[alsa-devel] Testers wanted: New SB X-Fi driver
Ted T. Logan
tedtheologian at gmail.com
Mon Jul 20 02:38:59 CEST 2009
Thanks.
Basically the driver from creative, the old one, works without clicks:
XFiDrv_Linux_US-1.18.tar.gz
>From April, 2008
and this one works without clicks.
XFiDrv_Linux_Public_US_1.00.tar.gz
lspci lists it as:
03:03.0 Multimedia audio controller: Creative Labs SB X-Fi
and in xp, it uses the same x-fi drivers as the others.
I have never been able to get any driver you released to work with it.
Can you tell me the first driver you had that you recommend I test it
with?
On Sun, 2009-07-19 at 18:01 +0200, Takashi Iwai wrote:
> At Sun, 19 Jul 2009 10:35:21 -0500,
> Ted T. Logan wrote:
> >
> > Maybe you haven't been following the thread. I've been trying to debug the
> > problem. As I mentioned to Takashi, there's not a point where it broke, it
> > never worked with this driver.
> > There have always been clicks.
> >
> > However, it does not have clicks with the following driver:
> > XFiDrv_Linux_Public_US_1.00.tar.gz
> >
> > Sending out condescending messages like this after I was responding to the
> > "testers wanted" mailer which said all cards should be supported now is
> > completely unproductive.
>
> Well, the current situation is that I've got no other report but you
> regarding the specific problem. There is a known issue with openal,
> accordingly, but not all apps. So, this is very likely a different
> issue.
>
> Actually, it's still the phase to gather all information to know which
> part exactly is problematic. If you find any other guys that have the
> exact same problem, let me know. It would make easier to find out a
> problem pattern, either for finding out the culprit or reproducing the
> problem.
>
> Or, you can do trial-and-error by comparing the driver above and the
> current one (maybe the first committed version is easier to compare).
> This can't be done without the real hardware, so it's actually up to
> you how to fix the issue...
>
>
> Takashi
>
> >
> > On Thu, 2009-07-16 at 12:20 -0700, John L. Utz III wrote:
> >
> > Debug the problem, write code that fixes it and then send in a patch.
> > That's why this is the alsa *developers* mailing list.
> >
> > Ted T. Logan wrote:
> > > Takashi, please, what must I do to get your xfi driver to stop clicking?
> > >
> > > On Thu, 2009-07-16 at 11:22 +0200, Takashi Iwai wrote:
> > >
> > >> At Wed, 15 Jul 2009 12:55:23 +0200,
> > >> Frashman wrote:
> > >>> Hi Takashi,
> > >>>
> > >>> first of all, thank you for developing this driver.
> > >>> I tested it today. It works, so far.
> > >>>
> > >>> But two annoying things. As you mentioned, I got problems, if the
> > >>> onboard sound modules are loaded. Then i get no sound out auf my xfi.
> > >> It's likely the collision of PCI device ID.
> > >> Some X-Fi models support both HD-audio and emu20kx-native modes. The
> > >> modes are switched by some magical sequence.
> > >>
> > >> Anyway, please run alsa-info.sh with --no-upload option, and attach
> > >> the generated file.
> > >>
> > >>> If I disable the loading of snd-hda-intel modules while booting, then it
> > >>> works.
> > >>>
> > >>> The second problem is, that SIDE and SURROUND connectors are
> > >>> interchanged. I'm absolutly sure, it works fine under windows and the
> > >>> connector colors are also correct.
> > >>>
> > >>> If I run speaker-test -c8 the SIDE Speakers sounds come out of my REAR
> > >>> (SURROUND) Speakers, while nothing is coming out of my rear speakers, if
> > >>> i'm using speaker-test -c6
> > >> So, the side channels (channel 7 & 8) and the rear channels (3 & 4)
> > >> are swapped when running with 8 channel mode?
> > >>
> > >>
> > >> Takashi
> > >> _______________________________________________
> > >> Alsa-devel mailing list
> > >> Alsa-devel at alsa-project.org
> > >> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > > _______________________________________________
> > > Alsa-devel mailing list
> > > Alsa-devel at alsa-project.org
> > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > >
> >
> >
More information about the Alsa-devel
mailing list