[alsa-devel] [PATCH] jazz16: refine dma and irq selection
Krzysztof Helt
krzysztof.h1 at poczta.fm
Wed Dec 23 18:02:41 CET 2009
From: Krzysztof Helt <krzysztof.h1 at wp.pl>
Narrow the dma and irq selection after the DOS driver.
Add ALSA configuration description as well.
Signed-off-by: Krzysztof Helt <krzysztof.h1 at wp.pl>
---
The dma8 must be 8-bit otherwise the 8-bit sound played
through 16-bit dma has metalic noise. The 8-bit DMA cannot
play 16-bit sound.
Documentation/sound/alsa/ALSA-Configuration.txt | 15 +++++++++++++++
sound/isa/sb/jazz16.c | 21 ++++++++++++++++++++-
sound/isa/sb/sb8_main.c | 3 ++-
3 files changed, 37 insertions(+), 2 deletions(-)
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 8923597..92b0975 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1123,6 +1123,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
This module supports multiple cards, autoprobe and ISA PnP.
+ Module snd-jazz16
+ -------------------
+
+ Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips:
+ MVD1216 + MVA416 + MVA514.
+
+ port - port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260)
+ irq - IRQ # for SB DSP chip (3,5,7,9,10,15)
+ dma8 - DMA # for SB DSP chip (1,3)
+ dma16 - DMA # for SB DSP chip (5,7)
+ mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330)
+ mpu_irq - MPU-401 irq # (2,3,5,7)
+
+ This module supports multiple cards.
+
Module snd-korg1212
-------------------
diff --git a/sound/isa/sb/jazz16.c b/sound/isa/sb/jazz16.c
index d52966b..8d21a3f 100644
--- a/sound/isa/sb/jazz16.c
+++ b/sound/isa/sb/jazz16.c
@@ -189,10 +189,29 @@ static int __devinit snd_jazz16_match(struct device *devptr, unsigned int dev)
if (port[dev] == SNDRV_AUTO_PORT) {
snd_printk(KERN_ERR "please specify port\n");
return 0;
+ } else if (port[dev] == 0x200 || (port[dev] & ~0x270)) {
+ snd_printk(KERN_ERR "incorrect port specified\n");
+ return 0;
+ }
+ if (dma8[dev] != SNDRV_AUTO_DMA &&
+ dma8[dev] != 1 && dma8[dev] != 3) {
+ snd_printk(KERN_ERR "dma8 must be 1 or 3\n");
+ return 0;
}
if (dma16[dev] != SNDRV_AUTO_DMA &&
dma16[dev] != 5 && dma16[dev] != 7) {
- snd_printk(KERN_ERR "dma16 must be 5 or 7");
+ snd_printk(KERN_ERR "dma16 must be 5 or 7\n");
+ return 0;
+ }
+ if (mpu_port[dev] != SNDRV_AUTO_PORT &&
+ (mpu_port[dev] & ~0x030) != 0x300) {
+ snd_printk(KERN_ERR "incorrect mpu_port specified\n");
+ return 0;
+ }
+ if (mpu_irq[dev] != SNDRV_AUTO_DMA &&
+ mpu_irq[dev] != 2 && mpu_irq[dev] != 3 &&
+ mpu_irq[dev] != 5 && mpu_irq[dev] != 7) {
+ snd_printk(KERN_ERR "mpu_irq must be 2, 3, 5 or 7\n");
return 0;
}
return 1;
diff --git a/sound/isa/sb/sb8_main.c b/sound/isa/sb/sb8_main.c
index 3222aed..7d84c9f 100644
--- a/sound/isa/sb/sb8_main.c
+++ b/sound/isa/sb/sb8_main.c
@@ -510,7 +510,8 @@ static int snd_sb8_open(struct snd_pcm_substream *substream)
}
switch (chip->hardware) {
case SB_HW_JAZZ16:
- runtime->hw.formats |= SNDRV_PCM_FMTBIT_S16_LE;
+ if (chip->dma16 == 5 || chip->dma16 == 7)
+ runtime->hw.formats |= SNDRV_PCM_FMTBIT_S16_LE;
runtime->hw.rates |= SNDRV_PCM_RATE_8000_48000;
runtime->hw.rate_min = 4000;
runtime->hw.rate_max = 50000;
--
1.6.4
----------------------------------------------------------------------
Sprawdz sekrety swojego biorytmu.
Kliknij >> http://link.interia.pl/f2534
More information about the Alsa-devel
mailing list