[alsa-devel] [RFC PATCH 5/5] ASoC: simplify the SSP DMA parameters settings by run-time generation
Eric Miao
eric.y.miao at gmail.com
Thu Apr 23 07:08:51 CEST 2009
The SSP DMA parameters can actually be easily generated at run-time since
they are almost similar except for the FIFO width and direction. Another
benefit is the re-use of information from 'struct ssp_device', like SSDR
physical FIFO address and DRCMR register index for both directions.
Signed-off-by: Eric Miao <eric.miao at marvell.com>
---
sound/soc/pxa/pxa-ssp.c | 206 ++++++++++-------------------------------------
1 files changed, 43 insertions(+), 163 deletions(-)
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 2ce4fb6..fb7235b 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -50,139 +50,6 @@ struct ssp_priv {
#endif
};
-#define PXA2xx_SSP1_BASE 0x41000000
-#define PXA27x_SSP2_BASE 0x41700000
-#define PXA27x_SSP3_BASE 0x41900000
-#define PXA3xx_SSP4_BASE 0x41a00000
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_out = {
- .name = "SSP1 PCM Mono out",
- .dev_addr = PXA2xx_SSP1_BASE + SSDR,
- .drcmr = &DRCMR(14),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_in = {
- .name = "SSP1 PCM Mono in",
- .dev_addr = PXA2xx_SSP1_BASE + SSDR,
- .drcmr = &DRCMR(13),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_out = {
- .name = "SSP1 PCM Stereo out",
- .dev_addr = PXA2xx_SSP1_BASE + SSDR,
- .drcmr = &DRCMR(14),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_in = {
- .name = "SSP1 PCM Stereo in",
- .dev_addr = PXA2xx_SSP1_BASE + SSDR,
- .drcmr = &DRCMR(13),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_out = {
- .name = "SSP2 PCM Mono out",
- .dev_addr = PXA27x_SSP2_BASE + SSDR,
- .drcmr = &DRCMR(16),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_in = {
- .name = "SSP2 PCM Mono in",
- .dev_addr = PXA27x_SSP2_BASE + SSDR,
- .drcmr = &DRCMR(15),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_out = {
- .name = "SSP2 PCM Stereo out",
- .dev_addr = PXA27x_SSP2_BASE + SSDR,
- .drcmr = &DRCMR(16),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_in = {
- .name = "SSP2 PCM Stereo in",
- .dev_addr = PXA27x_SSP2_BASE + SSDR,
- .drcmr = &DRCMR(15),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_out = {
- .name = "SSP3 PCM Mono out",
- .dev_addr = PXA27x_SSP3_BASE + SSDR,
- .drcmr = &DRCMR(67),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_in = {
- .name = "SSP3 PCM Mono in",
- .dev_addr = PXA27x_SSP3_BASE + SSDR,
- .drcmr = &DRCMR(66),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_out = {
- .name = "SSP3 PCM Stereo out",
- .dev_addr = PXA27x_SSP3_BASE + SSDR,
- .drcmr = &DRCMR(67),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_in = {
- .name = "SSP3 PCM Stereo in",
- .dev_addr = PXA27x_SSP3_BASE + SSDR,
- .drcmr = &DRCMR(66),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_out = {
- .name = "SSP4 PCM Mono out",
- .dev_addr = PXA3xx_SSP4_BASE + SSDR,
- .drcmr = &DRCMR(67),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_in = {
- .name = "SSP4 PCM Mono in",
- .dev_addr = PXA3xx_SSP4_BASE + SSDR,
- .drcmr = &DRCMR(66),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH2,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_out = {
- .name = "SSP4 PCM Stereo out",
- .dev_addr = PXA3xx_SSP4_BASE + SSDR,
- .drcmr = &DRCMR(67),
- .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
-static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_in = {
- .name = "SSP4 PCM Stereo in",
- .dev_addr = PXA3xx_SSP4_BASE + SSDR,
- .drcmr = &DRCMR(66),
- .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
- DCMD_BURST16 | DCMD_WIDTH4,
-};
-
static void dump_registers(struct ssp_device *ssp)
{
dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
@@ -194,25 +61,33 @@ static void dump_registers(struct ssp_device *ssp)
ssp_read_reg(ssp, SSACD));
}
-static struct pxa2xx_pcm_dma_params *ssp_dma_params[4][4] = {
- {
- &pxa_ssp1_pcm_mono_out, &pxa_ssp1_pcm_mono_in,
- &pxa_ssp1_pcm_stereo_out, &pxa_ssp1_pcm_stereo_in,
- },
- {
- &pxa_ssp2_pcm_mono_out, &pxa_ssp2_pcm_mono_in,
- &pxa_ssp2_pcm_stereo_out, &pxa_ssp2_pcm_stereo_in,
- },
- {
- &pxa_ssp3_pcm_mono_out, &pxa_ssp3_pcm_mono_in,
- &pxa_ssp3_pcm_stereo_out, &pxa_ssp3_pcm_stereo_in,
- },
- {
- &pxa_ssp4_pcm_mono_out, &pxa_ssp4_pcm_mono_in,
- &pxa_ssp4_pcm_stereo_out, &pxa_ssp4_pcm_stereo_in,
- },
+struct pxa2xx_pcm_dma_data {
+ struct pxa2xx_pcm_dma_params params;
+ char name[20];
};
+static struct pxa2xx_pcm_dma_params *
+ssp_get_dma_params(struct ssp_device *ssp, int stereo, int out)
+{
+ struct pxa2xx_pcm_dma_data *dma;
+
+ dma = kzalloc(sizeof(struct pxa2xx_pcm_dma_data), GFP_KERNEL);
+ if (dma == NULL)
+ return NULL;
+
+ snprintf(dma->name, 20, "SSP%d PCM %s %s", ssp->port_id,
+ stereo ? "Stereo" : "Mono", out ? "out" : "in");
+
+ dma->params.name = dma->name;
+ dma->params.drcmr = &DRCMR(out ? ssp->drcmr_tx : ssp->drcmr_rx);
+ dma->params.dcmd = (out ? (DCMD_INCSRCADDR | DCMD_FLOWTRG) :
+ (DCMD_INCTRGADDR | DCMD_FLOWSRC)) |
+ (stereo ? DCMD_WIDTH4 : DCMD_WIDTH2) | DCMD_BURST16;
+ dma->params.dev_addr = ssp->phys_base + SSDR;
+
+ return &dma->params;
+}
+
static int pxa_ssp_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
@@ -225,6 +100,11 @@ static int pxa_ssp_startup(struct
snd_pcm_substream *substream,
clk_enable(priv->ssp->clk);
ssp_disable(priv->ssp);
}
+
+ if (cpu_dai->dma_data) {
+ kfree(cpu_dai->dma_data);
+ cpu_dai->dma_data = NULL;
+ }
return ret;
}
@@ -239,6 +119,11 @@ static void pxa_ssp_shutdown(struct
snd_pcm_substream *substream,
ssp_disable(priv->ssp);
clk_disable(priv->ssp->clk);
}
+
+ if (cpu_dai->dma_data) {
+ kfree(cpu_dai->dma_data);
+ cpu_dai->dma_data = NULL;
+ }
}
#ifdef CONFIG_PM
@@ -611,25 +496,20 @@ static int pxa_ssp_hw_params(struct
snd_pcm_substream *substream,
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
struct ssp_priv *priv = cpu_dai->private_data;
struct ssp_device *ssp = priv->ssp;
- int dma = 0, chn = params_channels(params);
+ int chn = params_channels(params);
u32 sscr0;
u32 sspsp;
int width = snd_pcm_format_physical_width(params_format(params));
int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf;
- /* select correct DMA params */
- if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
- dma = 1; /* capture DMA offset is 1,3 */
- /* Network mode with one active slot (ttsa == 1) can be used
- * to force 16-bit frame width on the wire (for S16_LE), even
- * with two channels. Use 16-bit DMA transfers for this case.
- */
- if (((chn == 2) && (ttsa != 1)) || (width == 32))
- dma += 2; /* 32-bit DMA offset is 2, 16-bit is 0 */
-
- cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma];
+ printk("%s\n", __func__);
+ /* generate correct DMA params */
+ if (cpu_dai->dma_data)
+ kfree(cpu_dai->dma_data);
- dev_dbg(&ssp->pdev->dev, "pxa_ssp_hw_params: dma %d\n", dma);
+ cpu_dai->dma_data = ssp_get_dma_params(ssp,
+ ((chn == 2) && (ttsa != 1)) || (width == 32),
+ substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
/* we can only change the settings if the port is not in use */
if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
--
1.6.0.4
More information about the Alsa-devel
mailing list