[alsa-devel] asoc: s3c24xx+uda1380 - some questions

[Mark Brown]

On Tue, Jan 27, 2009 at 05:19:53PM +0200, Vasily Khoruzhick wrote:

> Uh-oh, I didn't thought that it will be so complicated to decide when turn one 
> gpio line to 0 or 1 :) Btw, I'm thinking about using own write- and read- 
> wrappers for uda1380, in this way I can check on each read/write whether 
> codec power is enabled.

Are you really cutting all power to the codec or just the analogue
supplies?  Normally the digital is powered off a separate supply shared
with other bits of the system.

> > That sounds like something in the teardown path should be done on
> > startup as well.  Can't think of any obvious gotchas there, though I'd
> > be looking at the codec and machine drivers since the CPU driver for the
> > S3C24xx is used in quite a few designs.

> Sorry, but what is "teardown path"?

When playback is stopped.