[alsa-devel] idt blue jack patch

Paulo Cavalcanti promac at gmail.com
Wed Feb 18 03:04:31 CET 2009


On Mon, Feb 16, 2009 at 7:55 AM, Takashi Iwai <tiwai at suse.de> wrote:

> At Mon, 16 Feb 2009 06:13:35 -0300,
> Paulo Cavalcanti wrote:
> >
> > Hi,
> >
> > I received a patch form Fengguang that
> > made my Intel DG45ID (snd-hda-intel, codec IDT 92HD73E1X5)
> > behave the way it should, in my opinion.
> >
> > It just makes the blue jack behave as an input source by default (in alsa
> > 1.0.19 it is
> > an output jack).
> >
> > It is widespread that the green jack is output, the blue input and the
> pink
> > is mic.
> > Some cards allow reconfiguring the jacks in alsamixer, but the DG45ID
> > already has
> > an orange and black jacks for rear and center speakers, and a digital
> > output.
> >
> > Other people have also raised this problem some time ago:
> >
> >
> https://fcp.surfsite.org/modules/newbb/viewtopic.php?viewmode=threaded&order=ASC&topic_id=62855&forum=12&move=prev&topic_time=1224179600
> >
> > Fengguang suggested me to direct my request to the development list,
> > so the other developers could decide what to do.
> >
> > I would like to add that I can use the input source and the mic just fine
> > now
> > (the mic could be a bit louder, but it works fine with skype).
> >
> > The patch is very simple and is attached. This would conclude the fix
> > for this card, Takashi started with me some time ago (I just made the
> > tests).
>
> It's fine to put a quirk there.  But, you'd need to create a "model"
> for your device so that it won't interfere other devices.  That is,
> define a new model type, and call stac92xx_set_config_reg() with the
> check of spec->board_config.
>
>
This is easy. The problem is that I am already using model "no-jd",
remember?
In this case, if I used

        /* was 0x01113014 */
        if (spec->board_config > STAC_92HD73XX_NO_JD ) {
            stac92xx_set_config_reg(codec, 0x0c, 0x01813021);
        }

would be fine to me.

However, there is a possibility that all "stac92hd73xx" family needs
this quirk. In this case, no additional code is needed.

-- 
Paulo Roma Cavalcanti
LCG - UFRJ


More information about the Alsa-devel mailing list