[alsa-devel] [PATCH 6/8] ASoC: Factor out I2C 8 bit address 16 bit data I/O
Mark Brown
broonie at opensource.wolfsonmicro.com
Mon Aug 3 18:09:48 CEST 2009
As part of this refactoring the type of the CODEC hw_read operation
is changed to match the regular read operation.
Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
---
include/sound/soc.h | 2 +-
sound/soc/soc-cache.c | 79 ++++++++++++++++++++++++++++++++++++++++++++-----
2 files changed, 72 insertions(+), 9 deletions(-)
diff --git a/include/sound/soc.h b/include/sound/soc.h
index d0b29a5..4a5846e 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -373,7 +373,7 @@ struct snd_soc_codec {
size_t, unsigned int);
int (*volatile_register)(unsigned int);
hw_write_t hw_write;
- hw_read_t hw_read;
+ unsigned int (*hw_read)(struct snd_soc_codec *, unsigned int);
void *reg_cache;
short reg_cache_size;
short reg_cache_step;
diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c
index 8b12668..ab058b8 100644
--- a/sound/soc/soc-cache.c
+++ b/sound/soc/soc-cache.c
@@ -46,14 +46,82 @@ static int snd_soc_7_9_write(struct snd_soc_codec *codec, unsigned int reg,
return -EIO;
}
+static int snd_soc_8_16_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u16 *reg_cache = codec->reg_cache;
+ u8 data[3];
+
+ data[0] = reg;
+ data[1] = (value >> 8) & 0xff;
+ data[2] = value & 0xff;
+
+ if (!snd_soc_codec_volatile_register(codec, reg))
+ reg_cache[reg] = value;
+
+ if (codec->hw_write(codec->control_data, data, 3) == 3)
+ return 0;
+ else
+ return -EIO;
+}
+
+static unsigned int snd_soc_8_16_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *cache = codec->reg_cache;
+
+ if (reg >= codec->reg_cache_size ||
+ snd_soc_codec_volatile_register(codec, reg))
+ return codec->hw_read(codec, reg);
+ else
+ return cache[reg];
+}
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static unsigned int snd_soc_8_16_read_i2c(struct snd_soc_codec *codec,
+ unsigned int r)
+{
+ struct i2c_msg xfer[2];
+ u8 reg = r;
+ u16 data;
+ int ret;
+ struct i2c_client *client = codec->control_data;
+
+ /* Write register */
+ xfer[0].addr = client->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = 1;
+ xfer[0].buf = ®
+
+ /* Read data */
+ xfer[1].addr = client->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = 2;
+ xfer[1].buf = (u8 *)&data;
+
+ ret = i2c_transfer(client->adapter, xfer, 2);
+ if (ret != 2) {
+ dev_err(&client->dev, "i2c_transfer() returned %d\n", ret);
+ return 0;
+ }
+
+ return (data >> 8) | ((data & 0xff) << 8);
+}
+#else
+#define snd_soc_8_16_read_i2c NULL
+#endif
static struct {
int addr_bits;
int data_bits;
- int (*write)(struct snd_soc_codec *, unsigned int, unsigned int);
+ int (*write)(struct snd_soc_codec *codec, unsigned int, unsigned int);
unsigned int (*read)(struct snd_soc_codec *, unsigned int);
+ unsigned int (*i2c_read)(struct snd_soc_codec *, unsigned int);
} io_types[] = {
{ 7, 9, snd_soc_7_9_write, snd_soc_7_9_read },
+ { 8, 16,
+ snd_soc_8_16_write, snd_soc_8_16_read,
+ snd_soc_8_16_read_i2c },
};
/**
@@ -82,13 +150,6 @@ int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
{
int i;
- /* We don't support volatile registers yet - refactoring of
- * the hw_read operation will be required to do so. */
- if (codec->volatile_register) {
- printk(KERN_ERR "Volatile registers not yet supported\n");
- return -EINVAL;
- }
-
for (i = 0; i < ARRAY_SIZE(io_types); i++)
if (io_types[i].addr_bits == addr_bits &&
io_types[i].data_bits == data_bits)
@@ -111,6 +172,8 @@ int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
codec->hw_write = (hw_write_t)i2c_master_send;
#endif
+ if (io_types[i].i2c_read)
+ codec->hw_read = io_types[i].i2c_read;
break;
case SND_SOC_SPI:
--
1.6.3.3
More information about the Alsa-devel
mailing list