[alsa-devel] [PATCH] hda: Add logic to force HP mixer creation

Takashi Iwai tiwai at suse.de
Mon Feb 16 10:08:38 CET 2009


At Sun, 15 Feb 2009 11:01:01 -0500,
Matthew Ranostay wrote:
> 
> In some instances like a laptop PCI_QUIRK you may want to force a
> headphone mixer otherwise a "Front" mixer would be in its place, this
> is to aid user friendlyness.
> 
> Signed-off-by: Matthew Ranostay <mranostay at embeddedalley.com>

Well, the change looks a bit too ad hoc.
Could you give alsa-info.sh output for this?


thanks,

Takashi

> ---
>  sound/pci/hda/patch_sigmatel.c |   25 ++++++++++++++++++-------
>  1 files changed, 18 insertions(+), 7 deletions(-)
> 
> diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
> index aeb5d21..e02a187 100644
> --- a/sound/pci/hda/patch_sigmatel.c
> +++ b/sound/pci/hda/patch_sigmatel.c
> @@ -168,6 +168,7 @@ struct sigmatel_spec {
>  	unsigned int surr_switch: 1;
>  	unsigned int alt_switch: 1;
>  	unsigned int hp_detect: 1;
> +	unsigned int hp_mixer: 1;
>  	unsigned int spdif_mute: 1;
>  	unsigned int check_volume_offset:1;
>  
> @@ -857,9 +858,9 @@ static struct hda_verb stac92hd73xx_10ch_core_init[] = {
>  };
>  
>  static struct hda_verb stac92hd83xxx_core_init[] = {
> -	{ 0xa, AC_VERB_SET_CONNECT_SEL, 0x1},
> -	{ 0xb, AC_VERB_SET_CONNECT_SEL, 0x1},
> -	{ 0xd, AC_VERB_SET_CONNECT_SEL, 0x0},
> +	{ 0xa, AC_VERB_SET_CONNECT_SEL, 0x0},
> +	{ 0xb, AC_VERB_SET_CONNECT_SEL, 0x0},
> +	{ 0xd, AC_VERB_SET_CONNECT_SEL, 0x1},
>  
>  	/* power state controls amps */
>  	{ 0x01, AC_VERB_SET_EAPD, 1 << 2},
> @@ -3115,12 +3116,12 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
>  		"Front", "Surround", NULL /*CLFE*/, "Side"
>  	};
>  	hda_nid_t nid = 0;
> -	int i, err;
> +	int i, idx = 0, err;
>  	unsigned int wid_caps;
>  
>  	for (i = 0; i < cfg->line_outs && spec->multiout.dac_nids[i]; i++) {
>  		nid = spec->multiout.dac_nids[i];
> -		if (i == 2) {
> +		if (idx == 2) {
>  			/* Center/LFE */
>  			err = create_controls(codec, "Center", nid, 1);
>  			if (err < 0)
> @@ -3139,9 +3140,9 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
>  				if (err < 0)
>  					return err;
>  			}
> -
> +			idx++;
>  		} else {
> -			const char *name = chname[i];
> +			const char *name = chname[idx];
>  			/* if it's a single DAC, assign a better name */
>  			if (!i && is_unique_dac(spec, nid)) {
>  				switch (cfg->line_out_type) {
> @@ -3153,6 +3154,10 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
>  					break;
>  				}
>  			}
> +			if (!i && spec->hp_mixer)
> +				name = "Headphone";
> +			else
> +				idx++;
>  			err = create_controls(codec, name, nid, 3);
>  			if (err < 0)
>  				return err;
> @@ -4894,6 +4899,12 @@ again:
>  		break;
>  	}
>  
> +	switch (spec->board_config) {
> +	case STAC_DELL_S14:
> +		spec->hp_mixer = 1;
> +		break;
> +	}
> +
>  	err = stac92xx_parse_auto_config(codec, 0x1d, 0);
>  	if (!err) {
>  		if (spec->board_config < 0) {
> -- 
> 1.5.6.3
> 


More information about the Alsa-devel mailing list