[alsa-devel] [PATCH 1/3] OMAP: McBSP: Use textual values in DMA operating mode sysfs files

[Jarkko Nikula]

On Mon, 24 Aug 2009 10:34:22 +0300
Eduardo Valentin <eduardo.valentin at nokia.com> wrote:

> > Are there need for case insensitive check? The sysfs_streq is not.
> 
> Yes, sysfs_streq is not. There is no need for the insensitive, but
> it can give user more options (ELEMENT or element)?
> 
> If using strcicmp, then strstrip would be required.
> 
> Just to reminder that strstrip does a wider job by cleaning any kind of
> spaces. sysfs_streq deals only with 1 leading "\n".
> 
Sounds too fancy :-)

Here with sysfs_streq. Clean and simple.

============================== CUT HERE ==============================
From: Jarkko Nikula <jhnikula at gmail.com>
Subject: [PATCH 1/3] OMAP: McBSP: Use textual values in DMA operating mode sysfs files

Use more descriptive than numerical value when showing and storing the
McBSP DMA operating mode. Show function is using similar syntax than e.g.
the led triggers so that all possible values for store function are
printed but with current value surrounded with square brackets.

Signed-off-by: Jarkko Nikula <jhnikula at gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi at nokia.com>
Cc: Eduardo Valentin <eduardo.valentin at nokia.com>
---
 arch/arm/plat-omap/mcbsp.c |   48 ++++++++++++++++++++++---------------------
 1 files changed, 25 insertions(+), 23 deletions(-)

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index b63a720..ee60ab6 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -1161,25 +1161,31 @@ static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
 THRESHOLD_PROP_BUILDER(max_tx_thres);
 THRESHOLD_PROP_BUILDER(max_rx_thres);
 
+static const char *dma_op_modes[] = {
+	"element", "threshold", "frame",
+};
+
 static ssize_t dma_op_mode_show(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
 	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
-	int dma_op_mode;
+	int dma_op_mode, i = 0;
+	ssize_t len = 0;
+	const char * const *s;
 
 	spin_lock_irq(&mcbsp->lock);
 	dma_op_mode = mcbsp->dma_op_mode;
 	spin_unlock_irq(&mcbsp->lock);
 
-	return sprintf(buf, "current mode: %d\n"
-			"possible mode values are:\n"
-			"%d - %s\n"
-			"%d - %s\n"
-			"%d - %s\n",
-			dma_op_mode,
-			MCBSP_DMA_MODE_ELEMENT, "element mode",
-			MCBSP_DMA_MODE_THRESHOLD, "threshold mode",
-			MCBSP_DMA_MODE_FRAME, "frame mode");
+	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
+		if (dma_op_mode == i)
+			len += sprintf(buf + len, "[%s] ", *s);
+		else
+			len += sprintf(buf + len, "%s ", *s);
+	}
+	len += sprintf(buf + len, "\n");
+
+	return len;
 }
 
 static ssize_t dma_op_mode_store(struct device *dev,
@@ -1187,26 +1193,22 @@ static ssize_t dma_op_mode_store(struct device *dev,
 				const char *buf, size_t size)
 {
 	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
-	unsigned long val;
-	int status;
+	const char * const *s;
+	int i = 0;
 
-	status = strict_strtoul(buf, 0, &val);
-	if (status)
-		return status;
+	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++)
+		if (sysfs_streq(buf, *s))
+			break;
 
-	spin_lock_irq(&mcbsp->lock);
+	if (i == ARRAY_SIZE(dma_op_modes))
+		return -EINVAL;
 
+	spin_lock_irq(&mcbsp->lock);
 	if (!mcbsp->free) {
 		size = -EBUSY;
 		goto unlock;
 	}
-
-	if (val > MCBSP_DMA_MODE_FRAME || val < MCBSP_DMA_MODE_ELEMENT) {
-		size = -EINVAL;
-		goto unlock;
-	}
-
-	mcbsp->dma_op_mode = val;
+	mcbsp->dma_op_mode = i;
 
 unlock:
 	spin_unlock_irq(&mcbsp->lock);
-- 
1.6.3.3