 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In */
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
- /* ADC3: mute amp left and right */
+ /* 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In */
{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
-
{ }
};
@@ -8030,7 +8026,7 @@ static void alc885_imac91_setup(struct hda_codec *codec)
struct alc_spec *spec = codec->spec;
spec->autocfg.hp_pins[0] = 0x14;
- spec->autocfg.speaker_pins[0] = 0x15;
+ spec->autocfg.speaker_pins[0] = 0x18;
spec->autocfg.speaker_pins[1] = 0x1a;
}
@@ -9539,14 +9535,14 @@ static struct alc_config_preset alc882_presets[] = {
.init_hook = alc885_imac24_init_hook,
},
[ALC885_IMAC91] = {
- .mixers = { alc885_imac91_mixer, alc882_chmode_mixer },
+ .mixers = {alc885_imac91_mixer},
.init_verbs = { alc885_imac91_init_verbs,
alc880_gpio1_init_verbs },
.num_dacs = ARRAY_SIZE(alc882_dac_nids),
.dac_nids = alc882_dac_nids,
- .channel_mode = alc885_mbp_4ch_modes,
- .num_channel_mode = ARRAY_SIZE(alc885_mbp_4ch_modes),
- .input_mux = &alc882_capture_source,
+ .channel_mode = alc885_mba21_ch_modes,
+ .num_channel_mode = ARRAY_SIZE(alc885_mba21_ch_modes),
+ .input_mux = &alc889A_imac91_capture_source,
.dig_out_nid = ALC882_DIGOUT_NID,
.dig_in_nid = ALC882_DIGIN_NID,
.unsol_event = alc_automute_amp_unsol_event,
--
1.7.1.rc1.21.gf3bd6
More information about the Alsa-devel
mailing list