[alsa-devel] [PATCH 2/2] opti9xx: remove snd_opti9xx fields
Krzysztof Helt
krzysztof.h1 at poczta.fm
Wed Dec 2 18:13:42 CET 2009
From: Krzysztof Helt <krzysztof.h1 at wp.pl>
Remove snd_opti9xx fields which are indirect arguments to
the snd_opti9xx_configure(). Pass these values as function
arguments.
Signed-off-by: Krzysztof Helt <krzysztof.h1 at wp.pl>
---
sound/isa/opti9xx/opti92x-ad1848.c | 118 ++++++++++++++----------------------
1 files changed, 45 insertions(+), 73 deletions(-)
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index 7c97ca8..a4247f7 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -141,16 +141,6 @@ struct snd_opti9xx {
spinlock_t lock;
- long wss_base;
- int irq;
- int dma1;
- int dma2;
-
- long fm_port;
-
- long mpu_port;
- int mpu_irq;
-
#ifdef CONFIG_PNP
struct pnp_dev *dev;
struct pnp_dev *devmpu;
@@ -216,14 +206,6 @@ static int __devinit snd_opti9xx_init(struct snd_opti9xx *chip,
spin_lock_init(&chip->lock);
- chip->wss_base = -1;
- chip->irq = -1;
- chip->dma1 = -1;
- chip->dma2 = -1;
- chip->fm_port = -1;
- chip->mpu_port = -1;
- chip->mpu_irq = -1;
-
switch (hardware) {
#ifndef OPTi93X
case OPTi9XX_HW_82C928:
@@ -348,7 +330,10 @@ static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg,
(snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
-static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip)
+static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
+ long wss_base,
+ int irq, int dma1, int dma2,
+ long mpu_port, int mpu_irq)
{
unsigned char wss_base_bits;
unsigned char irq_bits;
@@ -416,7 +401,7 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip)
return -EINVAL;
}
- switch (chip->wss_base) {
+ switch (wss_base) {
case 0x530:
wss_base_bits = 0x00;
break;
@@ -430,14 +415,13 @@ static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip)
wss_base_bits = 0x02;
break;
default:
- snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n",
- chip->wss_base);
+ snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", wss_base);
goto __skip_base;
}
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30);
__skip_base:
- switch (chip->irq) {
+ switch (irq) {
//#ifdef OPTi93X
case 5:
irq_bits = 0x05;
@@ -456,11 +440,11 @@ __skip_base:
irq_bits = 0x04;
break;
default:
- snd_printk(KERN_WARNING "WSS irq # %d not valid\n", chip->irq);
+ snd_printk(KERN_WARNING "WSS irq # %d not valid\n", irq);
goto __skip_resources;
}
- switch (chip->dma1) {
+ switch (dma1) {
case 0:
dma_bits = 0x01;
break;
@@ -471,38 +455,36 @@ __skip_base:
dma_bits = 0x03;
break;
default:
- snd_printk(KERN_WARNING "WSS dma1 # %d not valid\n",
- chip->dma1);
+ snd_printk(KERN_WARNING "WSS dma1 # %d not valid\n", dma1);
goto __skip_resources;
}
#if defined(CS4231) || defined(OPTi93X)
- if (chip->dma1 == chip->dma2) {
+ if (dma1 == dma2) {
snd_printk(KERN_ERR "don't want to share dmas\n");
return -EBUSY;
}
- switch (chip->dma2) {
+ switch (dma2) {
case 0:
case 1:
break;
default:
- snd_printk(KERN_WARNING "WSS dma2 # %d not valid\n",
- chip->dma2);
+ snd_printk(KERN_WARNING "WSS dma2 # %d not valid\n", dma2);
goto __skip_resources;
}
dma_bits |= 0x04;
#endif /* CS4231 || OPTi93X */
#ifndef OPTi93X
- outb(irq_bits << 3 | dma_bits, chip->wss_base);
+ outb(irq_bits << 3 | dma_bits, wss_base);
#else /* OPTi93X */
snd_opti9xx_write(chip, OPTi9XX_MC_REG(3), (irq_bits << 3 | dma_bits));
#endif /* OPTi93X */
__skip_resources:
if (chip->hardware > OPTi9XX_HW_82C928) {
- switch (chip->mpu_port) {
+ switch (mpu_port) {
case 0:
case -1:
break;
@@ -520,12 +502,11 @@ __skip_resources:
break;
default:
snd_printk(KERN_WARNING
- "MPU-401 port 0x%lx not valid\n",
- chip->mpu_port);
+ "MPU-401 port 0x%lx not valid\n", mpu_port);
goto __skip_mpu;
}
- switch (chip->mpu_irq) {
+ switch (mpu_irq) {
case 5:
mpu_irq_bits = 0x02;
break;
@@ -540,12 +521,12 @@ __skip_resources:
break;
default:
snd_printk(KERN_WARNING "MPU-401 irq # %d not valid\n",
- chip->mpu_irq);
+ mpu_irq);
goto __skip_mpu;
}
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(6),
- (chip->mpu_port <= 0) ? 0x00 :
+ (mpu_port <= 0) ? 0x00 :
0x80 | mpu_port_bits << 5 | mpu_irq_bits << 3,
0xf8);
}
@@ -704,6 +685,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
{
static long possible_ports[] = {0x530, 0xe80, 0xf40, 0x604, -1};
int error;
+ int xdma2;
struct snd_opti9xx *chip = card->private_data;
struct snd_wss *codec;
#ifdef CS4231
@@ -718,39 +700,33 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
"OPTi9xx MC")) == NULL)
return -ENOMEM;
- chip->wss_base = port;
- chip->fm_port = fm_port;
- chip->mpu_port = mpu_port;
- chip->irq = irq;
- chip->mpu_irq = mpu_irq;
- chip->dma1 = dma1;
#if defined(CS4231) || defined(OPTi93X)
- chip->dma2 = dma2;
+ xdma2 = dma2;
#else
- chip->dma2 = -1;
+ xdma2 = -1;
#endif
- if (chip->wss_base == SNDRV_AUTO_PORT) {
- chip->wss_base = snd_legacy_find_free_ioport(possible_ports, 4);
- if (chip->wss_base < 0) {
+ if (port == SNDRV_AUTO_PORT) {
+ port = snd_legacy_find_free_ioport(possible_ports, 4);
+ if (port < 0) {
snd_printk(KERN_ERR "unable to find a free WSS port\n");
return -EBUSY;
}
}
- error = snd_opti9xx_configure(chip);
+ error = snd_opti9xx_configure(chip, port, irq, dma1, xdma2,
+ mpu_port, mpu_irq);
if (error)
return error;
#ifdef OPTi93X
- error = request_irq(chip->irq, snd_opti93x_interrupt,
+ error = request_irq(irq, snd_opti93x_interrupt,
IRQF_DISABLED, DEV_NAME" - WSS", chip);
if (error < 0) {
- snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", chip->irq);
+ snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", irq);
return error;
}
#endif
- error = snd_wss_create(card, chip->wss_base + 4, -1,
- chip->irq, chip->dma1, chip->dma2,
+ error = snd_wss_create(card, port + 4, -1, irq, dma1, xdma2,
#ifdef OPTi93X
WSS_HW_OPTI93X, WSS_HWSHARE_IRQ,
#else
@@ -759,7 +735,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
&codec);
if (error < 0) {
#ifdef OPTi93X
- free_irq(chip->irq, chip);
+ free_irq(irq, chip);
#endif
return error;
}
@@ -781,24 +757,24 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
sprintf(card->shortname, "OPTi %s", card->driver);
#if defined(CS4231) || defined(OPTi93X)
sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d",
- card->shortname, pcm->name, chip->wss_base + 4,
- chip->irq, chip->dma1, chip->dma2);
+ card->shortname, pcm->name, port + 4, irq, dma1, xdma2);
#else
sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d",
- card->shortname, pcm->name, chip->wss_base + 4,
- chip->irq, chip->dma1);
+ card->shortname, pcm->name, port + 4, irq, dma1);
#endif /* CS4231 || OPTi93X */
- if (chip->mpu_port <= 0 || chip->mpu_port == SNDRV_AUTO_PORT)
+ if (mpu_port <= 0 || mpu_port == SNDRV_AUTO_PORT)
rmidi = NULL;
- else
- if ((error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- chip->mpu_port, 0, chip->mpu_irq, IRQF_DISABLED,
- &rmidi)))
+ else {
+ error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
+ mpu_port, 0, mpu_irq, IRQF_DISABLED,
+ &rmidi);
+ if (error)
snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n",
- chip->mpu_port);
+ mpu_port);
+ }
- if (chip->fm_port > 0 && chip->fm_port != SNDRV_AUTO_PORT) {
+ if (fm_port > 0 && fm_port != SNDRV_AUTO_PORT) {
struct snd_opl3 *opl3 = NULL;
#ifndef OPTi93X
if (chip->hardware == OPTi9XX_HW_82C928 ||
@@ -808,9 +784,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
/* assume we have an OPL4 */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2),
0x20, 0x20);
- if (snd_opl4_create(card,
- chip->fm_port,
- chip->fm_port - 8,
+ if (snd_opl4_create(card, fm_port, fm_port - 8,
2, &opl3, &opl4) < 0) {
/* no luck, use OPL3 instead */
snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2),
@@ -818,12 +792,10 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
}
}
#endif /* !OPTi93X */
- if (!opl3 && snd_opl3_create(card,
- chip->fm_port,
- chip->fm_port + 2,
+ if (!opl3 && snd_opl3_create(card, fm_port, fm_port + 2,
OPL3_HW_AUTO, 0, &opl3) < 0) {
snd_printk(KERN_WARNING "no OPL device at 0x%lx-0x%lx\n",
- chip->fm_port, chip->fm_port + 4 - 1);
+ fm_port, fm_port + 4 - 1);
}
if (opl3) {
error = snd_opl3_hwdep_new(opl3, 0, 1, &synth);
--
1.6.4
----------------------------------------------------------------------
Do³aduj swój telefon!
Sprawdz >>> http://link.interia.pl/f24c2
More information about the Alsa-devel
mailing list