[alsa-devel] [PATCH V2 2/3] add set_tdm_slot in tdm dai to define the relationship between audio channel and tdm slot

[Barry Song]

On Tue, Aug 18, 2009 at 9:11 PM, Mark
Brown<broonie at opensource.wolfsonmicro.com> wrote:
> On Tue, Aug 18, 2009 at 10:53:39AM +0800, Barry Song wrote:
>> On Tue, Aug 18, 2009 at 1:50 AM, Mark
>> Brown<broonie at opensource.wolfsonmicro.com> wrote:
>
>> > I think what you're trying to describe here is that the device is
>> > expecting to see all the left channels on the bus followed by all the
>> > right channels?  This is the normal case for I2S TDM so no unusual
>> > configuration is required in order to implement it.
>
>> Do you mean you will extend TDM API to handle this? I can follow your
>> on-going changes.
>
> It's possible, though I'd not hold my breath since I don't have any
> systems which can use it.  Could you confirm which mode your device is
> operating in for this configuration - if it's I2S then there should be
> nothing needed.
>
The timing is like the attached diagram, I think it's not I2S but like DSP.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 1836.GIF
Type: image/gif
Size: 19139 bytes
Desc: not available
Url : http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20090819/29600dc2/attachment-0001.gif