[alsa-devel] Testers wanted: New SB X-Fi driver - POC for creative?
Ted T. Logan
tedtheologian at gmail.com
Wed Aug 5 20:17:31 CEST 2009
Takashi,
The latest snapshot has the same clicking/snapping. Can you give me
your POC for creative? I just cannot figure out why their driver works
fine and the alsa ones do not.
XFiDrv_Linux_Public_US_1.00.tar.gz
On Wed, 2009-08-05 at 04:31 -0500, Ted T. Logan wrote:
> I just CANNOT understand this. I disabled usb and hda-intel, updated
> to latest snapshot.
>
> with aplay, i get snaps every 1/2 second. This blows my mind.
>
> On Mon, 2009-07-20 at 07:37 +0200, Takashi Iwai wrote:
>
> > At Sun, 19 Jul 2009 19:38:59 -0500,
> > Ted T. Logan wrote:
> > >
> > > Thanks.
> > >
> > > Basically the driver from creative, the old one, works without clicks:
> > >
> > > XFiDrv_Linux_US-1.18.tar.gz
> > > >From April, 2008
> >
> > Where is it available?
> >
> > > and this one works without clicks.
> > >
> > > XFiDrv_Linux_Public_US_1.00.tar.gz
> >
> > So, do both versions work on yours?
> > What are the differences between them?
> >
> > > lspci lists it as:
> > > 03:03.0 Multimedia audio controller: Creative Labs SB X-Fi
> > >
> > > and in xp, it uses the same x-fi drivers as the others.
> > >
> > > I have never been able to get any driver you released to work with it.
> > >
> > > Can you tell me the first driver you had that you recommend I test it with?
> >
> > GIT is the easiest way. For example, look at the page below:
> > http://git.kernel.org/?p=linux/kernel/git/tiwai/sound-2.6.git;a=history;f=sound/pci/ctxfi;h=91c958a7e171313fe68d728a3b4860287ad40aa7;hb=HEAD
> >
> >
> > Takashi
> >
> > > On Sun, 2009-07-19 at 18:01 +0200, Takashi Iwai wrote:
> > >
> > > At Sun, 19 Jul 2009 10:35:21 -0500,
> > > Ted T. Logan wrote:
> > > >
> > > > Maybe you haven't been following the thread. I've been trying to debug the
> > > > problem. As I mentioned to Takashi, there's not a point where it broke, it
> > > > never worked with this driver.
> > > > There have always been clicks.
> > > >
> > > > However, it does not have clicks with the following driver:
> > > > XFiDrv_Linux_Public_US_1.00.tar.gz
> > > >
> > > > Sending out condescending messages like this after I was responding to the
> > > > "testers wanted" mailer which said all cards should be supported now is
> > > > completely unproductive.
> > >
> > > Well, the current situation is that I've got no other report but you
> > > regarding the specific problem. There is a known issue with openal,
> > > accordingly, but not all apps. So, this is very likely a different
> > > issue.
> > >
> > > Actually, it's still the phase to gather all information to know which
> > > part exactly is problematic. If you find any other guys that have the
> > > exact same problem, let me know. It would make easier to find out a
> > > problem pattern, either for finding out the culprit or reproducing the
> > > problem.
> > >
> > > Or, you can do trial-and-error by comparing the driver above and the
> > > current one (maybe the first committed version is easier to compare).
> > > This can't be done without the real hardware, so it's actually up to
> > > you how to fix the issue...
> > >
> > > Takashi
> > >
> > > >
> > > > On Thu, 2009-07-16 at 12:20 -0700, John L. Utz III wrote:
> > > >
> > > > Debug the problem, write code that fixes it and then send in a patch.
> > > > That's why this is the alsa *developers* mailing list.
> > > >
> > > > Ted T. Logan wrote:
> > > > > Takashi, please, what must I do to get your xfi driver to stop clicking?
> > > > >
> > > > > On Thu, 2009-07-16 at 11:22 +0200, Takashi Iwai wrote:
> > > > >
> > > > >> At Wed, 15 Jul 2009 12:55:23 +0200,
> > > > >> Frashman wrote:
> > > > >>> Hi Takashi,
> > > > >>>
> > > > >>> first of all, thank you for developing this driver.
> > > > >>> I tested it today. It works, so far.
> > > > >>>
> > > > >>> But two annoying things. As you mentioned, I got problems, if the
> > > > >>> onboard sound modules are loaded. Then i get no sound out auf my xfi.
> > > > >> It's likely the collision of PCI device ID.
> > > > >> Some X-Fi models support both HD-audio and emu20kx-native modes. The
> > > > >> modes are switched by some magical sequence.
> > > > >>
> > > > >> Anyway, please run alsa-info.sh with --no-upload option, and attach
> > > > >> the generated file.
> > > > >>
> > > > >>> If I disable the loading of snd-hda-intel modules while booting, then it
> > > > >>> works.
> > > > >>>
> > > > >>> The second problem is, that SIDE and SURROUND connectors are
> > > > >>> interchanged. I'm absolutly sure, it works fine under windows and the
> > > > >>> connector colors are also correct.
> > > > >>>
> > > > >>> If I run speaker-test -c8 the SIDE Speakers sounds come out of my REAR
> > > > >>> (SURROUND) Speakers, while nothing is coming out of my rear speakers, if
> > > > >>> i'm using speaker-test -c6
> > > > >> So, the side channels (channel 7 & 8) and the rear channels (3 & 4)
> > > > >> are swapped when running with 8 channel mode?
> > > > >>
> > > > >>
> > > > >> Takashi
> > > > >> _______________________________________________
> > > > >> Alsa-devel mailing list
> > > > >> Alsa-devel at alsa-project.org
> > > > >> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > > > > _______________________________________________
> > > > > Alsa-devel mailing list
> > > > > Alsa-devel at alsa-project.org
> > > > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
> > > > >
> > > >
> > > >
> > >
> > >
More information about the Alsa-devel
mailing list